Search Results


Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 1 70 400. 1989Code of Practice for the Assessment, Licensing and Classification of Hotel AccommodationTourism1989VoluntaryWithdrawnSets out the procedures by which hotels are to be assessed and licensed, and the criteria by which... Read MoreTT $74.00
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 16 05 000-1985Building and Civil Engineering General Vocabulary- Part 1Construction Products1985VoluntaryWithdrawnDefines terms applicable to building and civil engineering works. TT $74.00
TTS 16 35 503-1978Specification for Hard Drawn Mild Steel Wire for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnSpecifies hard-drawn mild steel wire, which may be either plain or deformed, intended for use in... Read MoreTT $34.00
TTS 16 35 504.1978Specification for Steel Fabric for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnApplies to factory-made fabric for reinforcement of concrete, formed by the welding of plain,... Read MoreTT $34.00
TTS 16 35 509:1982Specification for Non-Load Bearing Concrete Masonry UnitsConstruction Products1982VoluntaryWithdrawnSpecifies requirements for hollow non-load bearing concrete masonry units made from Portland... Read MoreTT $34.00
TTS 16 35 510-1986Specification for Hollow Clay BlocksConstruction Products1986VoluntaryWithdrawnSpecifies requirements for hollowed blocks made from fired clay. Covers the general quality,... Read MoreTT $34.00Replaced by TTS 588:2015
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 16 40 400-1.1991Methods of Measurement and Evaluation of Defects in Timber - Part 1: LogsConstruction Products1991VoluntaryWithdrawnSpecifies methods of identification, measurement and quantitative evaluation of commonly occurring... Read MoreTT $47.00
TTS 16 66 501.1984Requirements for the Care and Use of Portable Timber LaddersConstruction Products1984VoluntaryWithdrawnSpecifies requirements for the care and use of portable timber ladders. TT $34.00
TTS 16 80 300-1. 1991Methods of Test for Unplasticized Pipes and Fittings: Part 1: Determining the Softening Point of UPVC Pipes and FittingsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out the method for determining the softening point of unplasticized PVC pipes and fittingsTT$34.00
TTS 16 80 300-2. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 2: Longitudinal Reversion Test Methods and SpecificationMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the methods to be used for the determination of the longitudinal reversion of... Read MoreTT$34.00
TTS 16 80 300-3. 1991Methods of Test for Unplasticized PVC Pipes And Fittings: Part 3: Determining the Fracture Toughness of UPVC PipesMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-4. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 4: Effect of Sulphuric Acid - Requirement And Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-5. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 5: Specification and Measurement of OpacityMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the opacity of unplasticized polyvinyl chloride (PVC)... Read MoreTT$34.00
TTS 16 80 300-6. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 6: Extractability of Lead and Tin - Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method of test for the determination of the extractability of certain stabilizers of... Read MoreTT$34.00
TTS 16 80 300-7. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 7: Determination and Specification of Resistance to External BlowsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the apparatus and the procedure to be applied for the determination of the resistance to... Read MoreTT$34.00
TTS 16 80 300-8. 1991Methods of Test for Unplasticized PVC Pipes: Part 8: Method for Hydrostatic Pressure Testing of UPVC - Short-Term TestsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 16 80 300-9. 1991Methods of Test for Unplasticized PVC Pipes: Part 9: Methods of Test for Hydrostatic Pressure Testing of UPVC Pipes - Long Term TestMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 171:PART 1:2002Trinidad and Tobago Electrical Wiring Code - Part 1 - Low Voltage Installations (Including Amendment 1 (2007))Electrical Codes2002VoluntaryWithdrawnLays down requirements for the installation, inspection, testing and maintenance of electrical... Read More$150.00Includes Amendment 1 (2007) TTS 171:Part 1:2002 is under revision.
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 179:2005Lead-Acid Starter Batteries - Specification (2nd Revision)Electrical Products2005CompulsoryWithdrawnThis standard specifies requirements and test methods for vented and valve regulated lead-acid... Read MoreTT $300.00Replaced by TTS/IEC 60095-1:2014
TTS 21 10 500 -7: 1980Requirements for Labelling - Labelling of TextilesTextiles1980CompulsoryWithdrawnPrescribes the requirements for the labelling and advertising of textiles and certain consumer... Read MoreTT $34.00
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 10 500-5: 1985Requirements for Labelling- Care Labelling of Textile ArticlesTextiles1985CompulsoryWithdrawnEstablishes a system of graphical symbols intended for use in the labeling of textile articles to... Read MoreTT $34.00
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 10 504. 1979Requirements for the Grading and Labelling of Table EggsAgriculture1979VoluntaryWithdrawnGives guidelines for grading and labeling of table eggs intended for retail trade according to mass... Read MoreTT $34.00
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 10 508. 1985Fertilizers - Marking - Presentation and DeclarationsAgriculture1985VoluntaryWithdrawnSpecifies the procedure for marking containers or labels for fertilizers, where national... Read MoreTT $34.00
TTS 21 20 500-3. 1984Requirements for Advertising - Advertising of Tobacco ProductsConsumer Products1984VoluntaryWithdrawnRegulates advertising of tobacco products by press, radio, television, cinema, posters and other... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 003: 1988Textiles - Stitch Types - Classification and TerminologyTextiles1988VoluntaryWithdrawnClassifies, designates, describes and illustrates the various kinds of stitch types used in hand... Read MoreTT$94.00
TTS 21 40 004: 1988Textiles - Seam Types - Classification and TerminologyTextiles1988VoluntaryWithdrawnClassifies, illustrates and designates the various kinds of the most used stitched seams... Read MoreTT$135.00
TTS 21 40 005: 1988Determination of Mass - VocabularyTextiles1988VoluntaryWithdrawnDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreTT $34.00
TTS 21 40 006: 1988Textiles - Natural Fibres General Names and DefinitionsTextiles1988VoluntaryWithdrawnGives the generic names and definitions of the most important natural fibres according to their... Read MoreTT$34.00
TTS 21 40 007: 1988Textile Floor Coverings - Classification and TerminologyTextiles1988VoluntaryWithdrawnGives definitions of terms relating to textile floor coverings, and defines categories of these... Read MoreTT$47.00
TTS 21 40 008: 1988Burning Behaviour of Textiles and Textile Products - VocabularyTextiles1988VoluntaryWithdrawnDefines terms used in testing the burning behaviour of textiles and textile productsTT $34.00
TTS 21 40 009: 1988Textile - Designation of YarnsTextiles1988VoluntaryWithdrawnSpecifies two methods of indicating the composition of yarns, whether single, folded, cabled or... Read MoreTT $34.00
TTS 21 40 010: 1988Textiles - Universal System for Designating Linear Density (Tex System)Textiles1988VoluntaryWithdrawnGives the principles and recommended units of the Tex System for the expression of linear density.TT $34.00
TTS 21 40 200: 1988Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles1988VoluntaryWithdrawnSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreTT$34.00
TTS 21 40 201: 1988Textile Fibres - Some Methods of Sampling for TestingTextiles1988VoluntaryWithdrawnSpecifies several methods for preparing laboratory samples of fibers.TT$34.00
TTS 21 40 202: 1988Machine - Made Textile Floor Coverings - Sampling and Cutting Specimens for Physical TestsTextiles1988VoluntaryWithdrawnSpecifies a procedure to be followed when samples are taken either from a bulk supply of... Read MoreTT$34.00
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 21 40 301-1: 1988Textiles - Tests for Colour Fastness - General Principles of TestingTextiles1988VoluntaryWithdrawnProvides general information about the methods for testing colour fastness of textiles for the... Read MoreTT$34.00
TTS 21 40 301-10: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Heat TreatmentsTextiles1988VoluntaryWithdrawnTextiles- Tests for colour fastness- Colour fastness to heat treatmentsTT$34.00
TTS 21 40 301-11: 1988Textiles - Tests for Colour Fastness - Colour Fastness to VulcanizingTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of coloured textiles to vulcanizingTT$34.00
TTS 21 40 301-12: 1988Textiles - Test for Colour Fastness - Test Not Covered in Parts 1 through 11 or Part 13Textiles1988VoluntaryWithdrawnThere is no information on this standard0
TTS 21 40 301-13: 1988Textiles - Tests for Colour Fastness - Colourant CharacteristicsTextiles1988VoluntaryWithdrawnSpecifies a method to determine the effect on the colour of a dye, of dyeing in the presence of... Read MoreTT $34.00
TTS 21 40 301-2: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Light and WeatheringTextiles1988VoluntaryWithdrawnSpecifies a method intended for determining the resistance of the colour of textiles to the action... Read MoreTT $34.00
TTS 21 40 301-3: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Washing and LaunderingTextiles1988VoluntaryWithdrawnProvides a series of tests that have been established to investigate the fastness to washing and... Read MoreTT $34.00
TTS 21 40 301-5: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Aqueous AgenciesTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of the colour of textiles to immersion in aqueous... Read MoreTT $34.00
TTS 21 40 301-6: 1988Textiles- Tests For Colour Fastness- Standard Adjacent FabricsTextiles1988VoluntaryWithdrawnEstablishes general requirements for undyed adjacent fabrics which may be used for the assessment... Read MoreTT $34.00
TTS 21 40 301-7: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Atmospheric ContaminantsTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of colour of textiles to atmospheric contaminantsTT $34.00
TTS 21 40 301-8: 1988Textiles - Tests for Colour Fastness - Measurement of Colour and Colour DifferencesTextiles1988VoluntaryWithdrawnSpecifies a method for measuring the colour difference between two specimens of textile in any formTT $34.00
TTS 21 40 301-9: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Bleaching AgenciesTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of colour in textiles to bleaching agenciesTT $34.00
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 303: 1988Textiles - Binary Fibre Mixtures - Quantitative Chemical AnalysisTextiles1988VoluntaryWithdrawnProvides methods for the quantitative chemical analysis of various binary mixtures of fibres in... Read MoreTT $47.00
TTS 21 40 304: 1988Textiles - Determination of Twist in Yarns - Direct Counting MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the direction of twist in terms of turns per unit... Read MoreTT$34.00
TTS 21 40 305: 1988Textiles - Yarn from Packages - Method of Determination of Breaking Load and Elongation at the Breaking Load ff Single Strands (CRL, CRE and CRT Testers)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the breaking load and breaking elongation of various... Read MoreTT $34.00
TTS 21 40 306: 1988 Textiles - Determination of Bursting Distension - Diaphragm MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the bursting strength and bursting distension of... Read MoreTT $34.00
TTS 21 40 307: 1988Textiles - Determination of PH of the Aqueous ExtractTextiles1988VoluntaryWithdrawnSpecifies a method for determining the pH value of the aqueous extract of textilesTT $34.00
TTS 21 40 309: 1988Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles1988VoluntaryWithdrawnSpecifies methods for the determination of the mass per unit length and the mass per unit area of... Read MoreTT $34.00
TTS 21 40 310: 1988Textile - Woven Fabrics - Measurement of Width of PiecesTextiles1988VoluntaryWithdrawnSpecifies two methods for the determination of the width of pieces of woven fabrics that are in the... Read MoreTT $34.00
TTS 21 40 311: 1988Textiles - Woven Fabrics - Measurement of Length of PiecesTextiles1988VoluntaryWithdrawnSpecifies two methods for the determination of the length of pieces of woven fabrics made up full... Read MoreTT $34.00
TTS 21 40 312: 1988Textiles - Determination of Dimensional Change in Washing and DryingTextiles1988VoluntaryWithdrawnSpecifies a method for determination of dimensional change of fabrics, garments or other textile... Read MoreTT $34.00
TTS 21 40 313: 1988Textiles - Woven Fabrics - Determination of Breaking Strength - and Elongation (Strip Method)Textiles1988VoluntaryWithdrawnSpecifies a method known as the (strip) method, for the determination of the breaking strength and... Read More0
TTS 21 40 314: 1988Textiles - Woven Fabrics - Determination of Breaking Strength- Grab MethodTextiles1988VoluntaryWithdrawnSpecifies a method known as the (grab)method, for the determination of the breaking strength of... Read MoreTT $34.00
TTS 21 40 315: 1988Textiles - Ternary Fibre Mixtures - Quantitative AnalysesTextiles1988VoluntaryWithdrawnSpecifies methods of quantitative analysis of various ternary mixtures of fibresTT $34.00
TTS 21 40 317: 1988Textiles - Domestic Washing And Drying Procedures For Textile TestingTextiles1988VoluntaryWithdrawnSpecifies domestic washing and drying procedures for textile testing of fabrics, garments or other... Read MoreTT $34.00
TTS 21 40 318: 1988Textiles - Yarn from Packages - Method of Test for Breaking Strength of Yarn - Skein MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the breaking strength of yarn. This method is referred... Read MoreTT $34.00
TTS 21 40 319: 1988Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the dimensional change (shrinkage or stretch) of all... Read MoreTT $34.00
TTS 21 40 320: 1988Carpets - Determination of Number of Tufts and /or Loops Per Unit Length and Per Unit AreaTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the number of tufts and/or loops per unit length and... Read MoreTT $34.00
TTS 21 40 321: 1988Machine - Made Textile Floor Coverings - Determination of ThicknessTextiles1988VoluntaryWithdrawnSpecifies a basic method for the determination of the thickness of machine-made textile floor... Read MoreTT $34.00
TTS 21 40 322: 1988Carpets - Determination of Thickness of Pile Above the BackingTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the thickness of pile above the substrate of a textile... Read MoreTT $34.00
TTS 21 40 323: 1988Textile Fibres - Determination of Linear Density - Gravimetric MethodTextiles1988VoluntaryWithdrawnSpecifies a gravimetric method for the determination of the linear density of textile fibres cut... Read MoreTT $34.00
TTS 21 40 324: 1988Textiles - Yarn From Packages - Determination of Linear Density Mass Per Unit Length (Skein Method)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the linear density of all types of yarn in package... Read MoreTT $34.00
TTS 21 40 326: 1988Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of RecoveryTextiles1988VoluntaryWithdrawnSpecifies a method for determining the angle of recovery of fabrics from creasingTT $34.00
TTS 21 40 327: 1988Machine - Made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat ConditionsTextiles1988VoluntaryWithdrawnSpecifies a procedure for the determination of the dimensional changes that take place when... Read MoreTT $34.00
TTS 21 40 328: 1988Rectangular Textile Floor Coverings - Determination of DimensionsTextiles1988VoluntaryWithdrawnSpecifies a method for determining the dimensions of a rectangular textile floor covering, both... Read MoreTT $34.00
TTS 21 40 329: 1988Textiles - Determination of Dimensional Change on Dry Cleaning in Perchlorethylene - Machine MethodTextiles1988VoluntaryWithdrawnSpecifies a dry cleaning procedure, using a commercial dry-cleaning machine, for the determination... Read MoreTT $34.00
TTS 21 40 331: 1988Textiles Floor Coverings - Determination of Thickness Loss After Prolonged, Heavy Static LoadingTextiles1988VoluntaryWithdrawnSpecifies a method for determination of thickness loss of textile floor coverings after prolonged,... Read MoreTT $34.00
TTS 21 40 332: 1988Textiles - Determination of Thickness of Woven and Knitted Fabrics (Other than Textile Floor Coverings)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the thickness, when under a specific pressure, of woven... Read MoreTT $34.00
TTS 21 40 333-1: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles1988VoluntaryWithdrawnDeals with recording of fabric weaves and makes provision for showing the sequence in which yarns... Read MoreTT $34.00
TTS 21 40 333-2: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 2 - Determination of Number of Threads Per Unit LengthTextiles1988VoluntaryWithdrawnSpecifies three methods for the determination of the number of threads per centimeter in woven... Read MoreTT $34.00
TTS 21 40 333-3: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 3 - Determination of Crimp Yarn in FabricTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of crimp of yarn in fabricTT $34.00
TTS 21 40 333-4: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 4 - Determination of Twist in Yarn Removed from FabricTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of twist in yarns, spun on conventional systems removed... Read MoreTT $34.00
TTS 21 40 333-5: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 5 - Determination of Linear Density of Yarn Removed from FabricTextiles1988VoluntaryWithdrawnSpecifies method for the determination of linear density of yarn removed from fabricTT $34.00
TTS 21 40 333-6: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles1988VoluntaryWithdrawnSpecifies methods for determining the mass of warp and weft threads per unit area of fabric after... Read MoreTT $34.00
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 21 40 506: 1988Textiles - Woven Fabric DescriptionsTextiles1988VoluntaryWithdrawnGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreTT $34.00
TTS 21 43 300: 1984Ropes - Sampling and Conditioning for TestingTextiles1984VoluntaryWithdrawnSpecifies the conditions of sampling of ropes for testingTT $34.00
TTS 21 43 500: 1984Ropes and Cordage - Colour Codes for IdentificationTextiles1984VoluntaryWithdrawnSpecifies a code of colors design for the identification marking of ropes and cordage appearing in... Read MoreTT $34.00
TTS 21 43 501: 1984Three or Four-Strand Manila and Sisal RopesTextiles1984VoluntaryWithdrawnSpecifies the essential characteristics of three or four-strand manila and sisal ropesTT $34.00
TTS 21 43 502: 1984Three-Strand (Hawser-Laid) and Eight-Strand (Plaited) Polypropylene Monofilament or Film Ropes - Required CharacteristicsTextiles1984VoluntaryWithdrawnDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read More
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 21 60 401: 1985Guide to the Assessment of Garment QualityTextiles1985VoluntaryWithdrawnProvides a uniform system of reference data on the various constructional features, finishing and... Read MoreTT $34.00
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 22:PART 1:2006Requirements for Tourist Accommodation Part 1: Hotels and GuesthousesTourism2006VoluntaryWithdrawnSpecifies the minimum requirements for hotels and guesthouses operating in Trinidad and Tobago.... Read MoreTT $135.00
TTS 22:PART 2:2008Requirements for Tourist Accommodation - Part 2: Bed and Breakfast and Self Catering FacilitiesTourism2008VoluntaryWithdrawnThis Trinidad and Tobago standard provides the minimum requirements for Bed and Breakfast and... Read MoreTT $200.00
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 26 20 000.1987 Glossary of Electrotechnical, Power Telecommunication, Electronics, Lighting and Colour Terms: Terms Particular to Power Engineering; Electric Cable TechnologyElectrical Products1987VoluntaryWithdrawnTT $47.00
TTS 26 20 400. 1978Schedule for Preferred Values for Resistors and CapacitorsElectrical Products1978VoluntaryWithdrawnGives a series of preferred values based on the 10/12 system (E series) for the resistance of fixed... Read MoreTT $34.00
TTS 26 20 503. 1984Basic Requirements for Electro-Technical EquipmentElectrical Products1984VoluntaryWithdrawnSpecifies basic requirements for three classes of passive and active electrotechnical components... Read MoreTT $47.00
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 45 500. 1985Safety Requirements for Mains Operated Electronic and Related EquipmentElectrical Products1985VoluntaryWithdrawnTT $34.00
TTS 26 45 501. 1977Basic Requirements for Mains Operated Electrotechnical EquipmentElectrical Products1977VoluntaryWithdrawnSpecifies basic requirements for mains-operated electrotechnical apparatus for indoor and outdoor... Read MoreTT $34.00
TTS 26 45 502-1983Limits for Radio InterferenceTelecommunications1983VoluntaryWithdrawnSpecifies limits for the radio interference voltages and field strengths in the frequency range... Read MoreTT$34.00
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 296: 2005Electric Cables - PVC Insulated, Non-Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2005VoluntaryWithdrawnTT $1200.00
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 31 05 402. 1983SI Units and Recommendations for the Use of their Multiples and of Certain Other UnitsMetrology1983VoluntaryWithdrawnDescribes the International System of Units, recommends selected decimal multiples and... Read MoreTT$34.00
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 31 20 000. 1991Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology1991VoluntaryWithdrawnDefines three types of standard atmosphereTT $34.00
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 31 20 501. 1991Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology1991VoluntaryWithdrawnGives specifications for three types of standard atmosphereTT $34.00
TTS 31 20 503. 1991Preferred Test TemperaturesMetrology1991VoluntaryWithdrawnSpecifies preferred temperatures for use in testingTT $34.00
