Search Results


Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
2008
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Electrical Products
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Generalities
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
Health and Safety
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
Mechanical Equipment and Packaging
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
Quality
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
Technical Drawings
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
Telecommunications
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
Textiles
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
Tourism
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Compulsory
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Voluntary
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Current
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request