Search Results


Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
2019
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
2018
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
2017
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
2016
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
2015
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
2014
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
2013
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
2012
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
2011
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
2010
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
2009
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
2008
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
2007
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
2006
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
2005
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
2002
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
2001
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
1999
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
1998
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
1997
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
1995
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
1994
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
1993
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
1992
TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
1991
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
1988
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
1987
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
1986
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
1985
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
1984
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
1980
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
1979
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
1978
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
1976
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Agriculture
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
Chemistry
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
Cocoa
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
Construction Codes
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
Construction Products
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
Consumer Products
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
Electrical Codes
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
Electrical Products
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Environment
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
Food technology
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
Funeral homes
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
Generalities
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
Health and Safety
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
Mechanical Equipment and Packaging
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
Metrology
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
Petroleum and Energy
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
Quality
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
Renewable energy systems
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
Social Responsibility
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
Societal Security
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
Technical Drawings
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
Telecommunications
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
Textiles
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
Tourism
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Compulsory
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 250:2009Household Refrigerators and FreezersElectrical Products2009CompulsoryCurrentThis Standard applies to self-contained household refrigerators and freezers designed to be... Read MoreAvailable on request
TTS/UL 489:2012Molded-Case Circuit Breakers, Molded-Case Switches and Circuit Breaker Enclosures (1st Revision)Electrical Products2012CompulsoryCurrentThe requirements of this standard cover molded-case circuit breakers, circuit breaker and... Read MoreAvailable on request
TTS/UL 498:2009Attachment Plugs and ReceptaclesElectrical Products2009CompulsoryCurrentThese requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps... Read MoreAvailable on request
TTS/UL 507: 2009Electric FansElectrical Products2009CompulsoryCurrentThese requirements cover: Fans and blowers that circulate air, such as desk, ceiling-suspended, and... Read MoreAvailable on request
TTS/UL 588: 2008Seasonal and Holiday Decorative ProductsElectrical Products2008CompulsoryCurrentThese requirements cover temporary - use, seasonal decorative - lighting products and accessories... Read MoreAvailable on request
TTS/UL 62: 2008Flexible Cords and CablesElectrical Products2008CompulsoryCurrentThis standard specifies the requirements for flexible cords, elevator cables, and hoistway cables,... Read MoreAvailable on request
TTS/UL 696:2010Electric ToysElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-operated toys including miniatures of full-sized... Read MoreAvailable on request
TTS/UL 73: 2009Motor-Operated AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover motor-operated appliances to be employed in accordance with TTS 171: Part... Read MoreAvailable on request
TTS/UL 817: 2009Cord Sets and Power-Supply CordsElectrical Products2009CompulsoryCurrentThese requirements cover power-supply cords for use as supply connections for appliances in... Read MoreAvailable on request
TTS/UL 858: 2010Household Electric RangesElectrical Products2010CompulsoryCurrentThese requirements cover household cooking equipment that is floor or cabinet supported,... Read MoreAvailable on request
TTS/UL 859: 2010Household Electric Personal Grooming AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover electric personal grooming appliances intended for household use, such... Read MoreAvailable on request
TTS/UL 923: 2009Microwave Cooking AppliancesElectrical Products2009CompulsoryCurrentThese requirements cover household and commercial microwave cooking appliances operated in the... Read MoreAvailable on request
TTS/UL 935: 2009Fluorescent-Lamp BallastsElectrical Products2009CompulsoryCurrentThese requirements cover ballasts of the resistance, and electronic (high frequency) types for use... Read MoreAvailable on request
TTS/UL 943:2010Ground-Fault Circuit-InterruptersElectrical Products2010CompulsoryCurrentThis Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters... Read MoreAvailable on request
TTS/UL 961:2010Electric Hobby and Sports EquipmentElectrical Products2010CompulsoryCurrent1.1 These requirements cover electrically-powered hobby and sports equipment rated 250 volts or... Read MoreAvailable on request
TTS/UL 982: 2009Motor-Operated Household Food Preparing MachinesElectrical Products2009CompulsoryCurrentThese requirements cover household motor-operated food preparing machines and kitchen accessories... Read MoreAvailable on request
TTS/UL 984: 2008Hermetic Refrigerant Motor-CompressorsElectrical Products2008CompulsoryCurrent1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as... Read MoreAvailable on request
Voluntary
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 467:2019Grounding and Bonding EquipmentElectrical Products2019VoluntaryCurrentThis standard applies to grounding and bonding equipment for use in accordance with TTS 171: Part... Read MoreTT $280.00 + VAT
TTS/UL 510: 2008Polyvinyl Chloride, Polyethylene, and Rubber Insulating TapeElectrical Products2008VoluntaryCurrentCovers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and... Read MoreAvailable on request
TTS/UL 796: 2008Printed-Wiring BoardsElectrical Products2008VoluntaryCurrentThese requirements apply to rigid printed-wiring boards and flexible printed-wiring board for uses... Read MoreAvailable on request
Standards NumberStandards TitleSubject AreaYearType of StandardStatusScope of StandardPriceComments on this Standard
Current
TTS 625-2:2011Steel Nails - Part 2: Hardened Steel NailsConstruction Products2011CompulsoryCurrentThis Standard applies to hardened steel nails formed from drawn wire which has been hardened by... Read MoreTT $96.00 + VAT
TTS/IEC 60095-1:2014Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of TestElectrical Products2014CompulsoryCurrentThis Trinidad and Tobago Standard is applicable to lead-acid starter batteries with nominal... Read MoreTT $1,743.00 + VAT