TTS 31 45 502.1986Diameter of Clearance Holes and Counterbores for Bolts and ScrewsConstruction Products1986VoluntaryWithdrawnSpecifies the diameters of clearance holes and counterbores for bolts and machine screws for... Read MoreTT $34.00
TTS 31 50 500. 1983Basic Requirements for Full-Flow Lubrication Oil Filters for Internal Combustion EnginesMechanical Equipment and Packaging1983VoluntaryWithdrawnSpecifies the requirements, sampling and testing procedures for full flow oil lubricating filters... Read More$34.00
TTS 31 60 303. 1986Dynamic Test Methods of Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies dynamic test method of seat belt assemblies for automobiles in accordance with provisions... Read MoreTT$34.00
TTS 31 60 304-1. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Adjustment DutyMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing, including that intended... Read MoreTT$34.00
TTS 31 60 304-10. 1986Methods of Testing Seat Belts: Determination of Static Strength and Dummy DisplacementMechanical Equipment and Packaging1986VoluntaryWithdrawnEstablishes a method for determining the static strength of a retractor, or seat belt assembly, or... Read MoreTT$34.00
TTS 31 60 304-11. 1986Methods of Testing Seat Belts: Determination of Webbing Retraction ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the webbing retracting force of a seat belt retractor0
TTS 31 60 304-12. 1986Methods of Testing Seat Belts: Determination of Retractor Locking Under AccelerationMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out methods for determining the locking response of a retractor under various conditions of... Read MoreTT$34.00
TTS 31 60 304-13. 1986Testing: Determination of Dynamic PerformanceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the dynamic performance of a seat belt assemblyTT$34.00
TTS 31 60 304-2. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Withdrawing and Retracting duty through a Sash GuideMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing passing through a sash... Read MoreTT$34.00
TTS 31 60 304-3 1986Methods of Testing Seat Belts: Determination of Fatigue Resistance of a Flexible MemberMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the effects of fatigue on flexible load bearing members designed... Read MoreTT$34.00
TTS 31 60 304-4. 1986Methods of Testing Seat Belts: Determination of Potential for Inadvertent Buckle ReleaseMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the potential for release of the buckle through inadvertent... Read MoreTT$34.00
TTS 31 60 304-5. 1986Methods of Testing Seat Belts: Determination of Fatigue Effect on Buckle Release ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the reduction of the release force due to fatigue of any spring... Read More0
TTS 31 60 304-6. 1986Methods of Testing Seat Belts: Determination of Adjustment Device ForcesMechanical Equipment and Packaging1986VoluntaryWithdrawnGives a method for determining the forces required to draw webbing through an adjustment device to... Read MoreTT$34.00
TTS 31 60 304-7. 1986Methods of Testing Seat Belts: Determination of Locking Angle of Tilt-Lock Adjustment DeviceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the angle between the adjustment device base and the webbing... Read MoreTT$34.00
TTS 31 60 304-8. 1986Methods of Testing Seat Belts: Determination of Free-End Device StrengthMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the endurance of a seat belt free-end restraint device when... Read More0
TTS 31 60 304-9. 1986Methods of Testing Seat Belts: Preparation and Conditioning of Test Specimens for Retractor FunctionMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for conditioning a seat belt retractor prior to testing for retractor functionTT$34.00
TTS 31 60 503. 1991Requirements and Methods of Test for Spark PlugsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies requirements and methods of test for spark plugs used in internal combustion engines.... Read MoreTT $34.00
TTS 31 60 504-1. 1991Main Dimensions of Spark Plugs for Road Vehicles - M14 X 1,25 Spark Plugs with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1.25 spark plugs with flat seating with normal or long... Read MoreTT$34.00
TTS 31 60 504-2. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M14 X 1,25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 X 1,25 spark plugs with conical seating with normal long... Read MoreTT$34.00
TTS 31 60 504-3. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M18 X 1,5 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of M18 X 1,5 spark plugs with conical seating and their cylinder... Read MoreTT$34.00
TTS 31 60 504-4. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 With Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of compact spark plugs M14 X 1,25 with flat seating and their... Read MoreTT$34.00
TTS 31 60 504-5. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1,25 compact spark plugs with conical seating and their... Read MoreTT$34.00
TTS 31 60 504-6. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M10 X 1 with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M10 x 1 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
TTS 31 60 504-7. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M12 X 1.25 with Flat SeatingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M12 x 1,25 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
TTS 31 60 505-1986Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the seat belt assemblies for automobiles to accommodate one adult and to be fitted... Read MoreTT $74.00
TTS 31 60 512-1986Retractors for Motorists' Seat BeltsMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the retractor of the webbing as one of the elements of the motorist's seat belt.TT $34.00
TTS 31 60 519. 1986Seat Belt Assemblies for Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for seat belt assemblies for use by adults and larger children in motor... Read MoreTT$47.00
TTS 31 60 521-1986Webbing for Restraining Devices for Occupants of Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for webbing used for restraining devices and gives methods of test. Webbing... Read MoreTT$34.00To be reviewed shortly
TTS 40: 1995The Classification of Pesticides and Certain Toxic Agricultural ChemicalsAgriculture1995CompulsoryWithdrawnThis standard classifies plant growth regulators, pesticides, defoliants, plant desiccants,... Read MoreTT $135.00
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 411:1992Specification for Compressed Natural Gas (CNG) - Vehicular Fuel SystemsMechanical Equipment and Packaging1992CompulsoryWithdrawnApplies to the design and installation of compressed natural gas (CNG) engine fuel systems on... Read MoreTT $96.00 + VATThis standard has been revised by TTS/NFPA 52:2017.
TTS 412:1992Glossary of Terms Relating to the Steel PanTourism1992VoluntaryWithdrawnDefines terms related to the steel pan movement.TT$47.00Replaced by: TTS 412:2015
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 414. 1992Specifications for Unplasticized PVC Drain, Waste and Vent PipesMechanical Equipment and Packaging1992VoluntaryWithdrawnApplies to unplasticized polyvinyl chloride pipe for use as drainage, waste and vent systems... Read MoreTT $47.00
TTS 414-1:2007Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings - Specification - Part 1 - Heavy Duty ApplicationsMechanical Equipment and Packaging2007CompulsoryWithdrawnThis specification covers requirements and test methods for materials, dimensions and tolerances,... Read MoreTT $200.00
TTS 416:2002Steel Nails - SpecificationConstruction Products2002CompulsoryWithdrawnThis standard specifies requirements, including, dimensions, materials, finish and sampling for:... Read MoreTT $135.00Replaced by TTS 625-1:2012
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 425/1. 1993-07-27Crane Code Vocabulary: Part 1: GeneralMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms concerning the main types of crane, parameters, general concepts of component partsTT $135.00
TTS 425/2. 1993-07-27Crane Code Vocabulary: Part 2: Mobile CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms relating to the basic types of self-powered mobile cranesTT $47.00
TTS 426/1: 93Crane Code: Part 1: General Requirements - DesignMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies requirements for cranes and like lifting appliances, including design, construction and... Read MoreTT $135.00
TTS 426/11. 1993-07-27Crane Code: Part 11: SlingsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection and maintenance of slings for... Read MoreTT $150.00
TTS 426/12. 1993Crane Code: Part 12: HooksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of hooks used in... Read MoreTT $47.00
TTS 426/13. 1993Crane Code: Part 13: Monorails And Underhung CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnCovers the construction, installation, operation, inspection, and maintenance of underhung cranes... Read MoreTT $74.00
TTS 426/14. 1993Crane Code: Part 14: Handling Loads Suspended From RotorcraftMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the protection of ground personnel working directly with or in the vicinity of... Read MoreTT $47.00
TTS 426/15. 1993Crane Code: Part 15: Storage/Retrieval (S/R) Machines and Associated EquipmentMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $47.00
TTS 426/16. 1993Crane Code: Part 16: Side Boom TractorsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to manufacture, installation, inspection, testing, maintenance, and operation of side boom... Read MoreTT $47.00
TTS 426/17. 1993-07-27Crane Code: Part 17: Overhead Hoists (Underhung)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of manually... Read MoreTT $47.00
TTS 426/18. 1993-07-27Crane Code: Part 18: Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoists)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/19. 1993-07-27Crane Code: Part 19: Stacker Cranes (Top or Running Bridge Multiple Girder with Top or Under Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/2. 1993-07-27Crane Code: Part 2: General Requirements - Safe Use and MaintenanceMechanical Equipment and Packaging1993VoluntaryWithdrawnGives recommendations for the safe use of cranes. It does not cover manually operated and light... Read MoreTT $74.00
TTS 426/20. 1993-07-27Crane Code: Part 20: CablewaysMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to all load transporting, hoisting, and lowering cable-supported systems operating on and... Read MoreTT $47.00
TTS 426/21. 1993-07-27Crane Code: Part 21: Below-the-Hook Lifting DevicesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to devices other than slings for attaching loads to hoists, and include vacuum lifting... Read MoreTT $74.00
TTS 426/3. 1993-07-27Crane Code: Part 3: JacksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of general... Read MoreTT $94.00
TTS 426/4. 1993-07-27Crane Code: Part 4: Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $135.00
TTS 426/6. 1993-07-27Crane Code: Part 6: Portal, Tower, and Pillar CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of portal, tower,... Read MoreTT $94.00
TTS 426/7. 1993-07-27Crane Code: Part 7: Mobile and Locomotive CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $135.00
TTS 426/8. 1993-07-27Crane Code : Part 8: DerricksMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $94.00
TTS 426/9. 1993-07-27Crane Code: Part 9: Base Mounted Drum HoistsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, inspection, operation and maintenance of base mounted... Read MoreTT $135.00
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 428/1. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 1: Evaluation of Friction Material Characteristics - Small Sample Bench Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnEstablishes uniform laboratory procedures for securing and reporting the friction and wear... Read MoreTT $47.00
TTS 428/2. 1993Methods of Test For Road Vehicle Brake Linings and Disc Pads: Part 2: Shear Strength of Disc Pads and Brake Shoe Assemblies - Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnDescribes a method for measuring the shear strength of disc brake pad and drum brake shoe... Read MoreTT $34.00
TTS 428/3. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 3: Compressibility Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of testing and measuring the compressibility of brake liningsTT $34.00
TTS 428/4. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 4: Internal Shear Strength of Lining Material - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring the internal shear strength (stress) of brake lining materialsTT $34.00
TTS 428/5. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 5: Effects of Heat on Dimensions and Form of Disc Pads - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring disc brake pads to determine their dimensional changes in relation... Read MoreTT $34.00
TTS 428/6. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 6: Resistance to Water, Saline Solution, Oil and Brake Fluid - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for exposing samples to detrimental environments, measuring the... Read MoreTT $34.00
TTS 428/7. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 7: Seizure to Ferrous Mating Surface Due to Corrosion - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for conditioning brake linings in an environment that will promote... Read MoreTT $34.00
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 461: Part 2:2005Polyethylene Garbage Bags - Specification - Part 2 - High DensityMechanical Equipment and Packaging2005VoluntaryWithdrawnThis standard specifies requirements for high density polyethylene garbage bags which are normally... Read MoreTT $96.00 + VATReplaced by: TTS 645:2018
TTS 461:Part 1:1993Polyethylene (Polythene) Garbage Bags - Part 1: Low DensityMechanical Equipment and Packaging1993VoluntaryWithdrawnThese requirements for garbage bags for domestic and commercial use, produced from low density... Read More$74.00
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 468. 1993-10-26Household Electric RangesElectrical Products1993VoluntaryWithdrawnTT $200.00
TTS 469. 1993-10-26Household Electric Storage Tank Water HeatersConsumer Products1993CompulsoryWithdrawnTT $200.00
TTS 470:1993Electric FansElectrical Products1993VoluntaryWithdrawnTT $74.00
TTS 471. 1993-10-26Microwave Cooking Appliances Electrical Products1993CompulsoryWithdrawnTT $94.00
TTS 477. 1994Specification for Safety MatchesConsumer Products1994VoluntaryWithdrawnGives testing requirements for safety wood matches and book matches.TT $74.00
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 478. 1993-12-14General-Use Snap SwitchesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 479: 1993-12-14Portable Electric ToolsElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 481. 1993-12-14Flexible Cord and Fixture Wire Electrical Products1993CompulsoryWithdrawnTT$94.00
TTS 482. 1993-12-14Motor-Operated AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 483. 1993-12-14Household Refrigerators and FreezersElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 485. 1993-12-14Insulating TapeElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 486. 1993-12-14Christmas-Tree and Decorative Lighting OutfitsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 488. 1993-12-14Electric ToysElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 489. 1993-12-14Printed-Wiring BoardsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 492. 1993-12-14Household Electric Personal Grooming AppliancesElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 493. 1993-12-14Electric Hobby and Sports EquipmentElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 494. 1993-12-14Motor-Operated Household Food Preparing MachinesElectrical Products1993VoluntaryWithdrawnTT $94.00
TTS 495. 1993-12-14Hermetic Refrigerant Motor CompressorsElectrical Products1993CompulsoryWithdrawnTT$200.00
TTS 498. 1993-12-14Hair Clipping and Shaving AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 499. 1993-12-14Fluorescent Lighting Fixtures Electrical Products1993CompulsoryWithdrawnTT $135.00
TTS 500. 1993-12-14Incandescent Lighting FixturesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 501. 1993-12-14Motor Operated Massage and Exercise MachinesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 502. 1993-12-14Uninterruptable Power Supply EquipmentElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 506: 2005Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawn
TTS 507: 2005Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawnAvailable on request
TTS 508: 2005Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2005VoluntaryWithdrawnTT $1300.00
TTS 509/1.1. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.1 Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical PropertiesElectrical Products1994VoluntaryWithdrawnTT $94.00
TTS 509/1.2. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.2 Thermal Ageing MethodsElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/1.3. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.3 Methods for Determining the Density - Water Absorption Tests-Shrinkage TestElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/1.4. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.4 Tests at Low TemperatureElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/2.1. 1994Insulating and Sheathing Materials of Electric Cables Part 2 - Methods of Test Specific to Elastomeric Compounds - Section 2.1 Ozone Resistance Test - Hot Set Test - Mineral Oil Immersion TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/3.1. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC CompoundsElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/3.2. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC Compounds - Section 3.2 Loss of Mass TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.1. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.1 Resistance to Environmental Stress Cracking - Wrapping Test After Thermal Ageing in Air - Measurement of the Melt Flow Index - Carbon Black and/or Mineral Content Measurement in PEElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.2. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.2 Elongation at Break After Pre-Conditioning - Wrapping Test After Pre-Conditioning - Wrapping Test After ThermalElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/5.1. 1994Insulating and Sheathing Materials of Electric Cables Part 5 - Methods of Test Specific to Filling Compounds - Section 5.1 Drop-Point - Separation of Oil-Lower Temperature Brittleness - Total Acid Number - Absence of Corrosive Components - Permittivity at 2Electrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.1. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 to 5 Non-Electrical TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.2. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 To 5 Electrical TestsElectrical Products1994VoluntaryWithdrawnTT $47.00
TTS 510. 1994Specification for Seat Belt Booster CushionsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for seat belt booster cushions that are for use with a lap... Read MoreTT$94.00
TTS 511. 1995Specification for Rearward-Facing Restraining Devices for Infants for Use in Road VehiclesMechanical Equipment and Packaging1995VoluntaryWithdrawnThis standard specifies requirements for rearward-facing infant restraint systems, that are for use... Read MoreTT$74.00
TTS 512. 1994Specification for Carry Cot RestraintsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for restraining devices for separate use by child occupants of... Read MoreTT$74.00
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 520. 1995Thermal Cutoffs for Use in Electrical Appliances and ComponentsElectrical Products1995CompulsoryWithdrawnTT $74.00
TTS 521. 1995Class 2 Power UnitsElectrical Products1995CompulsoryWithdrawnTT $94.00
TTS 522. 1995Electric MotorsElectrical Products1995VoluntaryWithdrawnTT $74.00
TTS 523. 1995Fluorescent-Lamp BallastsElectrical Products1995CompulsoryWithdrawnTT $135.00
TTS 524. 1995Power SuppliesElectrical Products1995CompulsoryWithdrawnTT $200.00
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 556. 1999 A Code of Practice for Quality Management in the Restaurant ServiceTourism1999VoluntaryWithdrawnThis Code of Practice is a brief formulation of the managerial requirements necessary to ensure the... Read MoreTT $74.00
TTS 558:2001Motor Vehicles - Exhaust Emissions - SpecificationEnvironment2001VoluntaryWithdrawnSpecifies the maximum permissible limits of the key pollutants of the exhaust emissions from motor... Read MoreTT$94.00
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 571:2006Code Of Practice for Operation of Recreational Dive FacilitiesTourism2006VoluntaryWithdrawnThis code of practice specifies the minimum requirements for facilities which cater for... Read MoreTT $150.00
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 578:2001Guide to the Selection of FabricsTextiles2001VoluntaryWithdrawnGives guidelines for the selection of fabrics for varied uses such as clothing, accessories,... Read MoreTT $136.00 + VATReplaced by: TTS 578:2019
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 579:2001 Code of Practice for Tour GuidesTourism2001VoluntaryWithdrawnThis Code of Practice specifies acceptable practices to be used by tour guides. It is intended to... Read MoreTT $74.00
TTS 579:2009Tour Guides - SpecificationTourism2009VoluntaryWithdrawnThis standard specifies acceptable practices to be followed by tour guides and is intended to be... Read MoreTT $96.00 + VATReplaced by: TTS 579:2018
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2010Sodium Hypochlorite Solutions (Liquid Chlorine Bleaches) -Specification (3rd Revision)Chemistry2010CompulsoryWithdrawnThis standard specifies the requirements and test methods for all sodium hypochlorite solutions... Read MoreTT $96.00 + VATReplaced by: TTS 58:2018 and TTCS 1:2018
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 580. 2001Code of Practice for Tour OperatorsTourism2001VoluntaryWithdrawnSpecifies acceptable practices to be used by tour operators. It is intended to be used as a quality... Read MoreTT $74.00
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 584:PART 1: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Specification (Amendment)Construction Products2007CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreFree.To be replaced shortly.
TTS 584:Part 1:2002Portland Cement - Ordinary and Rapid-Hardening - SpecificationConstruction Products2002CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreTT $96.00 + VATTo be replaced shortly.
TTS 584:PART 2: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Chemical Test Methods (Amendment)Construction Products2007VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreFree.To be replaced shortly.
TTS 584:Part 2:2002Portland Cement - Ordinary and Rapid - Hardening - Chemical Test MethodsConstruction Products2002VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreTT $136.00 + VATTo be replaced shortly.
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 590:2002TLA-Raw Materials - Materials SpecificationConstruction Products2002VoluntaryWithdrawnThis specification follows the performance characteristics of Trinidad Lake Asphalt. TT $47.00
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 593:2003Modified Trinidad Lake Asphalt- SpecificationConstruction Products2003VoluntaryWithdrawnThis specification covers Modified Trinidad Lake Asphalt over the penetration grades covered in 1.2... Read MoreTT $74.00
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VATTo be Replaced by: TTS 598:2019, Cold-formed steel framing members for structural applications - Specification (1st Revision)
TTS 598:2019Cold-formed steel framing members for structural applications - Specification (1st Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies requirements for cold-formed steel framing members for use in structural... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 598:2012, Cold Formed Steel Framing Members for Structural Applications - Specification
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 6 15 200. 1985Fertilizers - Presentation of Sampling ReportsAgriculture1985VoluntaryWithdrawnSpecifies information to be given in sampling reports for consignments of fertilizersTT $34.00
TTS 6 15 201. 1985Fertilizers and Soil Conditioners - Final Samples - Practical ArrangementsAgriculture1985VoluntaryWithdrawnEstablishes practical arrangements relating to final samples of solid/fertilizers and soil... Read MoreTT $34.00
TTS 6 15 300. 1985Fertilizers - Determination of Bulk Density (Loose)Agriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the bulk density (loose) of solid fertilizers, except... Read MoreTT $34.00
TTS 6 15 301. 1985Fertilizers - Determination of Nitrate Nitrogen Content - Nitron Gravimetric MethodAgriculture1985VoluntaryWithdrawnSpecifies the nitrogen gravimetric method for the determination of the nitrogen content of... Read MoreTT $34.00
TTS 6 15 302. 1985Fertilizers - Determination of Bulk Density (Tapped)Agriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the bulk density (tapped) of solid fertilizers: the... Read MoreTT $34.00
TTS 6 15 303. 1985Fertilizers - Extraction of Water Soluble PhosphatesAgriculture1985VoluntaryWithdrawnSpecifies the method for the extraction of water soluble phosphates.TT $34.00
TTS 6 15 304. 1985Fertilizers - Determination of Potassium Content - Potassium Tetraphenylborate Gravimetric Method (Reference Method)Agriculture1985VoluntaryWithdrawnSpecifies a gravimetric method for the determination of the potassium content of test solutions of... Read MoreTT $34.00
TTS 6 15 305. 1985Fertilizers - Determination of Acid Soluble Potassium Content - Preparation of Test SolutionAgriculture1985VoluntaryWithdrawnSpecifies the reference method for the preparation of test solutions for fertilizers for the... Read MoreTT $34.00
TTS 6 15 306. 1985Fertilizers - Determination of Ammoniacal Nitrogen Content in the Presence of other Substances which Release Ammonia when TreatedAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the ammoniacal nitrogen content of fertilizers... Read MoreTT $34.00
TTS 6 15 400. 1985Fertilizers and Soil Conditioners - ClassificationAgriculture1985VoluntaryWithdrawnEstablishes a classification system for fertilizers and soil conditioners.TT $34.00
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 6 20 400. 1983Common Names for Pesticides and other AgrochemicalsAgriculture1983VoluntaryWithdrawnLists common names for certain pest control chemicals and plant growth regulators of international... Read MoreTT $135.00
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 6 25 201. 1985Animal Feeding Stuffs - Preparation of Test SamplesAgriculture1985VoluntaryWithdrawnSpecifies methods for preparing test samples of animal feeding stuffsTT $34.00
TTS 6 25 300. 1985Agricultural Food Products - General Directions for the Determination of Nitrogen by the Kjeldahl MethodAgriculture1985VoluntaryWithdrawnGives general directions for the apparatus and procedures used for the determination of nitrogen in... Read MoreTT $34.00
TTS 6 25 301. 1985Animal Feeding Stuffs - Determination of Nitrogen Content and Calculation of Crude Protein ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the nitrogen content of animal feeding stuffs by the... Read MoreTT $34.00
TTS 6 25 302. 1985Animal Feeding Stuffs - Determination of Total Phosphorus Content - Spectrophotometric MethodAgriculture1985VoluntaryWithdrawnGives a spectrophotometric method for the determination of the total phosphorus content of animal... Read MoreTT $34.00
TTS 6 25 303. 1985Animals Feeding Stuffs - Determination of Crude Ash ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of crude ash in animal feeding stuffsTT $34.00
TTS 6 25 304. 1985Animal Feeding Stuffs - Determination of Ash Insoluble in Hydrochloric AcidAgriculture1985VoluntaryWithdrawnSpecifies two procedures for the determination of the ash of animal feeding stuffs which is... Read MoreTT $34.00
TTS 6 25 305. 1985Animal Feeding Stuffs - Determination of Water Soluble Chlorides ContentAgriculture1985VoluntaryWithdrawnGives methods to determine the water soluble chlorides content (sodium chloride) of animal feeding... Read MoreTT $34.00
TTS 6 25 306. 1985Animal Feeding Stuffs Determination of Calcium Content - Atomic Absorption Spectrometric MethodAgriculture1985VoluntaryWithdrawnSpecifies an atomic absorption spectrometric method for the determination of the calcium content of... Read MoreTT $34.00
TTS 6 25 307. 1985Animal Feeding Stuffs - Determination of Aflatoxin B1 ContentAgriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the aflatoxin B content of animal feeding stuffs.TT $34.00
TTS 6 25 308. 1985Animal Feeding Stuffs - Determination of Moisture ContentAgriculture1985VoluntaryWithdrawnSpecifies a method to determine the moisture content of animal feeding stuffsTT $34.00
TTS 6 25 309. 1985Agricultural Food Products - Determination of Crude Fibre Content, Modified Scharrer MethodAgriculture1985VoluntaryWithdrawnSpecifies a conventional method for the determination of the crude fibre content of agricultural... Read MoreTT $34.00
TTS 6 25 310. 1985Animal Feeding Stuffs - Determination of Diethyl Ether ExtractAgriculture1985VoluntaryWithdrawnSpecifies a method, comprising two procedures, according to the nature of the sample, for the... Read MoreTT $34.00
TTS 6 25 311. 1985Animal Feeding Stuffs - Determination of Available LysineAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the available lysine in animal feeding stuffs... Read MoreTT $34.00
TTS 6 25 500. 1977Specifications for Poultry FeedAgriculture1977VoluntaryWithdrawnGives the technical requirements for poultry feeds whether these be in the form of pellets,... Read MoreTT $74.00
TTS 6 25 501. 1984Specification for Pig FeedAgriculture1984VoluntaryWithdrawnGives requirements for feeds for pigs (sus scrofa) whether these be in the form of pellets,... Read MoreTT $74.00
TTS 6 25 503. 1979Specification for Wheat MiddlingsAgriculture1979VoluntaryWithdrawnSpecifies the required composition (crude protein, crude fat and crude fibre) and labelling... Read MoreTT $34.00
TTS 601:2007Plastic Chairs - Performance RequirementsMechanical Equipment and Packaging2007CompulsoryWithdrawnThese requirements establish nationally recognized performance requirements for Class A... Read MoreTT $200.00
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VATTo be Replaced by: TTS 69:2019, Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)
TTS 69:2019Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies minimum requirements for metallic-coated steel sheets profiled for roofing... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 69:2012, Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)
TTS 76: Part 13:2010 Requirements for Labelling - Part 13: Labelling of Electrical Appliances (2nd Revision)Electrical Products2010CompulsoryWithdrawnThis National Standard applies to the labelling requirements for all electrical appliances that are... Read MoreTT $96.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS 76-3: 1996Requirements for Labelling - Pt 3 - Labelling of GarmentsTextiles1996CompulsoryWithdrawnPrescribes the requirements for labelling of all articles (usually of textiles) designed to cover,... Read More TT $47.00
TTS 76-8:1995Requirements for Labelling - Part 8 Labelling of Retail Packages of PesticidesAgriculture1995VoluntaryWithdrawnThis standard specifies the information to be included on labels of pesticide packages as well as... Read MoreTT $94.00
TTS 76-9: 1998Requirements for Labelling - Labelling of FootwearTextiles1998CompulsoryWithdrawnApplies to the labelling of all footwear whether new, used or seconds, that are offered for sale in... Read More TT $47.00
TTS 94-1:2010Requirements for Advertising - Part 1: General PrinciplesConsumer Products2010VoluntaryWithdrawnThis standard sets out general requirements for the contents of advertising that are published,... Read MoreTT $96.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5467: 2008Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/BS 6004: 2008Electric Cables - PVC Insulated, Non Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2008CompulsoryWithdrawnSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestBeing replaced by TTS 639:2014.
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7889:2007Specification for 600/1000 V Single-Core Unarmoured Electric Cables Having Thermosetting InsulationElectrical Products2007VoluntaryWithdrawnTT $740.00
TTS/BS 7889:2008Electric Cables - Thermosetting Insulated, Unarmoured Cables for a Voltage of 600/1000 VElectrical Products2008CompulsoryWithdrawnSpecifies requirements for construction and describes methods of test for unarmoured single - core... Read MoreTT $740.00
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/IEC 60968:2008Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2008CompulsoryWithdrawnThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreTT $487.00Being replaced by TTS/IEC 60968:2014
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/IEC CISPR 11:2007Industrial, Scientific And Medical (ISM) - Radio Frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThe limits in this International Standard are designed to provide protection for broadcast... Read MoreTT $1500.00
TTS/IEC CISPR 12:2007Vehicles, Boats and Internal Combustion Engines - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Off-Board ReceiversTelecommunications2007VoluntaryWithdrawnThe limits in this International Standard are designed to provide protection for broadcast... Read MoreTT $1500.00
TTS/IEC CISPR 13:2007Sound and Television Broadcast Receivers and Associated Equipment - Radio Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnApplies to the generation of electromagnetic energy from sound and television receivers for the... Read MoreTT $1500.00
TTS/IEC CISPR 14-1:2007Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: EmissionsTelecommunications2007VoluntaryWithdrawnThis standard applies to the conduction and the radiation of radio-frequency disturbances from... Read MoreTT $3740.00
TTS/IEC CISPR 14-2:2007Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 2: Immunity - Product Family StandardTelecommunications2007VoluntaryWithdrawnThis standard deals with the electromagnetic immunity of appliances and similar apparatus for... Read MoreTT $250.00
TTS/IEC CISPR 15:2007Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar EquipmentTelecommunications2007VoluntaryWithdrawnThis standard applies to emission (radiated and conducted) of radiofrequency disturbances from: -... Read MoreTT $1500.00
TTS/IEC CISPR 18-1:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 1: Description of PhenomenaTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $1000.00
TTS/IEC CISPR 18-2:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 2: Methods of Measurement and Procedure for Determining LimitsTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $990.00
TTS/IEC CISPR 18-3:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 3: Code of Practice for Minimizing the Generation of Radio NoiseTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $497.00
TTS/IEC CISPR 20:2007Sound and Television Broadcast Receivers and Associated Equipment - Immunity Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis standard for immunity requirements applies to television broadcast receivers, sound broadcast... Read MoreTT $1836.00
TTS/IEC CISPR 22:2007Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis International Standards applies to ITE as defined in 3.1. Procedures are given for the... Read MoreTT $2094.00
TTS/IEC CISPR 24:2007Information Technology Equipment - Immunity Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnApplies to information technology equipment (ITE) as defined in CISPR 22. Procedures are defined... Read MoreTT $410.00
TTS/IEC CISPR 25:2007Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles, Boats and on Devices - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis International Standard contains limits and procedures for the measurement of radio... Read MoreTT $1653.00
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 1000: 2009SI Units and Recommendations for the use of their Multiples and of Certain Other Units (Including Amendment 1)Metrology2009VoluntaryWithdrawnDescribes the International System of Units ( in clauses 3, 4 and 6); recommends selected decimal... Read MoreTT $625.00
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 14001:2007Environmental Management Systems - Requirements with Guidance for UseEnvironment2007VoluntaryWithdrawnSpecifies requirements for an environmental management system to enable an organization to develop... Read MoreTT $850.00
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3205:2009Preferred Test TemperaturesMetrology2009VoluntaryWithdrawnThe aim is the rationalize, harmonize and simplify the choice of temperatures in the future. In... Read MoreTT $200.00
TTS/ISO 3394:2008Dimensions of Rigid Rectangular Packages - Transport PackagesMechanical Equipment and Packaging2008VoluntaryWithdrawnSets forth a series of dimensions for rigid rectangular transport packages based on the standard... Read MoreTT $250.00
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 3676:2008Packaging - Unit Load Sizes - DimensionsMechanical Equipment and Packaging2008VoluntaryWithdrawnBased on the concept of a modular system and specifies the plan dimensions for unit loads suitable... Read MoreTT $200.00
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 4178:2008Complete, Filled Transport Packages - Distribution Trials - Information to be RecordedMechanical Equipment and Packaging2008VoluntaryWithdrawnSpecifies the information to be recorded when carrying out distribution trials involving complete,... Read MoreTT $200.00
TTS/ISO 4180-1:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 1: General PrinciplesMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $560.00
TTS/ISO 4180-2:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 2: Quantitative DataMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $559.00
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 554:2009Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology2009VoluntaryWithdrawnLays down three standard atmospheres for conditioning and/or testing which are not very different... Read MoreTT $200.00
TTS/ISO 558:2009 Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology2009VoluntaryWithdrawnDefines three types of standard atmosphereTT $200.00
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6590:PART 1:2009Packaging - Sacks - Vocabulary and Types - Part 1: Paper SacksMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 6590 defines terms commonly used in paper sack manufacture. It refers to single... Read MoreTT $587.00
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 780:2009Packaging - Pictorial Marking for Handling of GoodsMechanical Equipment and Packaging2009VoluntaryWithdrawnSpecifies a set of symbols conventionally used for marking of transport packages in their physical... Read MoreTT $420.00
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO 9000:2008Quality Management Systems - Fundamentals and VocabularyQuality2008VoluntaryWithdrawnDescribes fundamentals of quality management systems, which form the subject of the ISO family, and... Read MoreAvailable on requestStatus under review
TTS/ISO 9001:2009Quality Management Systems - RequirementsQuality2009VoluntaryWithdrawnSpecifies requirements for a quality management system when an organization (a) needs to... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO 90-2:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines general use containers, types of container, cross-sections,... Read MoreTT $640.00
TTS/ISO 90-3:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines the diameters, apertures, constructions, shapes and capacities of... Read MoreTT $457.00
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC 27001:2009Information Technology- Security Techniques - Information Security Management Systems - RequirementsTelecommunications2009VoluntaryWithdrawnCovers all types of organizations (e.g. commercial enterprises, government agencies, non-profit... Read MoreAvailable on request
TTS/ISO/IEC 27002:2009Information Technology- Security Techniques - Code of Practice for Information Security ManagementTelecommunications2009VoluntaryWithdrawnEstablishes guidelines and general principles for initiating, implementing maintaining, and... Read MoreTT $1300.00
TTS/ISO/IEC 27005:2009Information Technology - Security Techniques - Information Security Risk ManagementTelecommunications2009VoluntaryWithdrawnProvides guidelines for information security risk management. This standard supports the general... Read MoreTT $990.00
TTS/ISO/IEC 27006:2009Information Technology - Security Techniques - Requirements for Bodies Providing Audit and Certification of Information Security Management SystemsTelecommunications2009VoluntaryWithdrawnISO/IEC 27006:2007 specifies requirements and provides guidance for bodies providing audit and... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/ISO/IEC GUIDE 43-1:2008Proficiency Testing by Interlaboratory Comparisons - Part 1: Development and Operation of Proficiency Testing SchemesQuality2008VoluntaryWithdrawnWhile there are a number of uses of interlaboratory comparisons, and variations in their design and... Read MoreTT $455.00
TTS/ISO/IEC GUIDE 43-2:2008Proficiency Testing by Interlaboratory Comparisons - Part 2: Selection and Use of Proficiency Testing Schemes by Laboratory Accreditation BodiesQuality2008VoluntaryWithdrawnThe objectives of this part of ISO/IEC Guide 43 are: a) to establish principles for the selection... Read MoreTT $200.00
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
TTS/UL 489:2008Molded-Case Circuit Breakers, Molded Case Switches and Circuit-Breaker EnclosuresElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
2019
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 598:2019Cold-formed steel framing members for structural applications - Specification (1st Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies requirements for cold-formed steel framing members for use in structural... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 598:2012, Cold Formed Steel Framing Members for Structural Applications - Specification
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS 69:2019Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies minimum requirements for metallic-coated steel sheets profiled for roofing... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 69:2012, Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
2018
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
2017
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
2016
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
2015
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
2014
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
2013
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
2012
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VATTo be Replaced by: TTS 598:2019, Cold-formed steel framing members for structural applications - Specification (1st Revision)
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VATTo be Replaced by: TTS 69:2019, Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
2011
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
2010
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 58:2010Sodium Hypochlorite Solutions (Liquid Chlorine Bleaches) -Specification (3rd Revision)Chemistry2010CompulsoryWithdrawnThis standard specifies the requirements and test methods for all sodium hypochlorite solutions... Read MoreTT $96.00 + VATReplaced by: TTS 58:2018 and TTCS 1:2018
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 76: Part 13:2010 Requirements for Labelling - Part 13: Labelling of Electrical Appliances (2nd Revision)Electrical Products2010CompulsoryWithdrawnThis National Standard applies to the labelling requirements for all electrical appliances that are... Read MoreTT $96.00 + VAT
TTS 94-1:2010Requirements for Advertising - Part 1: General PrinciplesConsumer Products2010VoluntaryWithdrawnThis standard sets out general requirements for the contents of advertising that are published,... Read MoreTT $96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
2009
TTS 579:2009Tour Guides - SpecificationTourism2009VoluntaryWithdrawnThis standard specifies acceptable practices to be followed by tour guides and is intended to be... Read MoreTT $96.00 + VATReplaced by: TTS 579:2018
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/ISO 1000: 2009SI Units and Recommendations for the use of their Multiples and of Certain Other Units (Including Amendment 1)Metrology2009VoluntaryWithdrawnDescribes the International System of Units ( in clauses 3, 4 and 6); recommends selected decimal... Read MoreTT $625.00
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 3205:2009Preferred Test TemperaturesMetrology2009VoluntaryWithdrawnThe aim is the rationalize, harmonize and simplify the choice of temperatures in the future. In... Read MoreTT $200.00
TTS/ISO 554:2009Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology2009VoluntaryWithdrawnLays down three standard atmospheres for conditioning and/or testing which are not very different... Read MoreTT $200.00
TTS/ISO 558:2009 Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology2009VoluntaryWithdrawnDefines three types of standard atmosphereTT $200.00
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6590:PART 1:2009Packaging - Sacks - Vocabulary and Types - Part 1: Paper SacksMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 6590 defines terms commonly used in paper sack manufacture. It refers to single... Read MoreTT $587.00
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 780:2009Packaging - Pictorial Marking for Handling of GoodsMechanical Equipment and Packaging2009VoluntaryWithdrawnSpecifies a set of symbols conventionally used for marking of transport packages in their physical... Read MoreTT $420.00
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 9001:2009Quality Management Systems - RequirementsQuality2009VoluntaryWithdrawnSpecifies requirements for a quality management system when an organization (a) needs to... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO 90-2:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines general use containers, types of container, cross-sections,... Read MoreTT $640.00
TTS/ISO 90-3:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines the diameters, apertures, constructions, shapes and capacities of... Read MoreTT $457.00
TTS/ISO/IEC 27001:2009Information Technology- Security Techniques - Information Security Management Systems - RequirementsTelecommunications2009VoluntaryWithdrawnCovers all types of organizations (e.g. commercial enterprises, government agencies, non-profit... Read MoreAvailable on request
TTS/ISO/IEC 27002:2009Information Technology- Security Techniques - Code of Practice for Information Security ManagementTelecommunications2009VoluntaryWithdrawnEstablishes guidelines and general principles for initiating, implementing maintaining, and... Read MoreTT $1300.00
TTS/ISO/IEC 27005:2009Information Technology - Security Techniques - Information Security Risk ManagementTelecommunications2009VoluntaryWithdrawnProvides guidelines for information security risk management. This standard supports the general... Read MoreTT $990.00
TTS/ISO/IEC 27006:2009Information Technology - Security Techniques - Requirements for Bodies Providing Audit and Certification of Information Security Management SystemsTelecommunications2009VoluntaryWithdrawnISO/IEC 27006:2007 specifies requirements and provides guidance for bodies providing audit and... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
2008
TTS 22:PART 2:2008Requirements for Tourist Accommodation - Part 2: Bed and Breakfast and Self Catering FacilitiesTourism2008VoluntaryWithdrawnThis Trinidad and Tobago standard provides the minimum requirements for Bed and Breakfast and... Read MoreTT $200.00
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 5467: 2008Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/BS 6004: 2008Electric Cables - PVC Insulated, Non Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2008CompulsoryWithdrawnSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestBeing replaced by TTS 639:2014.