TTS/ISO 22300:2014Societal Security - TerminologySocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard contains terms and definitions applicable to societal security to... Read MoreAvailable on request
TTCS 1:2018Sodium Hypochlorite Solution (Liquid Chlorine Bleach) - Compulsory RequirementsChemistry2018CompulsoryCurrentThis standard applies to sodium hypochlorite solution (liquid chlorine bleach) and outlines the... Read MoreTo obtain a copy of this standard email: ttbs@ttbs.org.ttSuperseded: TTS 58:2010
TTS 106:2012Solar Water Heater Systems - Design and Installation RequirementsRenewable energy systems2012VoluntaryCurrentThis standard specifies requirements for the design and installation of solar water heater systems... Read More TT $136.00 + VAT
TTS 16 40 000.1978Glossary of Timber Names for Use in Trinidad and TobagoConstruction Products1978VoluntaryCurrentGives the common and botanical names of various species or groups of species of indigenous and... Read MoreTT $96.00 + VAT
TTS 16 40 001.1987Glossary of Terms Relating to Timber and WoodworkConstruction Products1987VoluntaryCurrentDefines terms relating to timber and its utilization. Preferred terms are given first and... Read MoreTT $136.00 + VAT
TTS 16 80 400:1991Code of Practice for the Design and Construction of Septic Tanks and Associated Secondary Treatment and Disposal SystemsConstruction Codes1991VoluntaryCurrentGives recommendations for the design, location, construction and maintenance of septic tanks and... Read MoreTT $136.00 + VATTo review status
TTS 16 90 400: Part 4-1985Recommendations for the Design of Building: Plumbing and Drainage SystemsConstruction Codes1985VoluntaryCurrentOutlines practices, materials and fixtures to be used in the installation, maintenance, extensions... Read MoreTT $96.00 + VATTo be withdrawn upon approval of the National Plumbing Code
TTS 164:2011Architectural Coatings - General RequirementsChemistry2011CompulsoryCurrentThis standard prescribes general requirements for architectural coatings used in interior and... Read MoreTT $96.00 + VAT
TTS 165:2011Architectural Coatings - Solvent-Borne Paints - SpecificationChemistry2011VoluntaryCurrentThis standard prescribes requirements for solvent-borne architectural paints, for interior and... Read MoreTT $96.00 + VAT
TTS 166:2013Architectural Coatings - Water-Borne Paints - SpecificationChemistry2013VoluntaryCurrentThis standard prescribes requirements for water-borne paints, for interior and exterior... Read MoreTT $96.00 + VAT
TTS 171:Part 1:2015Trinidad and Tobago Electrical Wiring Code - Part 1: Low voltage installations (1st Revision)Electrical Codes2015VoluntaryCurrentThis standard specifies minimum requirements for the installation, inspection, testing and... Read MoreTT $280.00 + VAT
TTS 171:Part 2:2002Trinidad and Tobago Electrical Wiring Code - Part 2 - High Voltage InstallationsElectrical Codes2002VoluntaryCurrentSpecifies requirements for the installation, inspection, testing and maintenance of electrical... Read MoreTT $176.00 + VAT
TTS 171-3:2011Trinidad and Tobago Electrical Wiring Code - Part 3: Renewable Energy Systems and Interconnection RequirementsElectrical Codes2011VoluntaryCurrentThis standard specifies requirements for the following types of renewable energy systems: Solar... Read MoreTT $152.00 + VAT
TTS 174:2005Specification for Conductors in Insulated Cables and Cords (1st Revision)Electrical Products2005VoluntaryCurrentSpecifies requirements for aluminium and copper conductors in insulated wires and cordsTT $96.00 + VATTo be withdrawn shortly.
TTS 177:2005Tugsten Filament Lamps for General Service - Specification (2nd Revision)Electrical Products2005CompulsoryCurrentThis National Standard specifies the technical requirements and methods of test for vacuum or... Read MoreTT $96.00 + VAT
TTS 21 10 500:Part 12-1985Requirements for Labelling - Size Designation of GarmentsTextiles1985CompulsoryCurrentEstablishes a system of designating the size of garments.TT $96.00 + VATTo be reviewed shortly
TTS 21 10 501-1. 1979Requirements for Labelling - Labelling of Planting Material SeedsAgriculture1979VoluntaryCurrentProvides the information to be included on labels of seed packages and the method of display of... Read MoreTT $96.00 + VATTo review status shortly
TTS 21 10 505:Part 1:1980Requirements for the Marking and Labelling of Gas Cylinders - Industrial and Domestic Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for the marking and labelling of industrial and domestic gas cylinders for... Read MoreTT $96.00 + VAT
TTS 21 10 505:Part 2:1980 Requirements for the Marking and Labelling of Gas Cylinders - Medical Gas CylindersMechanical Equipment and Packaging1980VoluntaryCurrentSpecifies requirements for marking and labelling of medical gas cylinders for identification of... Read MoreTT $96.00 + VAT
TTS 21 40 000-1976Glossary of Terms Relating to the Conditioning and Testing of TextilesTextiles1976VoluntaryCurrentDefines terms used in conditioning and testing textile materialsTT $96.00 + VATTo be reviewed shortly
TTS 21 40 300-1: 1976Methods for the Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing PolyesterTextiles1976VoluntaryCurrentDescribes the procedure for the quantitative determination of binary mixtures of polyester and... Read MoreTT $96.00 + VAT
TTS 21 40 301:Part 4: 1988Textiles - Test for Colour Fastness - Colour Fastness to Dry CleaningTextiles1988VoluntaryCurrentSpecifies a method for determining the resistance of the colour of textiles of all kinds and in all... Read MoreTT $96.00 + VATTo review standard shortly
TTS 21 40 302-1980Requirements for Methods of Test for ThreadsTextiles1980VoluntaryCurrentDefines methods of test for all industrial and domestic sewing threads.TT $96.00 + VATTo be reviewed shortly
TTS 21 40 501 Part I-1980Specification for the Performance Requirements of Textile Fabrics - Raw Cotton Material for Household TextilesTextiles1980VoluntaryCurrentSpecifies requirements for one hundred percent cotton material to be used in the construction of... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 21 40 501: Part 2-1985Performance Requirements for Textile Fabrics - Fabrics for School Shirts, Blouses and SkirtsTextiles1985VoluntaryCurrentDefines performance requirements of woven fabrics for school skirts, blouses and shirts and... Read MoreTT $96.00 + VAT
TTS 21 60 400: 1980Code of Practice for the Construction of Children's GarmentsTextiles1980VoluntaryCurrentGives guidelines for the construction of garments made from fabrics woven from natural or man-made... Read MoreTT $96.00 + VAT
TTS 21 80 500-1986 Specification for Household MopsConsumer Products1986VoluntaryCurrentSpecifies requirements for the materials and construction of household mops manufactured from... Read MoreTT $96.00 + VATTo review status shortly
TTS 22-1:2012Requirements for Tourist Accommodation - Part 1: Hotels and Guesthouses (2nd Revision)Tourism2012VoluntaryCurrentThis National Standard specifies the minimum requirements for hotels and guesthouses operating in... Read MoreTT $136.00 + VAT
TTS 22-2:2014Requirements for Tourist Accommodation - Part 2: Bed & Breakfast and Self-Catering Facilities (1st Revision)Tourism2014VoluntaryCurrent1.1 This Trinidad and Tobago Standard provides the minimum requirements for Bed & Breakfast and... Read MoreTT $136.00 + VAT
TTS 22-3:2011Requirements for Tourist Accommodation - Part 3: VillasTourism2011VoluntaryCurrentThis Trinidad and Tobago Standard specifies the minimum requirements for villas which are leased or... Read MoreTT $136.00 + VAT
TTS 26 20 506. 1980Specification for Configurations of Plugs and Receptacles (Socket-Outlets)Electrical Products1980CompulsoryCurrentLays down twenty-three configurations of single-phase, general purpose, non-locking electrical... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 26 20 507. 1985Specification for Electrical Outlet BoxesElectrical Products1985VoluntaryCurrentSpecifies requirements for boxes made of metal or insulating material intending to contain one or... Read MoreTT $96.00 + VATTo be withdrawn shortly
TTS 26 20 513.1987Specification for Testing Zinc Coatings on Steel Wire and for Quality RequirementsConstruction Products1987VoluntaryCurrentSpecifies the methods of testing zinc coated steel wire products to determine the nominal mass of... Read MoreTT $96.00 + VAT
TTS 26 20 514. 1988Specification for Spark Testing of Electrical CablesElectrical Products1988VoluntaryCurrentSpecifies requirements and test methods for a.c and d.c spark testing of the insulation and sheath... Read MoreTT $96.00 + VATTo be withdrawn shortly.