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7889:2008Electric Cables - Thermosetting Insulated, Unarmoured Cables for a Voltage of 600/1000 VElectrical Products2008CompulsoryWithdrawnSpecifies requirements for construction and describes methods of test for unarmoured single - core... Read MoreTT $740.00
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60968:2008Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2008CompulsoryWithdrawnThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreTT $487.00Being replaced by TTS/IEC 60968:2014
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/IEC CISPR 18-1:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 1: Description of PhenomenaTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $1000.00
TTS/IEC CISPR 18-2:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 2: Methods of Measurement and Procedure for Determining LimitsTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $990.00
TTS/IEC CISPR 18-3:2008Radio Interference Characteristics of Overhead Power Lines and High Voltage Equipment - Part 3: Code of Practice for Minimizing the Generation of Radio NoiseTelecommunications2008VoluntaryWithdrawnApplies to radio noise from overhead power lines and high-voltage equipment which may cause... Read MoreTT $497.00
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3394:2008Dimensions of Rigid Rectangular Packages - Transport PackagesMechanical Equipment and Packaging2008VoluntaryWithdrawnSets forth a series of dimensions for rigid rectangular transport packages based on the standard... Read MoreTT $250.00
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3676:2008Packaging - Unit Load Sizes - DimensionsMechanical Equipment and Packaging2008VoluntaryWithdrawnBased on the concept of a modular system and specifies the plan dimensions for unit loads suitable... Read MoreTT $200.00
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 4178:2008Complete, Filled Transport Packages - Distribution Trials - Information to be RecordedMechanical Equipment and Packaging2008VoluntaryWithdrawnSpecifies the information to be recorded when carrying out distribution trials involving complete,... Read MoreTT $200.00
TTS/ISO 4180-1:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 1: General PrinciplesMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $560.00
TTS/ISO 4180-2:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 2: Quantitative DataMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $559.00
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO 9000:2008Quality Management Systems - Fundamentals and VocabularyQuality2008VoluntaryWithdrawnDescribes fundamentals of quality management systems, which form the subject of the ISO family, and... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 43-1:2008Proficiency Testing by Interlaboratory Comparisons - Part 1: Development and Operation of Proficiency Testing SchemesQuality2008VoluntaryWithdrawnWhile there are a number of uses of interlaboratory comparisons, and variations in their design and... Read MoreTT $455.00
TTS/ISO/IEC GUIDE 43-2:2008Proficiency Testing by Interlaboratory Comparisons - Part 2: Selection and Use of Proficiency Testing Schemes by Laboratory Accreditation BodiesQuality2008VoluntaryWithdrawnThe objectives of this part of ISO/IEC Guide 43 are: a) to establish principles for the selection... Read MoreTT $200.00
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 489:2008Molded-Case Circuit Breakers, Molded Case Switches and Circuit-Breaker EnclosuresElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
2007
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 414-1:2007Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings - Specification - Part 1 - Heavy Duty ApplicationsMechanical Equipment and Packaging2007CompulsoryWithdrawnThis specification covers requirements and test methods for materials, dimensions and tolerances,... Read MoreTT $200.00
TTS 584:PART 1: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Specification (Amendment)Construction Products2007CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreFree.To be replaced shortly.
TTS 584:PART 2: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Chemical Test Methods (Amendment)Construction Products2007VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreFree.To be replaced shortly.
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 601:2007Plastic Chairs - Performance RequirementsMechanical Equipment and Packaging2007CompulsoryWithdrawnThese requirements establish nationally recognized performance requirements for Class A... Read MoreTT $200.00
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 7889:2007Specification for 600/1000 V Single-Core Unarmoured Electric Cables Having Thermosetting InsulationElectrical Products2007VoluntaryWithdrawnTT $740.00
TTS/IEC CISPR 11:2007Industrial, Scientific And Medical (ISM) - Radio Frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThe limits in this International Standard are designed to provide protection for broadcast... Read MoreTT $1500.00
TTS/IEC CISPR 12:2007Vehicles, Boats and Internal Combustion Engines - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Off-Board ReceiversTelecommunications2007VoluntaryWithdrawnThe limits in this International Standard are designed to provide protection for broadcast... Read MoreTT $1500.00
TTS/IEC CISPR 13:2007Sound and Television Broadcast Receivers and Associated Equipment - Radio Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnApplies to the generation of electromagnetic energy from sound and television receivers for the... Read MoreTT $1500.00
TTS/IEC CISPR 14-1:2007Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: EmissionsTelecommunications2007VoluntaryWithdrawnThis standard applies to the conduction and the radiation of radio-frequency disturbances from... Read MoreTT $3740.00
TTS/IEC CISPR 14-2:2007Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 2: Immunity - Product Family StandardTelecommunications2007VoluntaryWithdrawnThis standard deals with the electromagnetic immunity of appliances and similar apparatus for... Read MoreTT $250.00
TTS/IEC CISPR 15:2007Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar EquipmentTelecommunications2007VoluntaryWithdrawnThis standard applies to emission (radiated and conducted) of radiofrequency disturbances from: -... Read MoreTT $1500.00
TTS/IEC CISPR 20:2007Sound and Television Broadcast Receivers and Associated Equipment - Immunity Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis standard for immunity requirements applies to television broadcast receivers, sound broadcast... Read MoreTT $1836.00
TTS/IEC CISPR 22:2007Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis International Standards applies to ITE as defined in 3.1. Procedures are given for the... Read MoreTT $2094.00
TTS/IEC CISPR 24:2007Information Technology Equipment - Immunity Characteristics - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnApplies to information technology equipment (ITE) as defined in CISPR 22. Procedures are defined... Read MoreTT $410.00
TTS/IEC CISPR 25:2007Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles, Boats and on Devices - Limits and Methods of MeasurementTelecommunications2007VoluntaryWithdrawnThis International Standard contains limits and procedures for the measurement of radio... Read MoreTT $1653.00
TTS/ISO 14001:2007Environmental Management Systems - Requirements with Guidance for UseEnvironment2007VoluntaryWithdrawnSpecifies requirements for an environmental management system to enable an organization to develop... Read MoreTT $850.00
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
2006
TTS 22:PART 1:2006Requirements for Tourist Accommodation Part 1: Hotels and GuesthousesTourism2006VoluntaryWithdrawnSpecifies the minimum requirements for hotels and guesthouses operating in Trinidad and Tobago.... Read MoreTT $135.00
TTS 571:2006Code Of Practice for Operation of Recreational Dive FacilitiesTourism2006VoluntaryWithdrawnThis code of practice specifies the minimum requirements for facilities which cater for... Read MoreTT $150.00
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
2005
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 179:2005Lead-Acid Starter Batteries - Specification (2nd Revision)Electrical Products2005CompulsoryWithdrawnThis standard specifies requirements and test methods for vented and valve regulated lead-acid... Read MoreTT $300.00Replaced by TTS/IEC 60095-1:2014
TTS 296: 2005Electric Cables - PVC Insulated, Non-Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2005VoluntaryWithdrawnTT $1200.00
TTS 461: Part 2:2005Polyethylene Garbage Bags - Specification - Part 2 - High DensityMechanical Equipment and Packaging2005VoluntaryWithdrawnThis standard specifies requirements for high density polyethylene garbage bags which are normally... Read MoreTT $96.00 + VATReplaced by: TTS 645:2018
TTS 506: 2005Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawn
TTS 507: 2005Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawnAvailable on request
TTS 508: 2005Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2005VoluntaryWithdrawnTT $1300.00
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
2003
TTS 593:2003Modified Trinidad Lake Asphalt- SpecificationConstruction Products2003VoluntaryWithdrawnThis specification covers Modified Trinidad Lake Asphalt over the penetration grades covered in 1.2... Read MoreTT $74.00
2002
TTS 171:PART 1:2002Trinidad and Tobago Electrical Wiring Code - Part 1 - Low Voltage Installations (Including Amendment 1 (2007))Electrical Codes2002VoluntaryWithdrawnLays down requirements for the installation, inspection, testing and maintenance of electrical... Read More$150.00Includes Amendment 1 (2007) TTS 171:Part 1:2002 is under revision.
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 416:2002Steel Nails - SpecificationConstruction Products2002CompulsoryWithdrawnThis standard specifies requirements, including, dimensions, materials, finish and sampling for:... Read MoreTT $135.00Replaced by TTS 625-1:2012
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 584:Part 1:2002Portland Cement - Ordinary and Rapid-Hardening - SpecificationConstruction Products2002CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreTT $96.00 + VATTo be replaced shortly.
TTS 584:Part 2:2002Portland Cement - Ordinary and Rapid - Hardening - Chemical Test MethodsConstruction Products2002VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreTT $136.00 + VATTo be replaced shortly.
TTS 590:2002TLA-Raw Materials - Materials SpecificationConstruction Products2002VoluntaryWithdrawnThis specification follows the performance characteristics of Trinidad Lake Asphalt. TT $47.00
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
2001
TTS 558:2001Motor Vehicles - Exhaust Emissions - SpecificationEnvironment2001VoluntaryWithdrawnSpecifies the maximum permissible limits of the key pollutants of the exhaust emissions from motor... Read MoreTT$94.00
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 578:2001Guide to the Selection of FabricsTextiles2001VoluntaryWithdrawnGives guidelines for the selection of fabrics for varied uses such as clothing, accessories,... Read MoreTT $136.00 + VATReplaced by: TTS 578:2019
TTS 579:2001 Code of Practice for Tour GuidesTourism2001VoluntaryWithdrawnThis Code of Practice specifies acceptable practices to be used by tour guides. It is intended to... Read MoreTT $74.00
TTS 580. 2001Code of Practice for Tour OperatorsTourism2001VoluntaryWithdrawnSpecifies acceptable practices to be used by tour operators. It is intended to be used as a quality... Read MoreTT $74.00
1999
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 556. 1999 A Code of Practice for Quality Management in the Restaurant ServiceTourism1999VoluntaryWithdrawnThis Code of Practice is a brief formulation of the managerial requirements necessary to ensure the... Read MoreTT $74.00
1998
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 76-9: 1998Requirements for Labelling - Labelling of FootwearTextiles1998CompulsoryWithdrawnApplies to the labelling of all footwear whether new, used or seconds, that are offered for sale in... Read More TT $47.00
1997
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
1996
TTS 76-3: 1996Requirements for Labelling - Pt 3 - Labelling of GarmentsTextiles1996CompulsoryWithdrawnPrescribes the requirements for labelling of all articles (usually of textiles) designed to cover,... Read More TT $47.00
1995
TTS 40: 1995The Classification of Pesticides and Certain Toxic Agricultural ChemicalsAgriculture1995CompulsoryWithdrawnThis standard classifies plant growth regulators, pesticides, defoliants, plant desiccants,... Read MoreTT $135.00
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 511. 1995Specification for Rearward-Facing Restraining Devices for Infants for Use in Road VehiclesMechanical Equipment and Packaging1995VoluntaryWithdrawnThis standard specifies requirements for rearward-facing infant restraint systems, that are for use... Read MoreTT$74.00
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 520. 1995Thermal Cutoffs for Use in Electrical Appliances and ComponentsElectrical Products1995CompulsoryWithdrawnTT $74.00
TTS 521. 1995Class 2 Power UnitsElectrical Products1995CompulsoryWithdrawnTT $94.00
TTS 522. 1995Electric MotorsElectrical Products1995VoluntaryWithdrawnTT $74.00
TTS 523. 1995Fluorescent-Lamp BallastsElectrical Products1995CompulsoryWithdrawnTT $135.00
TTS 524. 1995Power SuppliesElectrical Products1995CompulsoryWithdrawnTT $200.00
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 76-8:1995Requirements for Labelling - Part 8 Labelling of Retail Packages of PesticidesAgriculture1995VoluntaryWithdrawnThis standard specifies the information to be included on labels of pesticide packages as well as... Read MoreTT $94.00
1994
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 477. 1994Specification for Safety MatchesConsumer Products1994VoluntaryWithdrawnGives testing requirements for safety wood matches and book matches.TT $74.00
TTS 509/1.1. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.1 Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical PropertiesElectrical Products1994VoluntaryWithdrawnTT $94.00
TTS 509/1.2. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.2 Thermal Ageing MethodsElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/1.3. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.3 Methods for Determining the Density - Water Absorption Tests-Shrinkage TestElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/1.4. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.4 Tests at Low TemperatureElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/2.1. 1994Insulating and Sheathing Materials of Electric Cables Part 2 - Methods of Test Specific to Elastomeric Compounds - Section 2.1 Ozone Resistance Test - Hot Set Test - Mineral Oil Immersion TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/3.1. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC CompoundsElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/3.2. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC Compounds - Section 3.2 Loss of Mass TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.1. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.1 Resistance to Environmental Stress Cracking - Wrapping Test After Thermal Ageing in Air - Measurement of the Melt Flow Index - Carbon Black and/or Mineral Content Measurement in PEElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.2. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.2 Elongation at Break After Pre-Conditioning - Wrapping Test After Pre-Conditioning - Wrapping Test After ThermalElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/5.1. 1994Insulating and Sheathing Materials of Electric Cables Part 5 - Methods of Test Specific to Filling Compounds - Section 5.1 Drop-Point - Separation of Oil-Lower Temperature Brittleness - Total Acid Number - Absence of Corrosive Components - Permittivity at 2Electrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.1. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 to 5 Non-Electrical TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.2. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 To 5 Electrical TestsElectrical Products1994VoluntaryWithdrawnTT $47.00
TTS 510. 1994Specification for Seat Belt Booster CushionsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for seat belt booster cushions that are for use with a lap... Read MoreTT$94.00
TTS 512. 1994Specification for Carry Cot RestraintsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for restraining devices for separate use by child occupants of... Read MoreTT$74.00
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
1993
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 425/1. 1993-07-27Crane Code Vocabulary: Part 1: GeneralMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms concerning the main types of crane, parameters, general concepts of component partsTT $135.00
TTS 425/2. 1993-07-27Crane Code Vocabulary: Part 2: Mobile CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms relating to the basic types of self-powered mobile cranesTT $47.00
TTS 426/1: 93Crane Code: Part 1: General Requirements - DesignMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies requirements for cranes and like lifting appliances, including design, construction and... Read MoreTT $135.00
TTS 426/11. 1993-07-27Crane Code: Part 11: SlingsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection and maintenance of slings for... Read MoreTT $150.00
TTS 426/12. 1993Crane Code: Part 12: HooksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of hooks used in... Read MoreTT $47.00
TTS 426/13. 1993Crane Code: Part 13: Monorails And Underhung CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnCovers the construction, installation, operation, inspection, and maintenance of underhung cranes... Read MoreTT $74.00
TTS 426/14. 1993Crane Code: Part 14: Handling Loads Suspended From RotorcraftMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the protection of ground personnel working directly with or in the vicinity of... Read MoreTT $47.00
TTS 426/15. 1993Crane Code: Part 15: Storage/Retrieval (S/R) Machines and Associated EquipmentMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $47.00
TTS 426/16. 1993Crane Code: Part 16: Side Boom TractorsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to manufacture, installation, inspection, testing, maintenance, and operation of side boom... Read MoreTT $47.00
TTS 426/17. 1993-07-27Crane Code: Part 17: Overhead Hoists (Underhung)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of manually... Read MoreTT $47.00
TTS 426/18. 1993-07-27Crane Code: Part 18: Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoists)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/19. 1993-07-27Crane Code: Part 19: Stacker Cranes (Top or Running Bridge Multiple Girder with Top or Under Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/2. 1993-07-27Crane Code: Part 2: General Requirements - Safe Use and MaintenanceMechanical Equipment and Packaging1993VoluntaryWithdrawnGives recommendations for the safe use of cranes. It does not cover manually operated and light... Read MoreTT $74.00
TTS 426/20. 1993-07-27Crane Code: Part 20: CablewaysMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to all load transporting, hoisting, and lowering cable-supported systems operating on and... Read MoreTT $47.00
TTS 426/21. 1993-07-27Crane Code: Part 21: Below-the-Hook Lifting DevicesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to devices other than slings for attaching loads to hoists, and include vacuum lifting... Read MoreTT $74.00
TTS 426/3. 1993-07-27Crane Code: Part 3: JacksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of general... Read MoreTT $94.00
TTS 426/4. 1993-07-27Crane Code: Part 4: Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $135.00
TTS 426/6. 1993-07-27Crane Code: Part 6: Portal, Tower, and Pillar CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of portal, tower,... Read MoreTT $94.00
TTS 426/7. 1993-07-27Crane Code: Part 7: Mobile and Locomotive CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $135.00
TTS 426/8. 1993-07-27Crane Code : Part 8: DerricksMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $94.00
TTS 426/9. 1993-07-27Crane Code: Part 9: Base Mounted Drum HoistsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, inspection, operation and maintenance of base mounted... Read MoreTT $135.00
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 428/1. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 1: Evaluation of Friction Material Characteristics - Small Sample Bench Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnEstablishes uniform laboratory procedures for securing and reporting the friction and wear... Read MoreTT $47.00
TTS 428/2. 1993Methods of Test For Road Vehicle Brake Linings and Disc Pads: Part 2: Shear Strength of Disc Pads and Brake Shoe Assemblies - Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnDescribes a method for measuring the shear strength of disc brake pad and drum brake shoe... Read MoreTT $34.00
TTS 428/3. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 3: Compressibility Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of testing and measuring the compressibility of brake liningsTT $34.00
TTS 428/4. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 4: Internal Shear Strength of Lining Material - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring the internal shear strength (stress) of brake lining materialsTT $34.00
TTS 428/5. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 5: Effects of Heat on Dimensions and Form of Disc Pads - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring disc brake pads to determine their dimensional changes in relation... Read MoreTT $34.00
TTS 428/6. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 6: Resistance to Water, Saline Solution, Oil and Brake Fluid - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for exposing samples to detrimental environments, measuring the... Read MoreTT $34.00
TTS 428/7. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 7: Seizure to Ferrous Mating Surface Due to Corrosion - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for conditioning brake linings in an environment that will promote... Read MoreTT $34.00
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 461:Part 1:1993Polyethylene (Polythene) Garbage Bags - Part 1: Low DensityMechanical Equipment and Packaging1993VoluntaryWithdrawnThese requirements for garbage bags for domestic and commercial use, produced from low density... Read More$74.00
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 468. 1993-10-26Household Electric RangesElectrical Products1993VoluntaryWithdrawnTT $200.00
TTS 469. 1993-10-26Household Electric Storage Tank Water HeatersConsumer Products1993CompulsoryWithdrawnTT $200.00
TTS 470:1993Electric FansElectrical Products1993VoluntaryWithdrawnTT $74.00
TTS 471. 1993-10-26Microwave Cooking Appliances Electrical Products1993CompulsoryWithdrawnTT $94.00
TTS 478. 1993-12-14General-Use Snap SwitchesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 479: 1993-12-14Portable Electric ToolsElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 481. 1993-12-14Flexible Cord and Fixture Wire Electrical Products1993CompulsoryWithdrawnTT$94.00
TTS 482. 1993-12-14Motor-Operated AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 483. 1993-12-14Household Refrigerators and FreezersElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 485. 1993-12-14Insulating TapeElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 486. 1993-12-14Christmas-Tree and Decorative Lighting OutfitsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 488. 1993-12-14Electric ToysElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 489. 1993-12-14Printed-Wiring BoardsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 492. 1993-12-14Household Electric Personal Grooming AppliancesElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 493. 1993-12-14Electric Hobby and Sports EquipmentElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 494. 1993-12-14Motor-Operated Household Food Preparing MachinesElectrical Products1993VoluntaryWithdrawnTT $94.00
TTS 495. 1993-12-14Hermetic Refrigerant Motor CompressorsElectrical Products1993CompulsoryWithdrawnTT$200.00
TTS 498. 1993-12-14Hair Clipping and Shaving AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 499. 1993-12-14Fluorescent Lighting Fixtures Electrical Products1993CompulsoryWithdrawnTT $135.00
TTS 500. 1993-12-14Incandescent Lighting FixturesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 501. 1993-12-14Motor Operated Massage and Exercise MachinesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 502. 1993-12-14Uninterruptable Power Supply EquipmentElectrical Products1993CompulsoryWithdrawnTT $250.00
1992
TTS 411:1992Specification for Compressed Natural Gas (CNG) - Vehicular Fuel SystemsMechanical Equipment and Packaging1992CompulsoryWithdrawnApplies to the design and installation of compressed natural gas (CNG) engine fuel systems on... Read MoreTT $96.00 + VATThis standard has been revised by TTS/NFPA 52:2017.
TTS 412:1992Glossary of Terms Relating to the Steel PanTourism1992VoluntaryWithdrawnDefines terms related to the steel pan movement.TT$47.00Replaced by: TTS 412:2015
TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 414. 1992Specifications for Unplasticized PVC Drain, Waste and Vent PipesMechanical Equipment and Packaging1992VoluntaryWithdrawnApplies to unplasticized polyvinyl chloride pipe for use as drainage, waste and vent systems... Read MoreTT $47.00
1991
TTS 16 40 400-1.1991Methods of Measurement and Evaluation of Defects in Timber - Part 1: LogsConstruction Products1991VoluntaryWithdrawnSpecifies methods of identification, measurement and quantitative evaluation of commonly occurring... Read MoreTT $47.00
TTS 16 80 300-1. 1991Methods of Test for Unplasticized Pipes and Fittings: Part 1: Determining the Softening Point of UPVC Pipes and FittingsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out the method for determining the softening point of unplasticized PVC pipes and fittingsTT$34.00
TTS 16 80 300-2. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 2: Longitudinal Reversion Test Methods and SpecificationMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the methods to be used for the determination of the longitudinal reversion of... Read MoreTT$34.00
TTS 16 80 300-3. 1991Methods of Test for Unplasticized PVC Pipes And Fittings: Part 3: Determining the Fracture Toughness of UPVC PipesMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-4. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 4: Effect of Sulphuric Acid - Requirement And Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-5. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 5: Specification and Measurement of OpacityMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the opacity of unplasticized polyvinyl chloride (PVC)... Read MoreTT$34.00
TTS 16 80 300-6. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 6: Extractability of Lead and Tin - Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method of test for the determination of the extractability of certain stabilizers of... Read MoreTT$34.00
TTS 16 80 300-7. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 7: Determination and Specification of Resistance to External BlowsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the apparatus and the procedure to be applied for the determination of the resistance to... Read MoreTT$34.00
TTS 16 80 300-8. 1991Methods of Test for Unplasticized PVC Pipes: Part 8: Method for Hydrostatic Pressure Testing of UPVC - Short-Term TestsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 16 80 300-9. 1991Methods of Test for Unplasticized PVC Pipes: Part 9: Methods of Test for Hydrostatic Pressure Testing of UPVC Pipes - Long Term TestMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 31 20 000. 1991Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology1991VoluntaryWithdrawnDefines three types of standard atmosphereTT $34.00
TTS 31 20 501. 1991Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology1991VoluntaryWithdrawnGives specifications for three types of standard atmosphereTT $34.00
TTS 31 20 503. 1991Preferred Test TemperaturesMetrology1991VoluntaryWithdrawnSpecifies preferred temperatures for use in testingTT $34.00
TTS 31 60 503. 1991Requirements and Methods of Test for Spark PlugsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies requirements and methods of test for spark plugs used in internal combustion engines.... Read MoreTT $34.00
TTS 31 60 504-1. 1991Main Dimensions of Spark Plugs for Road Vehicles - M14 X 1,25 Spark Plugs with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1.25 spark plugs with flat seating with normal or long... Read MoreTT$34.00
TTS 31 60 504-2. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M14 X 1,25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 X 1,25 spark plugs with conical seating with normal long... Read MoreTT$34.00
TTS 31 60 504-3. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M18 X 1,5 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of M18 X 1,5 spark plugs with conical seating and their cylinder... Read MoreTT$34.00
TTS 31 60 504-4. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 With Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of compact spark plugs M14 X 1,25 with flat seating and their... Read MoreTT$34.00
TTS 31 60 504-5. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1,25 compact spark plugs with conical seating and their... Read MoreTT$34.00
TTS 31 60 504-6. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M10 X 1 with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M10 x 1 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
TTS 31 60 504-7. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M12 X 1.25 with Flat SeatingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M12 x 1,25 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
1989
TTS 1 70 400. 1989Code of Practice for the Assessment, Licensing and Classification of Hotel AccommodationTourism1989VoluntaryWithdrawnSets out the procedures by which hotels are to be assessed and licensed, and the criteria by which... Read MoreTT $74.00
1988
TTS 21 40 003: 1988Textiles - Stitch Types - Classification and TerminologyTextiles1988VoluntaryWithdrawnClassifies, designates, describes and illustrates the various kinds of stitch types used in hand... Read MoreTT$94.00
TTS 21 40 004: 1988Textiles - Seam Types - Classification and TerminologyTextiles1988VoluntaryWithdrawnClassifies, illustrates and designates the various kinds of the most used stitched seams... Read MoreTT$135.00
TTS 21 40 005: 1988Determination of Mass - VocabularyTextiles1988VoluntaryWithdrawnDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreTT $34.00
TTS 21 40 006: 1988Textiles - Natural Fibres General Names and DefinitionsTextiles1988VoluntaryWithdrawnGives the generic names and definitions of the most important natural fibres according to their... Read MoreTT$34.00
TTS 21 40 007: 1988Textile Floor Coverings - Classification and TerminologyTextiles1988VoluntaryWithdrawnGives definitions of terms relating to textile floor coverings, and defines categories of these... Read MoreTT$47.00
TTS 21 40 008: 1988Burning Behaviour of Textiles and Textile Products - VocabularyTextiles1988VoluntaryWithdrawnDefines terms used in testing the burning behaviour of textiles and textile productsTT $34.00
TTS 21 40 009: 1988Textile - Designation of YarnsTextiles1988VoluntaryWithdrawnSpecifies two methods of indicating the composition of yarns, whether single, folded, cabled or... Read MoreTT $34.00
TTS 21 40 010: 1988Textiles - Universal System for Designating Linear Density (Tex System)Textiles1988VoluntaryWithdrawnGives the principles and recommended units of the Tex System for the expression of linear density.TT $34.00
TTS 21 40 200: 1988Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles1988VoluntaryWithdrawnSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreTT$34.00
TTS 21 40 201: 1988Textile Fibres - Some Methods of Sampling for TestingTextiles1988VoluntaryWithdrawnSpecifies several methods for preparing laboratory samples of fibers.TT$34.00
TTS 21 40 202: 1988Machine - Made Textile Floor Coverings - Sampling and Cutting Specimens for Physical TestsTextiles1988VoluntaryWithdrawnSpecifies a procedure to be followed when samples are taken either from a bulk supply of... Read MoreTT$34.00
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 21 40 301-1: 1988Textiles - Tests for Colour Fastness - General Principles of TestingTextiles1988VoluntaryWithdrawnProvides general information about the methods for testing colour fastness of textiles for the... Read MoreTT$34.00
TTS 21 40 301-10: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Heat TreatmentsTextiles1988VoluntaryWithdrawnTextiles- Tests for colour fastness- Colour fastness to heat treatmentsTT$34.00
TTS 21 40 301-11: 1988Textiles - Tests for Colour Fastness - Colour Fastness to VulcanizingTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of coloured textiles to vulcanizingTT$34.00
TTS 21 40 301-12: 1988Textiles - Test for Colour Fastness - Test Not Covered in Parts 1 through 11 or Part 13Textiles1988VoluntaryWithdrawnThere is no information on this standard0
TTS 21 40 301-13: 1988Textiles - Tests for Colour Fastness - Colourant CharacteristicsTextiles1988VoluntaryWithdrawnSpecifies a method to determine the effect on the colour of a dye, of dyeing in the presence of... Read MoreTT $34.00
TTS 21 40 301-2: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Light and WeatheringTextiles1988VoluntaryWithdrawnSpecifies a method intended for determining the resistance of the colour of textiles to the action... Read MoreTT $34.00
TTS 21 40 301-3: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Washing and LaunderingTextiles1988VoluntaryWithdrawnProvides a series of tests that have been established to investigate the fastness to washing and... Read MoreTT $34.00
TTS 21 40 301-5: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Aqueous AgenciesTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of the colour of textiles to immersion in aqueous... Read MoreTT $34.00
TTS 21 40 301-6: 1988Textiles- Tests For Colour Fastness- Standard Adjacent FabricsTextiles1988VoluntaryWithdrawnEstablishes general requirements for undyed adjacent fabrics which may be used for the assessment... Read MoreTT $34.00
TTS 21 40 301-7: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Atmospheric ContaminantsTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of colour of textiles to atmospheric contaminantsTT $34.00
TTS 21 40 301-8: 1988Textiles - Tests for Colour Fastness - Measurement of Colour and Colour DifferencesTextiles1988VoluntaryWithdrawnSpecifies a method for measuring the colour difference between two specimens of textile in any formTT $34.00
TTS 21 40 301-9: 1988Textiles - Tests for Colour Fastness - Colour Fastness to Bleaching AgenciesTextiles1988VoluntaryWithdrawnSpecifies a method for determining the resistance of colour in textiles to bleaching agenciesTT $34.00
TTS 21 40 303: 1988Textiles - Binary Fibre Mixtures - Quantitative Chemical AnalysisTextiles1988VoluntaryWithdrawnProvides methods for the quantitative chemical analysis of various binary mixtures of fibres in... Read MoreTT $47.00
TTS 21 40 304: 1988Textiles - Determination of Twist in Yarns - Direct Counting MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the direction of twist in terms of turns per unit... Read MoreTT$34.00
TTS 21 40 305: 1988Textiles - Yarn from Packages - Method of Determination of Breaking Load and Elongation at the Breaking Load ff Single Strands (CRL, CRE and CRT Testers)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the breaking load and breaking elongation of various... Read MoreTT $34.00
TTS 21 40 306: 1988 Textiles - Determination of Bursting Distension - Diaphragm MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the bursting strength and bursting distension of... Read MoreTT $34.00
TTS 21 40 307: 1988Textiles - Determination of PH of the Aqueous ExtractTextiles1988VoluntaryWithdrawnSpecifies a method for determining the pH value of the aqueous extract of textilesTT $34.00
TTS 21 40 309: 1988Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles1988VoluntaryWithdrawnSpecifies methods for the determination of the mass per unit length and the mass per unit area of... Read MoreTT $34.00
TTS 21 40 310: 1988Textile - Woven Fabrics - Measurement of Width of PiecesTextiles1988VoluntaryWithdrawnSpecifies two methods for the determination of the width of pieces of woven fabrics that are in the... Read MoreTT $34.00
TTS 21 40 311: 1988Textiles - Woven Fabrics - Measurement of Length of PiecesTextiles1988VoluntaryWithdrawnSpecifies two methods for the determination of the length of pieces of woven fabrics made up full... Read MoreTT $34.00
TTS 21 40 312: 1988Textiles - Determination of Dimensional Change in Washing and DryingTextiles1988VoluntaryWithdrawnSpecifies a method for determination of dimensional change of fabrics, garments or other textile... Read MoreTT $34.00
TTS 21 40 313: 1988Textiles - Woven Fabrics - Determination of Breaking Strength - and Elongation (Strip Method)Textiles1988VoluntaryWithdrawnSpecifies a method known as the (strip) method, for the determination of the breaking strength and... Read More0
TTS 21 40 314: 1988Textiles - Woven Fabrics - Determination of Breaking Strength- Grab MethodTextiles1988VoluntaryWithdrawnSpecifies a method known as the (grab)method, for the determination of the breaking strength of... Read MoreTT $34.00
TTS 21 40 315: 1988Textiles - Ternary Fibre Mixtures - Quantitative AnalysesTextiles1988VoluntaryWithdrawnSpecifies methods of quantitative analysis of various ternary mixtures of fibresTT $34.00
TTS 21 40 317: 1988Textiles - Domestic Washing And Drying Procedures For Textile TestingTextiles1988VoluntaryWithdrawnSpecifies domestic washing and drying procedures for textile testing of fabrics, garments or other... Read MoreTT $34.00
TTS 21 40 318: 1988Textiles - Yarn from Packages - Method of Test for Breaking Strength of Yarn - Skein MethodTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the breaking strength of yarn. This method is referred... Read MoreTT $34.00
TTS 21 40 319: 1988Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the dimensional change (shrinkage or stretch) of all... Read MoreTT $34.00
TTS 21 40 320: 1988Carpets - Determination of Number of Tufts and /or Loops Per Unit Length and Per Unit AreaTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the number of tufts and/or loops per unit length and... Read MoreTT $34.00
TTS 21 40 321: 1988Machine - Made Textile Floor Coverings - Determination of ThicknessTextiles1988VoluntaryWithdrawnSpecifies a basic method for the determination of the thickness of machine-made textile floor... Read MoreTT $34.00
TTS 21 40 322: 1988Carpets - Determination of Thickness of Pile Above the BackingTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of the thickness of pile above the substrate of a textile... Read MoreTT $34.00
TTS 21 40 323: 1988Textile Fibres - Determination of Linear Density - Gravimetric MethodTextiles1988VoluntaryWithdrawnSpecifies a gravimetric method for the determination of the linear density of textile fibres cut... Read MoreTT $34.00
TTS 21 40 324: 1988Textiles - Yarn From Packages - Determination of Linear Density Mass Per Unit Length (Skein Method)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the linear density of all types of yarn in package... Read MoreTT $34.00
TTS 21 40 326: 1988Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of RecoveryTextiles1988VoluntaryWithdrawnSpecifies a method for determining the angle of recovery of fabrics from creasingTT $34.00
TTS 21 40 327: 1988Machine - Made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat ConditionsTextiles1988VoluntaryWithdrawnSpecifies a procedure for the determination of the dimensional changes that take place when... Read MoreTT $34.00
TTS 21 40 328: 1988Rectangular Textile Floor Coverings - Determination of DimensionsTextiles1988VoluntaryWithdrawnSpecifies a method for determining the dimensions of a rectangular textile floor covering, both... Read MoreTT $34.00
TTS 21 40 329: 1988Textiles - Determination of Dimensional Change on Dry Cleaning in Perchlorethylene - Machine MethodTextiles1988VoluntaryWithdrawnSpecifies a dry cleaning procedure, using a commercial dry-cleaning machine, for the determination... Read MoreTT $34.00
TTS 21 40 331: 1988Textiles Floor Coverings - Determination of Thickness Loss After Prolonged, Heavy Static LoadingTextiles1988VoluntaryWithdrawnSpecifies a method for determination of thickness loss of textile floor coverings after prolonged,... Read MoreTT $34.00
TTS 21 40 332: 1988Textiles - Determination of Thickness of Woven and Knitted Fabrics (Other than Textile Floor Coverings)Textiles1988VoluntaryWithdrawnSpecifies a method for the determination of the thickness, when under a specific pressure, of woven... Read MoreTT $34.00
TTS 21 40 333-1: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles1988VoluntaryWithdrawnDeals with recording of fabric weaves and makes provision for showing the sequence in which yarns... Read MoreTT $34.00
TTS 21 40 333-2: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 2 - Determination of Number of Threads Per Unit LengthTextiles1988VoluntaryWithdrawnSpecifies three methods for the determination of the number of threads per centimeter in woven... Read MoreTT $34.00
TTS 21 40 333-3: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 3 - Determination of Crimp Yarn in FabricTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of crimp of yarn in fabricTT $34.00
TTS 21 40 333-4: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 4 - Determination of Twist in Yarn Removed from FabricTextiles1988VoluntaryWithdrawnSpecifies a method for the determination of twist in yarns, spun on conventional systems removed... Read MoreTT $34.00
TTS 21 40 333-5: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 5 - Determination of Linear Density of Yarn Removed from FabricTextiles1988VoluntaryWithdrawnSpecifies method for the determination of linear density of yarn removed from fabricTT $34.00
TTS 21 40 333-6: 1988Textiles - Woven Fabrics - Construction - Methods of Analysis: Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles1988VoluntaryWithdrawnSpecifies methods for determining the mass of warp and weft threads per unit area of fabric after... Read MoreTT $34.00
TTS 21 40 506: 1988Textiles - Woven Fabric DescriptionsTextiles1988VoluntaryWithdrawnGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreTT $34.00
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
1987
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 26 20 000.1987 Glossary of Electrotechnical, Power Telecommunication, Electronics, Lighting and Colour Terms: Terms Particular to Power Engineering; Electric Cable TechnologyElectrical Products1987VoluntaryWithdrawnTT $47.00
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
1986
TTS 16 35 510-1986Specification for Hollow Clay BlocksConstruction Products1986VoluntaryWithdrawnSpecifies requirements for hollowed blocks made from fired clay. Covers the general quality,... Read MoreTT $34.00Replaced by TTS 588:2015
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 31 45 502.1986Diameter of Clearance Holes and Counterbores for Bolts and ScrewsConstruction Products1986VoluntaryWithdrawnSpecifies the diameters of clearance holes and counterbores for bolts and machine screws for... Read MoreTT $34.00