TTS 266: 2002Pneumatic Tyres for Passenger Cars - SpecificationMechanical Equipment and Packaging2002CompulsoryCurrentApplies to new and used pneumatic passenger car tyres. It does not apply to retreaded or regrooved... Read MoreTT $136.00 + VAT
TTS 269:2007Unleaded Gasoline for Motor Vehicles - Specification (1st Revision)Petroleum and Energy2007CompulsoryCurrentSpecifies requirements and test methods for three grades of unleaded gasoline; Premium, Super and... Read MoreTT $96.00 + VAT
TTS 296:2008Tourist Land Transport Service Providers - Code of PracticeTourism2008VoluntaryCurrentThis Code of Practice gives guidelines for tourist land transport services in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 31 10 500:1988Rules for Rounding Off Numerical ValuesMetrology1988VoluntaryCurrentSpells out rules for the rounding off of numerical values.TT $96.00 + VAT
TTS 31 20 500-1978Specification for Atmospheric Conditions for TestingMetrology1978VoluntaryCurrentSpecifies atmospheric conditions for testing or performing measurements on materials, components,... Read MoreTT $96.00 + VAT
TTS 40:2012Pesticides - Classification (2nd Revision)Agriculture2012VoluntaryCurrentThis standard defines the criteria for the classification of pesticides including the pure... Read MoreTT $136.00 + VAT
TTS 41:2015Pesticides - Packaging - General RequirementsAgriculture2015VoluntaryCurrentThis standard establishes minimum requirements for packaging used for containment, protection and... Read MoreTT $96.00 + VAT
TTS 412:2015Steelpan - TerminologyTourism2015VoluntaryCurrentThis Standard defines common terms that are unique to the steelpan industry. It includes terms... Read MoreTT $136.00 + VAT

Replaces: TTS 412:1992

Click here to preview the standard before you buy it.

TTS 413:1992Specifications for Poly Vinyl Chloride (PVC) Solvent Cement for Use with Unplasticized PVC Pipes and Fittings for Cold Water ApplicationsMechanical Equipment and Packaging1992VoluntaryCurrentSpecifies the requirements for solvent cements for jointing unplasticized PVC pipes Available on requestTo be reviewed shortly and possibly withdrawn.
TTS 417:1993Specification for Liquid Effluent from Domestic Wastewater Treatment Plants into the EnvironmentEnvironment1994CompulsoryCurrentThis standard specifies the maximum permissible levels of the 5-day Biochemical Oxygen Demand... Read MoreTT $96.00 + VAT
TTS 418:1993 Specification for General Purpose Safety Footwear Other Than All-Rubber and All-Plastics Moulded TypesHealth and Safety1993CompulsoryCurrentThis Trinidad and Tobago Standard provides requirements and methods of test for general purpose... Read MoreTT $ 136.00 + VAT
TTS 419:1995Specification for Metatarsal Safety FootwearHealth and Safety1995CompulsoryCurrentThis Trinidad and Tobago Standard provides specifications, performance requirements and a method of... Read MoreTT $ 96.00 + VAT
TTS 427:1993Specification for Motor Vehicle Brake Linings and Disc PadsMechanical Equipment and Packaging1993CompulsoryCurrentThis standard specifies general requirements for friction material to be used in braking systems... Read MoreTT $96.00 + VATTo be reviewed shortly
TTS 429:1993Definitions of Terms Used in the Pneumatic Tyre IndustryMechanical Equipment and Packaging1993VoluntaryCurrentThis standard is a glossary which defines terms related to passenger car and commercial vehicle... Read MoreTT $94.00Status under review
TTS 430:1993Specification for Retreaded Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentGives inspection procedures for the tyre carcass before and during processing, repairing and... Read MoreTT $96.00 + VAT
TTS 431:1993Specification for Regrooved Pneumatic Passenger Car and Commercial Vehicle TyresMechanical Equipment and Packaging1993CompulsoryCurrentApplies to all regroovable and regrooved pneumatic passenger car and commercial vehicle tyres.TT $96.00 + VATTo be reviewed shortly
TTS 432:1993Code of Practice for the Storage of Tyres, Inner Tubes and FlapsMechanical Equipment and Packaging1993VoluntaryCurrentThis code of practice gives recommendations for storage of tyres, inner tubes and flaps. TT $96.00 + VATStatus under review
TTS 457:1994Child-Resistant Packaging - Requirements and Testing Procedures for Reclosable PackagesMechanical Equipment and Packaging1994VoluntaryCurrentSpecifies the requirements and test methods for reclosable packages designated as resistant to... Read MoreTT $96.00 + VATStatus under review
TTS 462: 1993Specification for Pressure Sensitive Adhesive Masking TapesConsumer Products1993VoluntaryCurrentThis specification applies to pressure sensitive adhesive masking tapes intended for use in... Read MoreTT $96.00 + VAT
TTS 463:1995Specification for Composition and Marking Requirements for Gold ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of gold articles, including... Read MoreTT $96.00 + VAT
TTS 464:1995 Specification for Composition and Marking Requirements for Silver ArticlesConsumer Products1995CompulsoryCurrentThis specification sets out the composition and marking requirements of silver articles, including... Read MoreTT $96.00 + VAT
TTS 466:2010Detergent - Synthetic Laundry Detergent Powder - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard provides the specification for synthetic laundry detergent powder , herein... Read MoreTT $96.00 + VAT
TTS 477:2013Safety Matches - Specification (2nd Revision)Consumer Products2013CompulsoryCurrentThis standard specifies minimum requirements for the dimensions, performance, sampling, testing,... Read MoreTT $96.00 + VAT
TTS 513:1995Seat Belt Assemblies for Road Vehicles Specification for Restraining Devices for ChildrenMechanical Equipment and Packaging1995VoluntaryCurrentThis standard specifies requirements for seat belt assemblies designed to restrain children riding... Read MoreTT $96.00 + VATTo review shortly
TTS 525:1999 Gas Cylinders - TerminologyMechanical Equipment and Packaging1999VoluntaryCurrentEstablishes the terminology used in the field of gas cylinders. Gives also definitions relating to... Read MoreTT $96.00 + VATTo review shortly
TTS 526:1997Periodic Inspection and Testing of Seamless Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard specifies the minimum requirements for periodic inspection and testing to verify the... Read MoreTT $136.00 + VATTo review shortly