TTS 31 60 303. 1986Dynamic Test Methods of Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies dynamic test method of seat belt assemblies for automobiles in accordance with provisions... Read MoreTT$34.00
TTS 31 60 304-1. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Adjustment DutyMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing, including that intended... Read MoreTT$34.00
TTS 31 60 304-10. 1986Methods of Testing Seat Belts: Determination of Static Strength and Dummy DisplacementMechanical Equipment and Packaging1986VoluntaryWithdrawnEstablishes a method for determining the static strength of a retractor, or seat belt assembly, or... Read MoreTT$34.00
TTS 31 60 304-11. 1986Methods of Testing Seat Belts: Determination of Webbing Retraction ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the webbing retracting force of a seat belt retractor0
TTS 31 60 304-12. 1986Methods of Testing Seat Belts: Determination of Retractor Locking Under AccelerationMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out methods for determining the locking response of a retractor under various conditions of... Read MoreTT$34.00
TTS 31 60 304-13. 1986Testing: Determination of Dynamic PerformanceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the dynamic performance of a seat belt assemblyTT$34.00
TTS 31 60 304-2. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Withdrawing and Retracting duty through a Sash GuideMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing passing through a sash... Read MoreTT$34.00
TTS 31 60 304-3 1986Methods of Testing Seat Belts: Determination of Fatigue Resistance of a Flexible MemberMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the effects of fatigue on flexible load bearing members designed... Read MoreTT$34.00
TTS 31 60 304-4. 1986Methods of Testing Seat Belts: Determination of Potential for Inadvertent Buckle ReleaseMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the potential for release of the buckle through inadvertent... Read MoreTT$34.00
TTS 31 60 304-5. 1986Methods of Testing Seat Belts: Determination of Fatigue Effect on Buckle Release ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the reduction of the release force due to fatigue of any spring... Read More0
TTS 31 60 304-6. 1986Methods of Testing Seat Belts: Determination of Adjustment Device ForcesMechanical Equipment and Packaging1986VoluntaryWithdrawnGives a method for determining the forces required to draw webbing through an adjustment device to... Read MoreTT$34.00
TTS 31 60 304-7. 1986Methods of Testing Seat Belts: Determination of Locking Angle of Tilt-Lock Adjustment DeviceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the angle between the adjustment device base and the webbing... Read MoreTT$34.00
TTS 31 60 304-8. 1986Methods of Testing Seat Belts: Determination of Free-End Device StrengthMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the endurance of a seat belt free-end restraint device when... Read More0
TTS 31 60 304-9. 1986Methods of Testing Seat Belts: Preparation and Conditioning of Test Specimens for Retractor FunctionMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for conditioning a seat belt retractor prior to testing for retractor functionTT$34.00
TTS 31 60 505-1986Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the seat belt assemblies for automobiles to accommodate one adult and to be fitted... Read MoreTT $74.00
TTS 31 60 512-1986Retractors for Motorists' Seat BeltsMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the retractor of the webbing as one of the elements of the motorist's seat belt.TT $34.00
TTS 31 60 519. 1986Seat Belt Assemblies for Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for seat belt assemblies for use by adults and larger children in motor... Read MoreTT$47.00
TTS 31 60 521-1986Webbing for Restraining Devices for Occupants of Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for webbing used for restraining devices and gives methods of test. Webbing... Read MoreTT$34.00To be reviewed shortly
1985
TTS 16 05 000-1985Building and Civil Engineering General Vocabulary- Part 1Construction Products1985VoluntaryWithdrawnDefines terms applicable to building and civil engineering works. TT $74.00
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 10 500-5: 1985Requirements for Labelling- Care Labelling of Textile ArticlesTextiles1985CompulsoryWithdrawnEstablishes a system of graphical symbols intended for use in the labeling of textile articles to... Read MoreTT $34.00
TTS 21 10 508. 1985Fertilizers - Marking - Presentation and DeclarationsAgriculture1985VoluntaryWithdrawnSpecifies the procedure for marking containers or labels for fertilizers, where national... Read MoreTT $34.00
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 21 60 401: 1985Guide to the Assessment of Garment QualityTextiles1985VoluntaryWithdrawnProvides a uniform system of reference data on the various constructional features, finishing and... Read MoreTT $34.00
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 45 500. 1985Safety Requirements for Mains Operated Electronic and Related EquipmentElectrical Products1985VoluntaryWithdrawnTT $34.00
TTS 6 15 200. 1985Fertilizers - Presentation of Sampling ReportsAgriculture1985VoluntaryWithdrawnSpecifies information to be given in sampling reports for consignments of fertilizersTT $34.00
TTS 6 15 201. 1985Fertilizers and Soil Conditioners - Final Samples - Practical ArrangementsAgriculture1985VoluntaryWithdrawnEstablishes practical arrangements relating to final samples of solid/fertilizers and soil... Read MoreTT $34.00
TTS 6 15 300. 1985Fertilizers - Determination of Bulk Density (Loose)Agriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the bulk density (loose) of solid fertilizers, except... Read MoreTT $34.00
TTS 6 15 301. 1985Fertilizers - Determination of Nitrate Nitrogen Content - Nitron Gravimetric MethodAgriculture1985VoluntaryWithdrawnSpecifies the nitrogen gravimetric method for the determination of the nitrogen content of... Read MoreTT $34.00
TTS 6 15 302. 1985Fertilizers - Determination of Bulk Density (Tapped)Agriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the bulk density (tapped) of solid fertilizers: the... Read MoreTT $34.00
TTS 6 15 303. 1985Fertilizers - Extraction of Water Soluble PhosphatesAgriculture1985VoluntaryWithdrawnSpecifies the method for the extraction of water soluble phosphates.TT $34.00
TTS 6 15 304. 1985Fertilizers - Determination of Potassium Content - Potassium Tetraphenylborate Gravimetric Method (Reference Method)Agriculture1985VoluntaryWithdrawnSpecifies a gravimetric method for the determination of the potassium content of test solutions of... Read MoreTT $34.00
TTS 6 15 305. 1985Fertilizers - Determination of Acid Soluble Potassium Content - Preparation of Test SolutionAgriculture1985VoluntaryWithdrawnSpecifies the reference method for the preparation of test solutions for fertilizers for the... Read MoreTT $34.00
TTS 6 15 306. 1985Fertilizers - Determination of Ammoniacal Nitrogen Content in the Presence of other Substances which Release Ammonia when TreatedAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the ammoniacal nitrogen content of fertilizers... Read MoreTT $34.00
TTS 6 15 400. 1985Fertilizers and Soil Conditioners - ClassificationAgriculture1985VoluntaryWithdrawnEstablishes a classification system for fertilizers and soil conditioners.TT $34.00
TTS 6 25 201. 1985Animal Feeding Stuffs - Preparation of Test SamplesAgriculture1985VoluntaryWithdrawnSpecifies methods for preparing test samples of animal feeding stuffsTT $34.00
TTS 6 25 300. 1985Agricultural Food Products - General Directions for the Determination of Nitrogen by the Kjeldahl MethodAgriculture1985VoluntaryWithdrawnGives general directions for the apparatus and procedures used for the determination of nitrogen in... Read MoreTT $34.00
TTS 6 25 301. 1985Animal Feeding Stuffs - Determination of Nitrogen Content and Calculation of Crude Protein ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the nitrogen content of animal feeding stuffs by the... Read MoreTT $34.00
TTS 6 25 302. 1985Animal Feeding Stuffs - Determination of Total Phosphorus Content - Spectrophotometric MethodAgriculture1985VoluntaryWithdrawnGives a spectrophotometric method for the determination of the total phosphorus content of animal... Read MoreTT $34.00
TTS 6 25 303. 1985Animals Feeding Stuffs - Determination of Crude Ash ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of crude ash in animal feeding stuffsTT $34.00
TTS 6 25 304. 1985Animal Feeding Stuffs - Determination of Ash Insoluble in Hydrochloric AcidAgriculture1985VoluntaryWithdrawnSpecifies two procedures for the determination of the ash of animal feeding stuffs which is... Read MoreTT $34.00
TTS 6 25 305. 1985Animal Feeding Stuffs - Determination of Water Soluble Chlorides ContentAgriculture1985VoluntaryWithdrawnGives methods to determine the water soluble chlorides content (sodium chloride) of animal feeding... Read MoreTT $34.00
TTS 6 25 306. 1985Animal Feeding Stuffs Determination of Calcium Content - Atomic Absorption Spectrometric MethodAgriculture1985VoluntaryWithdrawnSpecifies an atomic absorption spectrometric method for the determination of the calcium content of... Read MoreTT $34.00
TTS 6 25 307. 1985Animal Feeding Stuffs - Determination of Aflatoxin B1 ContentAgriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the aflatoxin B content of animal feeding stuffs.TT $34.00
TTS 6 25 308. 1985Animal Feeding Stuffs - Determination of Moisture ContentAgriculture1985VoluntaryWithdrawnSpecifies a method to determine the moisture content of animal feeding stuffsTT $34.00
TTS 6 25 309. 1985Agricultural Food Products - Determination of Crude Fibre Content, Modified Scharrer MethodAgriculture1985VoluntaryWithdrawnSpecifies a conventional method for the determination of the crude fibre content of agricultural... Read MoreTT $34.00
TTS 6 25 310. 1985Animal Feeding Stuffs - Determination of Diethyl Ether ExtractAgriculture1985VoluntaryWithdrawnSpecifies a method, comprising two procedures, according to the nature of the sample, for the... Read MoreTT $34.00
TTS 6 25 311. 1985Animal Feeding Stuffs - Determination of Available LysineAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the available lysine in animal feeding stuffs... Read MoreTT $34.00
1984
TTS 16 66 501.1984Requirements for the Care and Use of Portable Timber LaddersConstruction Products1984VoluntaryWithdrawnSpecifies requirements for the care and use of portable timber ladders. TT $34.00
TTS 21 20 500-3. 1984Requirements for Advertising - Advertising of Tobacco ProductsConsumer Products1984VoluntaryWithdrawnRegulates advertising of tobacco products by press, radio, television, cinema, posters and other... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 43 300: 1984Ropes - Sampling and Conditioning for TestingTextiles1984VoluntaryWithdrawnSpecifies the conditions of sampling of ropes for testingTT $34.00
TTS 21 43 500: 1984Ropes and Cordage - Colour Codes for IdentificationTextiles1984VoluntaryWithdrawnSpecifies a code of colors design for the identification marking of ropes and cordage appearing in... Read MoreTT $34.00
TTS 21 43 501: 1984Three or Four-Strand Manila and Sisal RopesTextiles1984VoluntaryWithdrawnSpecifies the essential characteristics of three or four-strand manila and sisal ropesTT $34.00
TTS 21 43 502: 1984Three-Strand (Hawser-Laid) and Eight-Strand (Plaited) Polypropylene Monofilament or Film Ropes - Required CharacteristicsTextiles1984VoluntaryWithdrawnDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read More
TTS 26 20 503. 1984Basic Requirements for Electro-Technical EquipmentElectrical Products1984VoluntaryWithdrawnSpecifies basic requirements for three classes of passive and active electrotechnical components... Read MoreTT $47.00
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 6 25 501. 1984Specification for Pig FeedAgriculture1984VoluntaryWithdrawnGives requirements for feeds for pigs (sus scrofa) whether these be in the form of pellets,... Read MoreTT $74.00
1983
TTS 26 45 502-1983Limits for Radio InterferenceTelecommunications1983VoluntaryWithdrawnSpecifies limits for the radio interference voltages and field strengths in the frequency range... Read MoreTT$34.00
TTS 31 05 402. 1983SI Units and Recommendations for the Use of their Multiples and of Certain Other UnitsMetrology1983VoluntaryWithdrawnDescribes the International System of Units, recommends selected decimal multiples and... Read MoreTT$34.00
TTS 31 50 500. 1983Basic Requirements for Full-Flow Lubrication Oil Filters for Internal Combustion EnginesMechanical Equipment and Packaging1983VoluntaryWithdrawnSpecifies the requirements, sampling and testing procedures for full flow oil lubricating filters... Read More$34.00
TTS 6 20 400. 1983Common Names for Pesticides and other AgrochemicalsAgriculture1983VoluntaryWithdrawnLists common names for certain pest control chemicals and plant growth regulators of international... Read MoreTT $135.00
1982
TTS 16 35 509:1982Specification for Non-Load Bearing Concrete Masonry UnitsConstruction Products1982VoluntaryWithdrawnSpecifies requirements for hollow non-load bearing concrete masonry units made from Portland... Read MoreTT $34.00
1980
TTS 21 10 500 -7: 1980Requirements for Labelling - Labelling of TextilesTextiles1980CompulsoryWithdrawnPrescribes the requirements for the labelling and advertising of textiles and certain consumer... Read MoreTT $34.00
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
1979
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 10 504. 1979Requirements for the Grading and Labelling of Table EggsAgriculture1979VoluntaryWithdrawnGives guidelines for grading and labeling of table eggs intended for retail trade according to mass... Read MoreTT $34.00
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 25 503. 1979Specification for Wheat MiddlingsAgriculture1979VoluntaryWithdrawnSpecifies the required composition (crude protein, crude fat and crude fibre) and labelling... Read MoreTT $34.00
1978
TTS 16 35 503-1978Specification for Hard Drawn Mild Steel Wire for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnSpecifies hard-drawn mild steel wire, which may be either plain or deformed, intended for use in... Read MoreTT $34.00
TTS 16 35 504.1978Specification for Steel Fabric for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnApplies to factory-made fabric for reinforcement of concrete, formed by the welding of plain,... Read MoreTT $34.00
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 26 20 400. 1978Schedule for Preferred Values for Resistors and CapacitorsElectrical Products1978VoluntaryWithdrawnGives a series of preferred values based on the 10/12 system (E series) for the resistance of fixed... Read MoreTT $34.00
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
1977
TTS 26 45 501. 1977Basic Requirements for Mains Operated Electrotechnical EquipmentElectrical Products1977VoluntaryWithdrawnSpecifies basic requirements for mains-operated electrotechnical apparatus for indoor and outdoor... Read MoreTT $34.00
TTS 6 25 500. 1977Specifications for Poultry FeedAgriculture1977VoluntaryWithdrawnGives the technical requirements for poultry feeds whether these be in the form of pellets,... Read MoreTT $74.00
1976
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Agriculture
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 10 504. 1979Requirements for the Grading and Labelling of Table EggsAgriculture1979VoluntaryWithdrawnGives guidelines for grading and labeling of table eggs intended for retail trade according to mass... Read MoreTT $34.00
TTS 21 10 508. 1985Fertilizers - Marking - Presentation and DeclarationsAgriculture1985VoluntaryWithdrawnSpecifies the procedure for marking containers or labels for fertilizers, where national... Read MoreTT $34.00
TTS 40: 1995The Classification of Pesticides and Certain Toxic Agricultural ChemicalsAgriculture1995CompulsoryWithdrawnThis standard classifies plant growth regulators, pesticides, defoliants, plant desiccants,... Read MoreTT $135.00
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 6 15 200. 1985Fertilizers - Presentation of Sampling ReportsAgriculture1985VoluntaryWithdrawnSpecifies information to be given in sampling reports for consignments of fertilizersTT $34.00
TTS 6 15 201. 1985Fertilizers and Soil Conditioners - Final Samples - Practical ArrangementsAgriculture1985VoluntaryWithdrawnEstablishes practical arrangements relating to final samples of solid/fertilizers and soil... Read MoreTT $34.00
TTS 6 15 300. 1985Fertilizers - Determination of Bulk Density (Loose)Agriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the bulk density (loose) of solid fertilizers, except... Read MoreTT $34.00
TTS 6 15 301. 1985Fertilizers - Determination of Nitrate Nitrogen Content - Nitron Gravimetric MethodAgriculture1985VoluntaryWithdrawnSpecifies the nitrogen gravimetric method for the determination of the nitrogen content of... Read MoreTT $34.00
TTS 6 15 302. 1985Fertilizers - Determination of Bulk Density (Tapped)Agriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the bulk density (tapped) of solid fertilizers: the... Read MoreTT $34.00
TTS 6 15 303. 1985Fertilizers - Extraction of Water Soluble PhosphatesAgriculture1985VoluntaryWithdrawnSpecifies the method for the extraction of water soluble phosphates.TT $34.00
TTS 6 15 304. 1985Fertilizers - Determination of Potassium Content - Potassium Tetraphenylborate Gravimetric Method (Reference Method)Agriculture1985VoluntaryWithdrawnSpecifies a gravimetric method for the determination of the potassium content of test solutions of... Read MoreTT $34.00
TTS 6 15 305. 1985Fertilizers - Determination of Acid Soluble Potassium Content - Preparation of Test SolutionAgriculture1985VoluntaryWithdrawnSpecifies the reference method for the preparation of test solutions for fertilizers for the... Read MoreTT $34.00
TTS 6 15 306. 1985Fertilizers - Determination of Ammoniacal Nitrogen Content in the Presence of other Substances which Release Ammonia when TreatedAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the ammoniacal nitrogen content of fertilizers... Read MoreTT $34.00
TTS 6 15 400. 1985Fertilizers and Soil Conditioners - ClassificationAgriculture1985VoluntaryWithdrawnEstablishes a classification system for fertilizers and soil conditioners.TT $34.00
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 6 20 400. 1983Common Names for Pesticides and other AgrochemicalsAgriculture1983VoluntaryWithdrawnLists common names for certain pest control chemicals and plant growth regulators of international... Read MoreTT $135.00
TTS 6 25 201. 1985Animal Feeding Stuffs - Preparation of Test SamplesAgriculture1985VoluntaryWithdrawnSpecifies methods for preparing test samples of animal feeding stuffsTT $34.00
TTS 6 25 300. 1985Agricultural Food Products - General Directions for the Determination of Nitrogen by the Kjeldahl MethodAgriculture1985VoluntaryWithdrawnGives general directions for the apparatus and procedures used for the determination of nitrogen in... Read MoreTT $34.00
TTS 6 25 301. 1985Animal Feeding Stuffs - Determination of Nitrogen Content and Calculation of Crude Protein ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the nitrogen content of animal feeding stuffs by the... Read MoreTT $34.00
TTS 6 25 302. 1985Animal Feeding Stuffs - Determination of Total Phosphorus Content - Spectrophotometric MethodAgriculture1985VoluntaryWithdrawnGives a spectrophotometric method for the determination of the total phosphorus content of animal... Read MoreTT $34.00
TTS 6 25 303. 1985Animals Feeding Stuffs - Determination of Crude Ash ContentAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of crude ash in animal feeding stuffsTT $34.00
TTS 6 25 304. 1985Animal Feeding Stuffs - Determination of Ash Insoluble in Hydrochloric AcidAgriculture1985VoluntaryWithdrawnSpecifies two procedures for the determination of the ash of animal feeding stuffs which is... Read MoreTT $34.00
TTS 6 25 305. 1985Animal Feeding Stuffs - Determination of Water Soluble Chlorides ContentAgriculture1985VoluntaryWithdrawnGives methods to determine the water soluble chlorides content (sodium chloride) of animal feeding... Read MoreTT $34.00
TTS 6 25 306. 1985Animal Feeding Stuffs Determination of Calcium Content - Atomic Absorption Spectrometric MethodAgriculture1985VoluntaryWithdrawnSpecifies an atomic absorption spectrometric method for the determination of the calcium content of... Read MoreTT $34.00
TTS 6 25 307. 1985Animal Feeding Stuffs - Determination of Aflatoxin B1 ContentAgriculture1985VoluntaryWithdrawnSpecifies two methods for the determination of the aflatoxin B content of animal feeding stuffs.TT $34.00
TTS 6 25 308. 1985Animal Feeding Stuffs - Determination of Moisture ContentAgriculture1985VoluntaryWithdrawnSpecifies a method to determine the moisture content of animal feeding stuffsTT $34.00
TTS 6 25 309. 1985Agricultural Food Products - Determination of Crude Fibre Content, Modified Scharrer MethodAgriculture1985VoluntaryWithdrawnSpecifies a conventional method for the determination of the crude fibre content of agricultural... Read MoreTT $34.00
TTS 6 25 310. 1985Animal Feeding Stuffs - Determination of Diethyl Ether ExtractAgriculture1985VoluntaryWithdrawnSpecifies a method, comprising two procedures, according to the nature of the sample, for the... Read MoreTT $34.00
TTS 6 25 311. 1985Animal Feeding Stuffs - Determination of Available LysineAgriculture1985VoluntaryWithdrawnSpecifies a method for the determination of the available lysine in animal feeding stuffs... Read MoreTT $34.00
TTS 6 25 500. 1977Specifications for Poultry FeedAgriculture1977VoluntaryWithdrawnGives the technical requirements for poultry feeds whether these be in the form of pellets,... Read MoreTT $74.00
TTS 6 25 501. 1984Specification for Pig FeedAgriculture1984VoluntaryWithdrawnGives requirements for feeds for pigs (sus scrofa) whether these be in the form of pellets,... Read MoreTT $74.00
TTS 6 25 503. 1979Specification for Wheat MiddlingsAgriculture1979VoluntaryWithdrawnSpecifies the required composition (crude protein, crude fat and crude fibre) and labelling... Read MoreTT $34.00
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS 76-8:1995Requirements for Labelling - Part 8 Labelling of Retail Packages of PesticidesAgriculture1995VoluntaryWithdrawnThis standard specifies the information to be included on labels of pesticide packages as well as... Read MoreTT $94.00
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
Chemistry
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 58:2010Sodium Hypochlorite Solutions (Liquid Chlorine Bleaches) -Specification (3rd Revision)Chemistry2010CompulsoryWithdrawnThis standard specifies the requirements and test methods for all sodium hypochlorite solutions... Read MoreTT $96.00 + VATReplaced by: TTS 58:2018 and TTCS 1:2018
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
Cocoa
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
Construction Codes
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
Construction Products
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS 16 05 000-1985Building and Civil Engineering General Vocabulary- Part 1Construction Products1985VoluntaryWithdrawnDefines terms applicable to building and civil engineering works. TT $74.00
TTS 16 35 503-1978Specification for Hard Drawn Mild Steel Wire for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnSpecifies hard-drawn mild steel wire, which may be either plain or deformed, intended for use in... Read MoreTT $34.00
TTS 16 35 504.1978Specification for Steel Fabric for the Reinforcement of ConcreteConstruction Products1978VoluntaryWithdrawnApplies to factory-made fabric for reinforcement of concrete, formed by the welding of plain,... Read MoreTT $34.00
TTS 16 35 509:1982Specification for Non-Load Bearing Concrete Masonry UnitsConstruction Products1982VoluntaryWithdrawnSpecifies requirements for hollow non-load bearing concrete masonry units made from Portland... Read MoreTT $34.00
TTS 16 35 510-1986Specification for Hollow Clay BlocksConstruction Products1986VoluntaryWithdrawnSpecifies requirements for hollowed blocks made from fired clay. Covers the general quality,... Read MoreTT $34.00Replaced by TTS 588:2015
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 16 40 400-1.1991Methods of Measurement and Evaluation of Defects in Timber - Part 1: LogsConstruction Products1991VoluntaryWithdrawnSpecifies methods of identification, measurement and quantitative evaluation of commonly occurring... Read MoreTT $47.00
TTS 16 66 501.1984Requirements for the Care and Use of Portable Timber LaddersConstruction Products1984VoluntaryWithdrawnSpecifies requirements for the care and use of portable timber ladders. TT $34.00
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 31 45 502.1986Diameter of Clearance Holes and Counterbores for Bolts and ScrewsConstruction Products1986VoluntaryWithdrawnSpecifies the diameters of clearance holes and counterbores for bolts and machine screws for... Read MoreTT $34.00
TTS 416:2002Steel Nails - SpecificationConstruction Products2002CompulsoryWithdrawnThis standard specifies requirements, including, dimensions, materials, finish and sampling for:... Read MoreTT $135.00Replaced by TTS 625-1:2012
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 584:PART 1: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Specification (Amendment)Construction Products2007CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreFree.To be replaced shortly.
TTS 584:Part 1:2002Portland Cement - Ordinary and Rapid-Hardening - SpecificationConstruction Products2002CompulsoryWithdrawnSpecifies requirements for ordinary and rapid-hardening Portland cement. It includes requirements... Read MoreTT $96.00 + VATTo be replaced shortly.
TTS 584:PART 2: 2002/Amendment 1 (2007)Portland Cement - Ordinary and Rapid Hardening - Chemical Test Methods (Amendment)Construction Products2007VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreFree.To be replaced shortly.
TTS 584:Part 2:2002Portland Cement - Ordinary and Rapid - Hardening - Chemical Test MethodsConstruction Products2002VoluntaryWithdrawnDescribes the procedures for the chemical analysis of cement. Describes the reference and, in... Read MoreTT $136.00 + VATTo be replaced shortly.
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 590:2002TLA-Raw Materials - Materials SpecificationConstruction Products2002VoluntaryWithdrawnThis specification follows the performance characteristics of Trinidad Lake Asphalt. TT $47.00
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 593:2003Modified Trinidad Lake Asphalt- SpecificationConstruction Products2003VoluntaryWithdrawnThis specification covers Modified Trinidad Lake Asphalt over the penetration grades covered in 1.2... Read MoreTT $74.00
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VATTo be Replaced by: TTS 598:2019, Cold-formed steel framing members for structural applications - Specification (1st Revision)
TTS 598:2019Cold-formed steel framing members for structural applications - Specification (1st Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies requirements for cold-formed steel framing members for use in structural... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 598:2012, Cold Formed Steel Framing Members for Structural Applications - Specification
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VATTo be Replaced by: TTS 69:2019, Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)
TTS 69:2019Profiled steel sheets for roofing and siding applications - Specification (2nd Revision)Construction Products2019CompulsoryCurrent - Publication of Legal NoticesThis standard specifies minimum requirements for metallic-coated steel sheets profiled for roofing... Read MoreTT $96.00 + V.A.T.To Supersede: TTS 69:2012, Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
Consumer Products
TTS 21 20 500-3. 1984Requirements for Advertising - Advertising of Tobacco ProductsConsumer Products1984VoluntaryWithdrawnRegulates advertising of tobacco products by press, radio, television, cinema, posters and other... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 469. 1993-10-26Household Electric Storage Tank Water HeatersConsumer Products1993CompulsoryWithdrawnTT $200.00
TTS 477. 1994Specification for Safety MatchesConsumer Products1994VoluntaryWithdrawnGives testing requirements for safety wood matches and book matches.TT $74.00
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 94-1:2010Requirements for Advertising - Part 1: General PrinciplesConsumer Products2010VoluntaryWithdrawnThis standard sets out general requirements for the contents of advertising that are published,... Read MoreTT $96.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
Electrical Codes
TTS 171:PART 1:2002Trinidad and Tobago Electrical Wiring Code - Part 1 - Low Voltage Installations (Including Amendment 1 (2007))Electrical Codes2002VoluntaryWithdrawnLays down requirements for the installation, inspection, testing and maintenance of electrical... Read More$150.00Includes Amendment 1 (2007) TTS 171:Part 1:2002 is under revision.
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
Electrical Products
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 179:2005Lead-Acid Starter Batteries - Specification (2nd Revision)Electrical Products2005CompulsoryWithdrawnThis standard specifies requirements and test methods for vented and valve regulated lead-acid... Read MoreTT $300.00Replaced by TTS/IEC 60095-1:2014
TTS 26 20 000.1987 Glossary of Electrotechnical, Power Telecommunication, Electronics, Lighting and Colour Terms: Terms Particular to Power Engineering; Electric Cable TechnologyElectrical Products1987VoluntaryWithdrawnTT $47.00
TTS 26 20 400. 1978Schedule for Preferred Values for Resistors and CapacitorsElectrical Products1978VoluntaryWithdrawnGives a series of preferred values based on the 10/12 system (E series) for the resistance of fixed... Read MoreTT $34.00
TTS 26 20 503. 1984Basic Requirements for Electro-Technical EquipmentElectrical Products1984VoluntaryWithdrawnSpecifies basic requirements for three classes of passive and active electrotechnical components... Read MoreTT $47.00
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 45 500. 1985Safety Requirements for Mains Operated Electronic and Related EquipmentElectrical Products1985VoluntaryWithdrawnTT $34.00
TTS 26 45 501. 1977Basic Requirements for Mains Operated Electrotechnical EquipmentElectrical Products1977VoluntaryWithdrawnSpecifies basic requirements for mains-operated electrotechnical apparatus for indoor and outdoor... Read MoreTT $34.00
TTS 296: 2005Electric Cables - PVC Insulated, Non-Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2005VoluntaryWithdrawnTT $1200.00
TTS 468. 1993-10-26Household Electric RangesElectrical Products1993VoluntaryWithdrawnTT $200.00
TTS 470:1993Electric FansElectrical Products1993VoluntaryWithdrawnTT $74.00
TTS 471. 1993-10-26Microwave Cooking Appliances Electrical Products1993CompulsoryWithdrawnTT $94.00
TTS 478. 1993-12-14General-Use Snap SwitchesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 479: 1993-12-14Portable Electric ToolsElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 481. 1993-12-14Flexible Cord and Fixture Wire Electrical Products1993CompulsoryWithdrawnTT$94.00
TTS 482. 1993-12-14Motor-Operated AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 483. 1993-12-14Household Refrigerators and FreezersElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 485. 1993-12-14Insulating TapeElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 486. 1993-12-14Christmas-Tree and Decorative Lighting OutfitsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 488. 1993-12-14Electric ToysElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 489. 1993-12-14Printed-Wiring BoardsElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 492. 1993-12-14Household Electric Personal Grooming AppliancesElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 493. 1993-12-14Electric Hobby and Sports EquipmentElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 494. 1993-12-14Motor-Operated Household Food Preparing MachinesElectrical Products1993VoluntaryWithdrawnTT $94.00
TTS 495. 1993-12-14Hermetic Refrigerant Motor CompressorsElectrical Products1993CompulsoryWithdrawnTT$200.00
TTS 498. 1993-12-14Hair Clipping and Shaving AppliancesElectrical Products1993CompulsoryWithdrawnTT $94.00
TTS 499. 1993-12-14Fluorescent Lighting Fixtures Electrical Products1993CompulsoryWithdrawnTT $135.00
TTS 500. 1993-12-14Incandescent Lighting FixturesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 501. 1993-12-14Motor Operated Massage and Exercise MachinesElectrical Products1993CompulsoryWithdrawnTT $135.00
TTS 502. 1993-12-14Uninterruptable Power Supply EquipmentElectrical Products1993CompulsoryWithdrawnTT $250.00
TTS 506: 2005Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawn
TTS 507: 2005Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2005VoluntaryWithdrawnAvailable on request
TTS 508: 2005Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2005VoluntaryWithdrawnTT $1300.00
TTS 509/1.1. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.1 Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical PropertiesElectrical Products1994VoluntaryWithdrawnTT $94.00
TTS 509/1.2. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.2 Thermal Ageing MethodsElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/1.3. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.3 Methods for Determining the Density - Water Absorption Tests-Shrinkage TestElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/1.4. 1994Insulating and Sheathing Materials of Electric Cables - Part 1 - Methods of Test for General Application - Section 1.4 Tests at Low TemperatureElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/2.1. 1994Insulating and Sheathing Materials of Electric Cables Part 2 - Methods of Test Specific to Elastomeric Compounds - Section 2.1 Ozone Resistance Test - Hot Set Test - Mineral Oil Immersion TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/3.1. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC CompoundsElectrical Products1994VoluntaryWithdrawnTT$74.00
TTS 509/3.2. 1994Insulating and Sheathing Materials of Electric Cables Part 3 - Methods of Test Specific to PVC Compounds - Section 3.2 Loss of Mass TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.1. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.1 Resistance to Environmental Stress Cracking - Wrapping Test After Thermal Ageing in Air - Measurement of the Melt Flow Index - Carbon Black and/or Mineral Content Measurement in PEElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/4.2. 1994Insulating and Sheathing Materials of Electric Cables Part 4 - Methods of Test Specific to Polyethylene and Polypropylene Compounds - Section 4.2 Elongation at Break After Pre-Conditioning - Wrapping Test After Pre-Conditioning - Wrapping Test After ThermalElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/5.1. 1994Insulating and Sheathing Materials of Electric Cables Part 5 - Methods of Test Specific to Filling Compounds - Section 5.1 Drop-Point - Separation of Oil-Lower Temperature Brittleness - Total Acid Number - Absence of Corrosive Components - Permittivity at 2Electrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.1. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 to 5 Non-Electrical TestElectrical Products1994VoluntaryWithdrawnTT $74.00
TTS 509/6.2. 1994Insulating and Sheathing Materials of Electric Cables Part 6 - Test Methods Not Specified in Parts 1 To 5 Electrical TestsElectrical Products1994VoluntaryWithdrawnTT $47.00
TTS 520. 1995Thermal Cutoffs for Use in Electrical Appliances and ComponentsElectrical Products1995CompulsoryWithdrawnTT $74.00
TTS 521. 1995Class 2 Power UnitsElectrical Products1995CompulsoryWithdrawnTT $94.00
TTS 522. 1995Electric MotorsElectrical Products1995VoluntaryWithdrawnTT $74.00
TTS 523. 1995Fluorescent-Lamp BallastsElectrical Products1995CompulsoryWithdrawnTT $135.00
TTS 524. 1995Power SuppliesElectrical Products1995CompulsoryWithdrawnTT $200.00
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS 76: Part 13:2010 Requirements for Labelling - Part 13: Labelling of Electrical Appliances (2nd Revision)Electrical Products2010CompulsoryWithdrawnThis National Standard applies to the labelling requirements for all electrical appliances that are... Read MoreTT $96.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5467: 2008Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/BS 6004: 2008Electric Cables - PVC Insulated, Non Armoured Cables for Voltages up to and Including 450/750 V, for Electric Power, Lighting and Internal WiringElectrical Products2008CompulsoryWithdrawnSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestBeing replaced by TTS 639:2014.