TTS 527:1997Periodic Inspection and Testing of Welded Carbon Steel Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to welded carbon steel transportable gas cylinders intended for compressed,... Read MoreTT $136.00 + VATTo review shortly
TTS 528:1997Periodic Inspection and Testing of Seamless Aluminium-Alloy Gas CylindersMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to seamless aluminium-alloy transportable gas cylinders intended for... Read MoreTT $136.00 + VAT
TTS 529:1997Cylinders for Permanent Gases - Inspection at Time of FillingMechanical Equipment and Packaging1997VoluntaryCurrentThis standard applies to cylinders of water capacity from 0.5 litre to 150 litres for the... Read MoreTT $96.00 + VATTo review shortly
TTS 536:1997Specifications for New Pneumatic Tyres for Highway Commercial VehiclesMechanical Equipment and Packaging1997CompulsoryCurrentThis standard specifies physical dimensions, performance and marking requirements for pneumatic... Read MoreTT $96.00 + VATStatus under review
TTS 537:1997Code of Practice for Prevention of Damage to Hearing from Noise at WorkHealth and Safety1997VoluntaryCurrentThis code of practice prescribes measures that should be taken by employers and employed persons... Read MoreTT $136.00 + VATStatus under review
TTS 539:1997Code of Practice for Safety in Commercial Diving OperationsHealth and Safety1997VoluntaryCurrentThis standard is intended to provide for uniformity of practice throughout Trinidad and Tobago in... Read MoreTT $200.00 + VATStandard under revision
TTS 540:1998Requirements for Motor Vehicle Short-Term Rental OperationsTourism1998VoluntaryCurrentSpecifies requirements for motor vehicle short-term rental operations in Trinidad and Tobago.... Read MoreTT $96.00 + VAT
TTS 543:2002Specification for Toilet TissueConsumer Products2002CompulsoryCurrentSpecifies requirements for rolls of one ply and two ply toilet tissue. The standard also prescribes... Read MoreTT $96.00 + VAT
TTS 546:1998Standard on Allowable Transmittance Levels for Motor Vehicle WindowsMechanical Equipment and Packaging1998VoluntaryCurrentThis standard has been developed to address three main objectives. The first is to ensure a minimum... Read MoreTT $96.00 + VAT
TTS 547:1998Specification for the Effluent From Industrial Processes Discharged into the EnvironmentEnvironment1998VoluntaryCurrentThis standard specifies the permissible limits for key parameters of the effluent from point source... Read MoreTT $96.00 + VATTo be reviewed
TTS 551:1998Specification for Rotationally Moulded Polyethylene Water Storage TanksConstruction Products1998VoluntaryCurrentThis standard covers flat-bottomed water storage tanks of circular cross-section manufactured from... Read MoreTT $96.00 + VAT
TTS 560:2002Guide for Residential SecurityConstruction Codes2002VoluntaryCurrentContains guidance on security measures aimed at deterring intruders from entering dwellings, and at... Read MoreTT $248.00 + VAT
TTS 569:2011Automotive Diesel Fuel - Specification (2nd Revision)Petroleum and Energy2011CompulsoryCurrentThis standard specifies the properties and test methods for automotive diesel fuel intended for... Read MoreTT $96.00 + VAT
TTS 570:2002Specification for the Identification of the Contents of Pipelines, Piping, Ducts and ConduitsConstruction Products2002VoluntaryCurrentGives the minimum colour coding and labelling requirements for the identification of the contents... Read MoreTT $136.00 + VATTo review shortly
TTS 571:2014Recreational Dive - Requirements for Operation of FacilitiesTourism2014VoluntaryCurrentThis standard specifies minimum requirements for recreational SCUBA diving operations in Trinidad... Read MoreTT $96.00 + VAT
TTS 572:2010Aromatic Disinfectants - Quaternary Ammonium Compounds - SpecificationChemistry2010CompulsoryCurrentThe National Standard specifies requirements for aromatic disinfectant fluids containing quaternary... Read MoreTT $96.00 + VAT
TTS 574:2001 Automotive Engine OilPetroleum and Energy2001CompulsoryCurrentSpecifies requirements for automotive engine oils that are imported, produced, marketed and... Read MoreTT $96.00 + VATStatus under review
TTS 575:2010 Hand Dishwashing Detergent - Specification (1st Revision)Chemistry2010CompulsoryCurrentThis national standard specifies the chemical and physical requirements for detergents used for... Read MoreTT $136.00 + VAT
TTS 578:2019Guide to the Selection of Fabrics (1st Revision)Textiles2019VoluntaryCurrentThis National Standard provides guidelines for the selection of fabrics for varied uses including... Read MoreTT $176.00 + VATSuperseded: TTS 578:2001
TTS 579:2018Tour Guiding Services - Requirements (1st Revision)Tourism2018VoluntaryCurrentThis standard specifies minimum requirements for tour guiding services. Included are requirements... Read MoreTT $ 96.00 + VATSuperseded: TTS 579:2009
TTS 58:2018Liquid Chlorine Bleach (Sodium Hypochlorite Solution) - Specification (4th Revision)Chemistry2018VoluntaryCurrentThis standard specifies the requirements and test methods for scented and unscented sodium... Read MoreTT $ 96.00 + VATSuperseded: TTS 58:2010
TTS 580:2009Tour Operators - SpecificationTourism2009VoluntaryCurrentThis standard specifies acceptable practices to be followed by tour operators and is intended to be... Read MoreTT $96.00 + VATStatus under review
TTS 582:2010Recreational Spaces - CampingTourism2010VoluntaryCurrentThis Standard specifies the requirements for the operation, maintenance and the administration of a... Read MoreTT $96.00 + VAT
TTS 587:2005Hollow Clay Block - Vertical Core - SpecificationConstruction Products2005CompulsoryCurrentSpecifies requirements for vertical core, hollow building blocks, hereinafter called hollow blocks... Read MoreTT $96.00 + VAT
TTS 588:2015Hollow Clay Blocks - Horizontal Core - SpecificationConstruction Products2015CompulsoryCurrentThis standard specifies minimum requirements for horizontal core hollow clay blocks. It specifies... Read MoreTT $96.00 + VAT
TTS 59:2010Specification for Liquefied Petroleum Gases (LPG) (2nd Revision)Petroleum and Energy2010CompulsoryCurrentThis standard specifies the requirements for the composition, sampling and testing methods for the... Read MoreTT $96.00 + VAT
TTS 590:2011Refined Trinidad Lake Asphalt (TLA) - Specification (1st Revision)Construction Products2011VoluntaryCurrentThis standard specifies the physical properties of refined Trinidad Lake Asphalt (TLA) which has... Read MoreTT $96.00 + VAT
TTS 594:2007Requirements For Testing And Calibration Laboratories - Laboratory Quality Improvement Programme (LABQUIP) - Grade 1Quality2007VoluntaryCurrentThis national standard specifies the general requirements for the competence to carry out tests... Read MoreTT $96.00 + VAT
TTS 595:2005Aggregates for Concrete - SpecificationConsumer Products2005VoluntaryCurrentDefines the requirements for grading and quality of fine and coarse aggregate (other than... Read MoreTT $96.00 + VAT
TTS 598:2012Cold Formed Steel Framing Members for Structural Applications - SpecificationConstruction Products2012CompulsoryCurrentThis standard specifies requirements for cold formed steel framing members for use in structural... Read MoreTT $136.00 + VAT
TTS 599:2006Guide to the Design and Construction of Small BuildingsConstruction Codes2006VoluntaryCurrent1.1 This standard provides guidelines and establishes minimum requirements for the design and... Read MoreTT $280.00 + VATUnder revision
TTS 6 15 500:1976Specification for Ammonium Sulphate - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for ammonium sulphate (sulphate of ammonia, fertilizer... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 501:1976Specification for Urea - Fertilizer GradeAgriculture1976VoluntaryCurrentSpecifies requirements and methods of test for urea, fertilizer grade.TT $96.00 + VATTo review status shortly
TTS 6 15 502:1979Specification for Muriate of Potash (Potassium Chloride) Fertilizer Grade and Sulphate of Potash (Potassium Sulphate) Fertilizer GradeAgriculture1979VoluntaryCurrentSpecifies the requirements and methods of test for muriate of potash (potassium chloride) and... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 503:1979Specification for Single Superphosphate and Triple Superphosphate FertilizersAgriculture1979VoluntaryCurrentSpecifies the labelling and marking requirements for package of phosphate fertilizers. Includes... Read MoreTT $96.00 + VATTo review status shortly
TTS 6 15 505-1984Specification for Compound Fertilizers (Solid)Agriculture1984VoluntaryCurrentSpecifies the composition and labelling requirements of compound fertilizers.TT $96.00 + VATTo review status shortly
TTS 6 20 500-1978Specification for Mosquito CoilConsumer Products1978VoluntaryCurrentSpecifies requirements, sampling, test methods, labelling and packaging of mosquito coils... Read MoreTT $96.00 + VAT
TTS 602:2008Code of Practice for the Inspection of Pre-Owned Passenger VehiclesMechanical Equipment and Packaging2008VoluntaryCurrentThis national standard specifies inspection requirements for pre-owned passenger vehicles offered... Read MoreTT $136.00 + VAT
TTS 603:2007Wireless Devices - Short Range - SpecificationTelecommunications2007VoluntaryCurrentThis National Standard defines the minimum requirements for Short Range Device transmitters and... Read MoreTT $96.00 + VAT
TTS 604:2007Cordless Telephone Systems - SpecificationTelecommunications2007VoluntaryCurrentThis national standard defines the technical requirements for operating cordless telephone systems,... Read MoreTT $96.00 + VAT
TTS 605: Part 1: 2008Transmitters - Part 1: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - SpecificationTelecommunications2008VoluntaryCurrentThis Trinidad and Tobago Standard covers performance requirements for Very High Frequency (VHF)... Read MoreTT $136.00 + VAT
TTS 605:PART 2:2009Transmitters - Part 2: Very High Frequency (VHF) - Frequency Modulation (FM) Sound Broadcasting - Electromagnetic Compatibility (EMC) - SpecificationTelecommunications2009VoluntaryCurrentThis Trinidad and Tobago contains the requirements for Very High Frequency (VHF) Frequency... Read MoreTT $96.00 + VAT
TTS 606:2010Very Small Aperture Terminal (VSAT) - SpecificationTelecommunications2010VoluntaryCurrentThis standard specifies the characteristics of transmit-only and transmit-and-receive Very Small... Read MoreTT $96.00 + VAT
TTS 611:2008Workplace Design - Lighting of Indoor Workplaces - SpecificationHealth and Safety2008VoluntaryCurrentSpecifies the requirements for lighting of indoor workplaces, libraries and offices. It also... Read MoreTT $96.00 + VAT
TTS 612:2008PPE - Industrial Safety Helmets - SpecificationHealth and Safety2008VoluntaryCurrentThis standard contains specifications for industrial safety helmets that are manufactured, imported... Read MoreTT $96.00 + VAT
TTS 620:2008Occupational Safety and Health Risk Assessment - RequirementsHealth and Safety2008VoluntaryCurrentThis standard provides the basic requirements for conducting occupational safety and health risk... Read MoreTT $136.00 + VAT
TTS 621:2007Requirements for Contractor Safety Management SystemHealth and Safety2007VoluntaryCurrentThis standard gives detail of accepted safe industrial practices and outlines the minimum safety... Read MoreTT $96.00 + VAT
TTS 622:2009Dry - Barrel Fire Hydrants - SpecificationMechanical Equipment and Packaging2009VoluntaryCurrentSpecifies the minimum requirements for Class A dry-barrel fire hydrants with compression shut-off... Read MoreTT $96.00 + VAT
TTS 623:2011Requirements for Work at HeightHealth and Safety2011VoluntaryCurrentThis standard establishes health and safety requirements with respect to work at height where there... Read MoreTT $152.00 + VAT
TTS 625:2013Garment Construction - Requirements (1st Revision)Textiles2013VoluntaryCurrentThe standard specifies requirements for garment construction. It includes requirements for various... Read MoreTT $96.00 + VAT
TTS 625-1:2012Steel Nails - Part 1: General RequirementsConstruction Products2012VoluntaryCurrentThis standard specifies requirements for ordinary steel nails formed from drawn wire. Included are... Read MoreTT $96.00 + VAT
TTS 626:2013Good Management Practices for Micro, Small and Medium Enterprises - RequirementsQuality2013VoluntaryCurrentThis standard specifies requirements for an integrated quality, environmental and occupational... Read MoreTT $96.00 + VAT
TTS 629:2014Electric Cables - Thermosetting Insulated, Non-Armoured Cables with a Voltage Of 600/1000 V, for Fixed Installations - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies requirements for the construction and performance of non-armoured electric... Read MoreTT $96.00 + VAT