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7889:2007Specification for 600/1000 V Single-Core Unarmoured Electric Cables Having Thermosetting InsulationElectrical Products2007VoluntaryWithdrawnTT $740.00
TTS/BS 7889:2008Electric Cables - Thermosetting Insulated, Unarmoured Cables for a Voltage of 600/1000 VElectrical Products2008CompulsoryWithdrawnSpecifies requirements for construction and describes methods of test for unarmoured single - core... Read MoreTT $740.00
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/IEC 60968:2008Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2008CompulsoryWithdrawnThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreTT $487.00Being replaced by TTS/IEC 60968:2014
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
TTS/UL 489:2008Molded-Case Circuit Breakers, Molded Case Switches and Circuit-Breaker EnclosuresElectrical Products2008CompulsoryWithdrawnAvailable on request
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Environment
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 558:2001Motor Vehicles - Exhaust Emissions - SpecificationEnvironment2001VoluntaryWithdrawnSpecifies the maximum permissible limits of the key pollutants of the exhaust emissions from motor... Read MoreTT$94.00
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS/ISO 14001:2007Environmental Management Systems - Requirements with Guidance for UseEnvironment2007VoluntaryWithdrawnSpecifies requirements for an environmental management system to enable an organization to develop... Read MoreTT $850.00
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
Food technology
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
Funeral homes
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
Generalities
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
Health and Safety
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
Mechanical Equipment and Packaging
TTS 16 80 300-1. 1991Methods of Test for Unplasticized Pipes and Fittings: Part 1: Determining the Softening Point of UPVC Pipes and FittingsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out the method for determining the softening point of unplasticized PVC pipes and fittingsTT$34.00
TTS 16 80 300-2. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 2: Longitudinal Reversion Test Methods and SpecificationMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the methods to be used for the determination of the longitudinal reversion of... Read MoreTT$34.00
TTS 16 80 300-3. 1991Methods of Test for Unplasticized PVC Pipes And Fittings: Part 3: Determining the Fracture Toughness of UPVC PipesMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-4. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 4: Effect of Sulphuric Acid - Requirement And Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the effect of sulphuric acid on uplasticized polyvinyl... Read MoreTT$34.00
TTS 16 80 300-5. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 5: Specification and Measurement of OpacityMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method for the determination of the opacity of unplasticized polyvinyl chloride (PVC)... Read MoreTT$34.00
TTS 16 80 300-6. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 6: Extractability of Lead and Tin - Test MethodMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies a method of test for the determination of the extractability of certain stabilizers of... Read MoreTT$34.00
TTS 16 80 300-7. 1991Methods of Test for Unplasticized Polyvinyl Chloride (PVC) Pipes: Part 7: Determination and Specification of Resistance to External BlowsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the apparatus and the procedure to be applied for the determination of the resistance to... Read MoreTT$34.00
TTS 16 80 300-8. 1991Methods of Test for Unplasticized PVC Pipes: Part 8: Method for Hydrostatic Pressure Testing of UPVC - Short-Term TestsMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 16 80 300-9. 1991Methods of Test for Unplasticized PVC Pipes: Part 9: Methods of Test for Hydrostatic Pressure Testing of UPVC Pipes - Long Term TestMechanical Equipment and Packaging1991VoluntaryWithdrawnSets out a method for hydrostatic pressure testing of unplasticized PVC pipes for pressure... Read MoreTT$34.00
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 31 50 500. 1983Basic Requirements for Full-Flow Lubrication Oil Filters for Internal Combustion EnginesMechanical Equipment and Packaging1983VoluntaryWithdrawnSpecifies the requirements, sampling and testing procedures for full flow oil lubricating filters... Read More$34.00
TTS 31 60 303. 1986Dynamic Test Methods of Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies dynamic test method of seat belt assemblies for automobiles in accordance with provisions... Read MoreTT$34.00
TTS 31 60 304-1. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Adjustment DutyMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing, including that intended... Read MoreTT$34.00
TTS 31 60 304-10. 1986Methods of Testing Seat Belts: Determination of Static Strength and Dummy DisplacementMechanical Equipment and Packaging1986VoluntaryWithdrawnEstablishes a method for determining the static strength of a retractor, or seat belt assembly, or... Read MoreTT$34.00
TTS 31 60 304-11. 1986Methods of Testing Seat Belts: Determination of Webbing Retraction ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the webbing retracting force of a seat belt retractor0
TTS 31 60 304-12. 1986Methods of Testing Seat Belts: Determination of Retractor Locking Under AccelerationMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out methods for determining the locking response of a retractor under various conditions of... Read MoreTT$34.00
TTS 31 60 304-13. 1986Testing: Determination of Dynamic PerformanceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the dynamic performance of a seat belt assemblyTT$34.00
TTS 31 60 304-2. 1986Methods of Testing Seat Belts: Determination of Webbing Durability in Withdrawing and Retracting duty through a Sash GuideMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the durability of seat belt webbing passing through a sash... Read MoreTT$34.00
TTS 31 60 304-3 1986Methods of Testing Seat Belts: Determination of Fatigue Resistance of a Flexible MemberMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the effects of fatigue on flexible load bearing members designed... Read MoreTT$34.00
TTS 31 60 304-4. 1986Methods of Testing Seat Belts: Determination of Potential for Inadvertent Buckle ReleaseMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out a method for determining the potential for release of the buckle through inadvertent... Read MoreTT$34.00
TTS 31 60 304-5. 1986Methods of Testing Seat Belts: Determination of Fatigue Effect on Buckle Release ForceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the reduction of the release force due to fatigue of any spring... Read More0
TTS 31 60 304-6. 1986Methods of Testing Seat Belts: Determination of Adjustment Device ForcesMechanical Equipment and Packaging1986VoluntaryWithdrawnGives a method for determining the forces required to draw webbing through an adjustment device to... Read MoreTT$34.00
TTS 31 60 304-7. 1986Methods of Testing Seat Belts: Determination of Locking Angle of Tilt-Lock Adjustment DeviceMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the angle between the adjustment device base and the webbing... Read MoreTT$34.00
TTS 31 60 304-8. 1986Methods of Testing Seat Belts: Determination of Free-End Device StrengthMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for determining the endurance of a seat belt free-end restraint device when... Read More0
TTS 31 60 304-9. 1986Methods of Testing Seat Belts: Preparation and Conditioning of Test Specimens for Retractor FunctionMechanical Equipment and Packaging1986VoluntaryWithdrawnSets out the method for conditioning a seat belt retractor prior to testing for retractor functionTT$34.00
TTS 31 60 503. 1991Requirements and Methods of Test for Spark PlugsMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies requirements and methods of test for spark plugs used in internal combustion engines.... Read MoreTT $34.00
TTS 31 60 504-1. 1991Main Dimensions of Spark Plugs for Road Vehicles - M14 X 1,25 Spark Plugs with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1.25 spark plugs with flat seating with normal or long... Read MoreTT$34.00
TTS 31 60 504-2. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M14 X 1,25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 X 1,25 spark plugs with conical seating with normal long... Read MoreTT$34.00
TTS 31 60 504-3. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M18 X 1,5 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of M18 X 1,5 spark plugs with conical seating and their cylinder... Read MoreTT$34.00
TTS 31 60 504-4. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 With Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies the main characteristics of compact spark plugs M14 X 1,25 with flat seating and their... Read MoreTT$34.00
TTS 31 60 504-5. 1991Main Dimensions of Spark Plugs for Road Vehicles - Compact Spark Plugs M14 X 1.25 with Conical Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M14 x 1,25 compact spark plugs with conical seating and their... Read MoreTT$34.00
TTS 31 60 504-6. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M10 X 1 with Flat Seating and their Cylinder Head HousingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M10 x 1 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
TTS 31 60 504-7. 1991Main Dimensions of Spark Plugs for Road Vehicles - Spark Plugs M12 X 1.25 with Flat SeatingMechanical Equipment and Packaging1991VoluntaryWithdrawnSpecifies main characteristics of M12 x 1,25 spark plugs with flat seating and their cylinder head... Read MoreTT$34.00
TTS 31 60 505-1986Seat Belt Assemblies for AutomobilesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the seat belt assemblies for automobiles to accommodate one adult and to be fitted... Read MoreTT $74.00
TTS 31 60 512-1986Retractors for Motorists' Seat BeltsMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies the retractor of the webbing as one of the elements of the motorist's seat belt.TT $34.00
TTS 31 60 519. 1986Seat Belt Assemblies for Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for seat belt assemblies for use by adults and larger children in motor... Read MoreTT$47.00
TTS 31 60 521-1986Webbing for Restraining Devices for Occupants of Motor VehiclesMechanical Equipment and Packaging1986VoluntaryWithdrawnSpecifies requirements for webbing used for restraining devices and gives methods of test. Webbing... Read MoreTT$34.00To be reviewed shortly
TTS 411:1992Specification for Compressed Natural Gas (CNG) - Vehicular Fuel SystemsMechanical Equipment and Packaging1992CompulsoryWithdrawnApplies to the design and installation of compressed natural gas (CNG) engine fuel systems on... Read MoreTT $96.00 + VATThis standard has been revised by TTS/NFPA 52:2017.
TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 414. 1992Specifications for Unplasticized PVC Drain, Waste and Vent PipesMechanical Equipment and Packaging1992VoluntaryWithdrawnApplies to unplasticized polyvinyl chloride pipe for use as drainage, waste and vent systems... Read MoreTT $47.00
TTS 414-1:2007Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings - Specification - Part 1 - Heavy Duty ApplicationsMechanical Equipment and Packaging2007CompulsoryWithdrawnThis specification covers requirements and test methods for materials, dimensions and tolerances,... Read MoreTT $200.00
TTS 425/1. 1993-07-27Crane Code Vocabulary: Part 1: GeneralMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms concerning the main types of crane, parameters, general concepts of component partsTT $135.00
TTS 425/2. 1993-07-27Crane Code Vocabulary: Part 2: Mobile CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnDefines terms relating to the basic types of self-powered mobile cranesTT $47.00
TTS 426/1: 93Crane Code: Part 1: General Requirements - DesignMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies requirements for cranes and like lifting appliances, including design, construction and... Read MoreTT $135.00
TTS 426/11. 1993-07-27Crane Code: Part 11: SlingsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection and maintenance of slings for... Read MoreTT $150.00
TTS 426/12. 1993Crane Code: Part 12: HooksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of hooks used in... Read MoreTT $47.00
TTS 426/13. 1993Crane Code: Part 13: Monorails And Underhung CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnCovers the construction, installation, operation, inspection, and maintenance of underhung cranes... Read MoreTT $74.00
TTS 426/14. 1993Crane Code: Part 14: Handling Loads Suspended From RotorcraftMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the protection of ground personnel working directly with or in the vicinity of... Read MoreTT $47.00
TTS 426/15. 1993Crane Code: Part 15: Storage/Retrieval (S/R) Machines and Associated EquipmentMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $47.00
TTS 426/16. 1993Crane Code: Part 16: Side Boom TractorsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to manufacture, installation, inspection, testing, maintenance, and operation of side boom... Read MoreTT $47.00
TTS 426/17. 1993-07-27Crane Code: Part 17: Overhead Hoists (Underhung)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of manually... Read MoreTT $47.00
TTS 426/18. 1993-07-27Crane Code: Part 18: Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoists)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/19. 1993-07-27Crane Code: Part 19: Stacker Cranes (Top or Running Bridge Multiple Girder with Top or Under Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $47.00
TTS 426/2. 1993-07-27Crane Code: Part 2: General Requirements - Safe Use and MaintenanceMechanical Equipment and Packaging1993VoluntaryWithdrawnGives recommendations for the safe use of cranes. It does not cover manually operated and light... Read MoreTT $74.00
TTS 426/20. 1993-07-27Crane Code: Part 20: CablewaysMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to all load transporting, hoisting, and lowering cable-supported systems operating on and... Read MoreTT $47.00
TTS 426/21. 1993-07-27Crane Code: Part 21: Below-the-Hook Lifting DevicesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to devices other than slings for attaching loads to hoists, and include vacuum lifting... Read MoreTT $74.00
TTS 426/3. 1993-07-27Crane Code: Part 3: JacksMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of general... Read MoreTT $94.00
TTS 426/4. 1993-07-27Crane Code: Part 4: Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)Mechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of overhead and... Read MoreTT $135.00
TTS 426/6. 1993-07-27Crane Code: Part 6: Portal, Tower, and Pillar CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, operation, inspection, and maintenance of portal, tower,... Read MoreTT $94.00
TTS 426/7. 1993-07-27Crane Code: Part 7: Mobile and Locomotive CranesMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $135.00
TTS 426/8. 1993-07-27Crane Code : Part 8: DerricksMechanical Equipment and Packaging1993VoluntaryWithdrawnThis standard applies to the construction, installation, operation, inspection, and maintenance of... Read MoreTT $94.00
TTS 426/9. 1993-07-27Crane Code: Part 9: Base Mounted Drum HoistsMechanical Equipment and Packaging1993VoluntaryWithdrawnApplies to the construction, installation, inspection, operation and maintenance of base mounted... Read MoreTT $135.00
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 428/1. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 1: Evaluation of Friction Material Characteristics - Small Sample Bench Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnEstablishes uniform laboratory procedures for securing and reporting the friction and wear... Read MoreTT $47.00
TTS 428/2. 1993Methods of Test For Road Vehicle Brake Linings and Disc Pads: Part 2: Shear Strength of Disc Pads and Brake Shoe Assemblies - Test ProceduresMechanical Equipment and Packaging1993VoluntaryWithdrawnDescribes a method for measuring the shear strength of disc brake pad and drum brake shoe... Read MoreTT $34.00
TTS 428/3. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 3: Compressibility Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of testing and measuring the compressibility of brake liningsTT $34.00
TTS 428/4. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 4: Internal Shear Strength of Lining Material - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring the internal shear strength (stress) of brake lining materialsTT $34.00
TTS 428/5. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 5: Effects of Heat on Dimensions and Form of Disc Pads - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a method of measuring disc brake pads to determine their dimensional changes in relation... Read MoreTT $34.00
TTS 428/6. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 6: Resistance to Water, Saline Solution, Oil and Brake Fluid - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for exposing samples to detrimental environments, measuring the... Read MoreTT $34.00
TTS 428/7. 1993Methods of Test for Road Vehicle Brake Linings and Disc Pads: Part 7: Seizure to Ferrous Mating Surface Due to Corrosion - Test ProcedureMechanical Equipment and Packaging1993VoluntaryWithdrawnSpecifies a laboratory method for conditioning brake linings in an environment that will promote... Read MoreTT $34.00
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 461: Part 2:2005Polyethylene Garbage Bags - Specification - Part 2 - High DensityMechanical Equipment and Packaging2005VoluntaryWithdrawnThis standard specifies requirements for high density polyethylene garbage bags which are normally... Read MoreTT $96.00 + VATReplaced by: TTS 645:2018
TTS 461:Part 1:1993Polyethylene (Polythene) Garbage Bags - Part 1: Low DensityMechanical Equipment and Packaging1993VoluntaryWithdrawnThese requirements for garbage bags for domestic and commercial use, produced from low density... Read More$74.00
TTS 510. 1994Specification for Seat Belt Booster CushionsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for seat belt booster cushions that are for use with a lap... Read MoreTT$94.00
TTS 511. 1995Specification for Rearward-Facing Restraining Devices for Infants for Use in Road VehiclesMechanical Equipment and Packaging1995VoluntaryWithdrawnThis standard specifies requirements for rearward-facing infant restraint systems, that are for use... Read MoreTT$74.00
TTS 512. 1994Specification for Carry Cot RestraintsMechanical Equipment and Packaging1994VoluntaryWithdrawnThis standard specifies requirements for restraining devices for separate use by child occupants of... Read MoreTT$74.00
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 601:2007Plastic Chairs - Performance RequirementsMechanical Equipment and Packaging2007CompulsoryWithdrawnThese requirements establish nationally recognized performance requirements for Class A... Read MoreTT $200.00
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/ISO 3394:2008Dimensions of Rigid Rectangular Packages - Transport PackagesMechanical Equipment and Packaging2008VoluntaryWithdrawnSets forth a series of dimensions for rigid rectangular transport packages based on the standard... Read MoreTT $250.00
TTS/ISO 3676:2008Packaging - Unit Load Sizes - DimensionsMechanical Equipment and Packaging2008VoluntaryWithdrawnBased on the concept of a modular system and specifies the plan dimensions for unit loads suitable... Read MoreTT $200.00
TTS/ISO 4178:2008Complete, Filled Transport Packages - Distribution Trials - Information to be RecordedMechanical Equipment and Packaging2008VoluntaryWithdrawnSpecifies the information to be recorded when carrying out distribution trials involving complete,... Read MoreTT $200.00
TTS/ISO 4180-1:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 1: General PrinciplesMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $560.00
TTS/ISO 4180-2:2008Complete, Filled Transport Packages - General Rules for the Compilation of Performance Test Schedules - Part 2: Quantitative DataMechanical Equipment and Packaging2008VoluntaryWithdrawnEstablishes general rules to be used for the compilation of performance test schedules for... Read MoreTT $559.00
TTS/ISO 6590:PART 1:2009Packaging - Sacks - Vocabulary and Types - Part 1: Paper SacksMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 6590 defines terms commonly used in paper sack manufacture. It refers to single... Read MoreTT $587.00
TTS/ISO 780:2009Packaging - Pictorial Marking for Handling of GoodsMechanical Equipment and Packaging2009VoluntaryWithdrawnSpecifies a set of symbols conventionally used for marking of transport packages in their physical... Read MoreTT $420.00
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO 90-2:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines general use containers, types of container, cross-sections,... Read MoreTT $640.00
TTS/ISO 90-3:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol CansMechanical Equipment and Packaging2009VoluntaryWithdrawnThis part of ISO 90 defines the diameters, apertures, constructions, shapes and capacities of... Read MoreTT $457.00
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
Metrology
TTS 31 05 402. 1983SI Units and Recommendations for the Use of their Multiples and of Certain Other UnitsMetrology1983VoluntaryWithdrawnDescribes the International System of Units, recommends selected decimal multiples and... Read MoreTT$34.00
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 31 20 000. 1991Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology1991VoluntaryWithdrawnDefines three types of standard atmosphereTT $34.00
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 31 20 501. 1991Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology1991VoluntaryWithdrawnGives specifications for three types of standard atmosphereTT $34.00
TTS 31 20 503. 1991Preferred Test TemperaturesMetrology1991VoluntaryWithdrawnSpecifies preferred temperatures for use in testingTT $34.00
TTS/ISO 1000: 2009SI Units and Recommendations for the use of their Multiples and of Certain Other Units (Including Amendment 1)Metrology2009VoluntaryWithdrawnDescribes the International System of Units ( in clauses 3, 4 and 6); recommends selected decimal... Read MoreTT $625.00
TTS/ISO 3205:2009Preferred Test TemperaturesMetrology2009VoluntaryWithdrawnThe aim is the rationalize, harmonize and simplify the choice of temperatures in the future. In... Read MoreTT $200.00
TTS/ISO 554:2009Standard Atmospheres for Conditioning and/or Testing - SpecificationsMetrology2009VoluntaryWithdrawnLays down three standard atmospheres for conditioning and/or testing which are not very different... Read MoreTT $200.00
TTS/ISO 558:2009 Conditioning and Testing - Standard Atmospheres - DefinitionsMetrology2009VoluntaryWithdrawnDefines three types of standard atmosphereTT $200.00
Petroleum and Energy
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
Quality
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 9000:2008Quality Management Systems - Fundamentals and VocabularyQuality2008VoluntaryWithdrawnDescribes fundamentals of quality management systems, which form the subject of the ISO family, and... Read MoreAvailable on requestStatus under review
TTS/ISO 9001:2009Quality Management Systems - RequirementsQuality2009VoluntaryWithdrawnSpecifies requirements for a quality management system when an organization (a) needs to... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 43-1:2008Proficiency Testing by Interlaboratory Comparisons - Part 1: Development and Operation of Proficiency Testing SchemesQuality2008VoluntaryWithdrawnWhile there are a number of uses of interlaboratory comparisons, and variations in their design and... Read MoreTT $455.00
TTS/ISO/IEC GUIDE 43-2:2008Proficiency Testing by Interlaboratory Comparisons - Part 2: Selection and Use of Proficiency Testing Schemes by Laboratory Accreditation BodiesQuality2008VoluntaryWithdrawnThe objectives of this part of ISO/IEC Guide 43 are: a) to establish principles for the selection... Read MoreTT $200.00
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
Renewable energy systems
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
Social Responsibility
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
Societal Security
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
Technical Drawings
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Dr