TTS 631:2014Funeral Homes - VocabularyFuneral homes2014VoluntaryCurrentThis standard defines terms relating to the funeral service industry. The terms are grouped... Read MoreTT $96.00 + VAT
TTS 632:2014Funeral Homes - Facilities and Services - RequirementsFuneral homes2014VoluntaryCurrentThis standard establishes requirements for funeral home operations. Included are requirements for... Read MoreTT $136.00 + VAT
TTS 637-1:2017Sites and Attractions - Part 1: General Requirements Tourism2017VoluntaryCurrent1.1 This standard specifies minimum requirements for the operations of tourist attractions that are... Read MoreTT $ 96.00 + VAT
TTS 637-2:2015Sites and Attractions - Part 2: Requirements for Tourist Information OfficesTourism2015VoluntaryCurrentThis standard specifies minimum requirements for the operations of, and services provided by... Read MoreTT $96.00 + VAT
TTS 638:2015Trade Effluent Discharges into Public Sewerage Systems - RequirementsEnvironment2015VoluntaryCurrentThis standard specifies maximum limits for key parameters of trade effluents that are intended for... Read MoreTT $96.00 + VAT
TTS 639:2014Electric Cables - PVC Insulated and PVC Sheathed Cables for Voltages up to and Including 300/500 V, for Electric Power and Lighting - SpecificationElectrical Products2014CompulsoryCurrentThis standard specifies a) requirements for non-armoured electric cables that: i) have a... Read MoreTT $96.00 + VAT
TTS 641:2017Driveway Gates - SpecificationConstruction Codes2017VoluntaryCurrentThis standard specifies minimum requirements for driveway gates used primarily to control vehicular... Read MoreTT $ 136.00 + VAT
TTS 642:2018Good Manufacturing Practices (GMP) for the Food Industry - Requirements Food technology2018VoluntaryCurrentThis standard establishes minimum requirements for a food safety and quality system in food... Read MoreTT $ 152.00 + VAT
TTS 645:2018High Density Polyethylene Garbage Bags - SpecificationMechanical Equipment and Packaging2018VoluntaryCurrentThis standard specifies the minimum requirements for garbage bags, manufactured from high density... Read MoreTT $ 96.00 + VATSuperseded: TTS 461:Part 2:2005
TTS 646:2019 Cocoa Beans - Sampling (ISO 2292:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies general conditions related to sampling for the determination of the quality... Read MoreTT $96.00 + VAT
TTS 647:2019Cocoa Beans - Specification and Quality Requirements (ISO 2451:2017, MOD)Cocoa2019VoluntaryCurrentThis document specifies the requirements, classification, sampling, test methods, packaging and... Read MoreTT $176.00 + VAT
TTS 69:2012Steel Sheets - Zinc and Aluminium-Zinc Alloy Coated - Profiled for Roofing and General Purposes - Specification (1st Revision)Construction Products2012CompulsoryCurrentThis standard specifies minimum requirements for profiled steel sheets coated with zinc or... Read MoreTT $136.00 + VAT
TTS 76: Part 13:2016Requirements for Labelling - Part 13: Labelling of Electrical Appliances (3rd Revision)Electrical Products2016CompulsoryCurrentThis National Standard specifies labelling requirements for all electrical appliances produced,... Read MoreTT $96.00 + VAT
TTS 76: Part 18:2005Requirements for Labelling - Part 18: Labelling of PlywoodConstruction Products2005CompulsoryCurrentThis Standard specifies minimum requirements for the labelling of plywood panels. It applies to... Read MoreTT $96.00 + VAT
TTS 76: Part 2: 1994Requirements for Labelling - Part 2: Labelling of Prepackaged GoodsConsumer Products1994CompulsoryCurrentThis standard prescribes requirements for the information to be provided on labels of goods... Read MoreTT $96.00 + VAT
TTS 76:PART 1:2006Requirements for Labelling - Part 1: General Principles (2nd Revision)Consumer Products2006CompulsoryCurrentThis standard provides general principles for labelling of all goods, which are customarily... Read MoreTT $96.00 + VAT
TTS 76:Part 11:1995Requirements for Labelling Part 11 - Labelling of Retail Packages of CigarettesConsumer Products1995CompulsoryCurrentThis standard specifies the information, the method of display of such information, and the wording... Read MoreTT $96.00 + VAT
TTS 76:Part 15:2005Requirements for Labelling - Part 15: Labelling of General Household and Automotive Cleaning Chemicals (1st Revision)Chemistry2005CompulsoryCurrentSpecifies the information to be included on labels of household and automotive cleaning chemicals,... Read MoreTT $96.00 + VATStatus under review
TTS 76:PART 20:2015Requirements for Labelling - Part 20: Labelling of Refrigerant ContainersMechanical Equipment and Packaging2015CompulsoryCurrentThis National Standard specifies the labelling requirements for: a) re-fillable and non-refillable... Read MoreTT $96.00 + VAT
TTS 76:PART 3:2007Requirements for Labelling - Part 3: Labelling of Garments (2nd Revision)Textiles2007CompulsoryCurrentApplies to the labelling of all garments offered for sale in Trinidad and Tobago. It is applicable... Read MoreTT $96.00 + VAT
TTS 76:PART 7:2008Textiles - Labelling and Advertising - Requirements (1st Revision)Textiles2008VoluntaryCurrentThis standard prescribes the requirements for the labelling and advertising of textiles and certain... Read MoreTT $96.00 + VAT
TTS 76:PART 8:2011Requirements for Labelling - Part 8: Labelling of Retail Packages of Pesticides (2nd Revision)Agriculture2011VoluntaryCurrentThis standard specifies the information to be included on labels of pesticide packages intended for... Read MoreTT $136.00 + VAT
TTS 76:PART 9:2008Labelling - Part 9: Footwear - RequirementsTextiles2008CompulsoryCurrentThis standard applies to the labelling of all footwear whether new, used or seconds, that are... Read MoreTT $96.00 + VAT
TTS 76-19:2012Requirements for Labelling - Part 19: Labelling of Fertilizers (1st Revision)Agriculture2012CompulsoryCurrentThis standard sets out requirements for the labels of any pre-packed substance that is... Read MoreTT $96.00 + VAT
TTS 94-1:2017Advertising - Part 1: General Requirements (3rd Revision)Consumer Products2017VoluntaryCurrentThis standard specifies requirements for the content and presentation of advertisements that are... Read MoreTT $ 96.00 + VAT
TTS 94-2:2010Requirements for Advertising - Part 2 - Advertising to ChildrenConsumer Products2010VoluntaryCurrentThis standard sets out requirements for the contents of advertising directed to children, shown or... Read MoreTT $96.00 + VAT
TTS/ANSI/ ISEA Z87.1:2011Standard for Occupational and Educational Personal Eye and Face Protection DevicesHealth and Safety2011VoluntaryCurrentThis standard sets forth criteria related to the general requirements, testing, permanent marking,... Read MoreAvailable on request
TTS/ANSI/BIFMA X 5.1:2005General - Purpose Office Chairs - TestsMechanical Equipment and Packaging2005VoluntaryCurrentThis standard is intended to provide manufacturers, specifiers, and users with a common basis for... Read MoreAvailable on request
TTS/ANSI/UL 569:2011Pigtails and Flexible Hose Connectors for LP-GasMechanical Equipment and Packaging2011CompulsoryCurrentThis standard applies to flexible hoses with a rated pressure of not less than 1.7 MPa (250 psig),... Read MoreAvailable on request
TTS/ASTM A 615M:2010Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain carbon-steel bars for concrete reinforcement in cut... Read MoreAvailable on request.
TTS/ASTM A706M:2010Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementConstruction Products2010CompulsoryCurrentThis specification covers deformed and plain low-alloy steel bars in cut lengths or coils for... Read MoreAvailable on request
TTS/ASTM C90:2010 Standard Specification for Loadbearing Concrete Masonry UnitsConstruction Products2010CompulsoryCurrent1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from... Read MoreAvailable on request.
TTS/ASTM D 6626:2002Standard Specification for Graded Trinidad Lake Modified Asphalt BinderConstruction Products2002VoluntaryCurrentCovers graded Trinidad Lake modified asphalt binders. Grading designations are related to the... Read MoreAvailable on request
TTS/ASTM D5710:2012Standard Specification for Trinidad Lake Modified AsphaltConstruction Products2012VoluntaryCurrent1.1 This specification covers Trinidad lake modified asphalt for use in construction of pavements.... Read MoreAvailable on request
TTS/ASTM F1561:2011Standard Performance Requirements for Plastic Chairs for Outdoor Use (1st Revision)Mechanical Equipment and Packaging2011CompulsoryCurrentThese requirements establish nationally recognized performance for Class A (residential) and Class... Read MoreAvailable on request
TTS/BS 4727-2:GROUP 08:2007Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms - Part 2: Terms Particular to Power Engineering - Group 08: Electric CablesElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5099:2007Electric Cables - Voltage Levels for Spark TestingElectrical Products2007VoluntaryCurrentThis Trinidad and Tobago Standard specifies voltage test levels for spark testing of insulation or... Read MoreAvailable on request
TTS/BS 5467:2012Electric Cables - Thermosetting Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 V (1st Revision)Electrical Products2012CompulsoryCurrentThis standard specifies requirements for construction and describes methods of test for armoured... Read MoreAvailable on request
TTS/BS 6143: Part 1: 2008Guide to the Economics of Quality - Part 1: Process Cost ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the modelling and determination of costs associated... Read MoreAvailable on request
TTS/BS 6143: Part 2: 2008Guide to the Economics Of Quality - Part 2: Prevention, Appraisal and Failure ModelQuality2008VoluntaryCurrentThis part of BS 6143 provides guidance on the determination of costs associated with defect... Read MoreAvailable on request
TTS/BS 6346: 2008Electric Cables - PVC Insulated, Armoured Cables for Voltages of 600/1000 V and 1900/3300 VElectrical Products2008CompulsoryCurrentSpecifies requirements for construction and describes methods of test for armoured cable with PVC... Read MoreAvailable on requestUnder review
TTS/BS 6500:2008Electric Cables - Flexible Cords Rated Up to 300/500 V for Use with Appliances and Equipment Intended for Domestic, Office and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/BS 7919:2008Electric Cables - Flexible Cables Rated Up to 450/750 V, for use with Appliances and Equipment Intended for Industrial and Similar EnvironmentsElectrical Products2008CompulsoryCurrentSpecifies requirements for the construction, dimensions and mechanical and electrical properties of... Read MoreAvailable on requestUnder review
TTS/CRS 54:2016Specification for CementConstruction Products2016CompulsoryCurrentThis standard specifies requirements for hydraulic cements used primarily in the construction... Read MoreTT $96.00 + VAT
TTS/CSA Z275.5:2010 Occupational Diver Training - SpecificationHealth and Safety2010VoluntaryCurrentThis Standard applies to occupational diver trainees, training organizations, instructors, and... Read MoreAvailable on request
TTS/EN 12975-1:2012Thermal Solar Systems and Components - Solar Collectors - Part 1: General RequirementsRenewable energy systems2012CompulsoryCurrentSpecifies requirements on durability (including mechanical strength), reliability and safety for... Read MoreAvailable on request
TTS/ICC/ANSI A117.1:2014Accessible and Usable Buildings and FacilitiesConstruction Codes2014VoluntaryCurrentThis standard provides technical criteria for making sites, facilities, buildings, and elements... Read MoreTT $280.00 + VAT
TTS/IEC 60063:2008Preferred Number Series for Resistors and CapacitorsElectrical Products2008VoluntaryCurrentThe figures given in Table I and their decimal multiples are series of preferred values with their... Read MoreAvailable on request
TTS/IEC 60335-2-101:2010Household and Similar Electrical Appliances - Safety - Part 2-101: Particular Requirements for VapourizersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric vaporizers for household and... Read MoreAvailable on Request
TTS/IEC 60335-2-3:2010Household and Similar Electrical Appliances - Safety - Part 2-3: Particular Requirements for Electric IronsElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric dry irons and steam irons,... Read MoreAvailable on Request
TTS/IEC 60335-2-35:2010Household and Similar Electrical Appliances - Safety - Part 2-35: Particular Requirements for Instantaneous Water HeatersElectrical Products2010CompulsoryCurrentThis Trinidad and Tobago Standard deals with the safety of electric instantaneous water heaters for... Read MoreAvailable on request
TTS/IEC 60335-2-76:2010Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electric Fence EnergizersElectrical Products2010VoluntaryCurrentThis Trinidad and Tobago Standard deals with the safety of electric fence energizers, the rated... Read MoreAvailable on requestTo be replaced shortly
TTS/IEC 60745-1: 2009Hand-Held Motor Operated Electric Tools - Safety - Part 1: General RequirementsElectrical Products2009CompulsoryCurrentThis part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven... Read MoreAvailable on request
TTS/IEC 60968:2014Self-Ballasted Lamps for General Lighting Services - Safety RequirementsElectrical Products2014CompulsoryCurrentThis standard specifies the safety and interchangeability requirements, together with the test... Read MoreAvailable on request
TTS/IEC 60969:2008Self-Ballasted Lamps for General Lighting Services - Performance RequirementsElectrical Products2008CompulsoryCurrentSpecifies the performance requirements together with the test methods and conditions required to... Read MoreAvailable on request
TTS/IEC/ISO 31010: 2010Risk Management - Risk Assessment TechniquesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard is a supporting standard for ISO 31000 and provides guidance in... Read MoreAvailable on request
TTS/ISO 10001:2008Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for OrganizationsQuality2008VoluntaryCurrentProvides guidance for planning, designing, developing, implementing, maintaining and improving... Read MoreAvailable on request
TTS/ISO 10002:2008Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in OrganizationsQuality2008VoluntaryCurrentProvides guidance on the process of complaints handling related to products within an organization,... Read MoreAvailable on requestStatus under review
TTS/ISO 10003:2008Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to OrganizationsQuality2008VoluntaryCurrentProvides guidance for an organization to plan, design, develop, operate, maintain and improve an... Read MoreAvailable on request
TTS/ISO 10005:2008Quality Management Systems - Guidelines for Quality PlansQuality2008VoluntaryCurrentProvides guidelines for the development, review, acceptance, application and revision of quality... Read MoreAvailable on request
TTS/ISO 10006:2008Quality Management Systems - Guidelines for Quality Management in ProjectsQuality2008VoluntaryCurrentGives guidance on the application of quality management in projects. It is applicable to projects... Read MoreAvailable on request
TTS/ISO 10012:2008Measurement Management Systems - Requirements for Measurement Processes and Measuring EquipmentQuality2008VoluntaryCurrentSpecifies generic requirements and provides guidance for the management of measurement processes... Read MoreAvailable on request
TTS/ISO 10014:2008Quality Management - Guidelines for Realizing Financial and Economic BenefitsQuality2008VoluntaryCurrentProvides guidelines for realizing financial and economic benefits from the application of the ISO... Read MoreAvailable on request
TTS/ISO 10015:2008Quality Management - Guidelines for TrainingQuality2008VoluntaryCurrentThese guidelines cover the development, implementation, maintenance, and improvement of strategies... Read MoreAvailable on request
TTS/ISO 10019:2008Guidelines for the Selection of Quality Management System Consultants and Use of their ServicesQuality2008VoluntaryCurrentProvides guidance for the selection of quality management system consultants and the use of their... Read MoreAvailable on request
TTS/ISO 10209-1:2008Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of DrawingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 10209 establishes and defines terms used in technical product documentation... Read MoreAvailable on request
TTS/ISO 105-B01: 2008Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light - DaylightTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method intended for determining the resistance of the colour of... Read MoreAvailable on request
TTS/ISO 105-C06:2008Textiles - Tests for Colour Fastness - Part C06: Colour Fastness to Domestic and Commercial LaunderingTextiles2008VoluntaryCurrentThis part of ISO 105 specifies methods intended for determining the resistance of the colour of... Read MoreTT $300.00
TTS/ISO 105-G01:2008Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen OxidesTextiles2008VoluntaryCurrentThis part of ISO 105 specifies two methods for determining the resistance of the colour of textiles... Read MoreAvailable on request
TTS/ISO 105-JO1:2008Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface ColourTextiles2008VoluntaryCurrentThis part of ISO 105 is designed as a reference document to support the proper measurement of the... Read MoreAvailable on request
TTS/ISO 105-N01: 2008Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: HypochloriteTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-P01:2008Textiles - Tests for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing)Textiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the resistance of the colour of textiles of... Read MoreAvailable on request
TTS/ISO 105-Z01:2008Textiles - Tests for Colour Fastness - Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium SaltsTextiles2008VoluntaryCurrentThis part of ISO 105 specifies a method for determining the effect, on the colour of a dye, of... Read MoreAvailable on request
TTS/ISO 1101:2008Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-OutTechnical Drawings2008VoluntaryCurrentContains basic information and gives requirements for the geometrical tolerancing of workpieces. It... Read MoreAvailable on request
TTS/ISO 11193-1:2009Single-Use Medical Examination Gloves - Part 1: Specification for Gloves Made from Rubber Latex or Rubber SolutionConsumer Products2009VoluntaryCurrentThis part of ISO 11193 specifics requirements for packaged sterile, or bulked non-sterile, rubber... Read MoreAvailable on request
TTS/ISO 11193-2:2008Single-Use Medical Examination Gloves - Part 2: Specification for Gloves Made from Poly (Vinyl Chloride)Consumer Products2009VoluntaryCurrentThis part of ISO 11193 specifies requirements for packaged sterile, or bulked non-sterile,... Read MoreAvailable on request
TTS/ISO 1130: 2008Textile Fibres - Some Methods of Sampling for TestingTextiles2008VoluntaryCurrentSpecifies several methods for preparing laboratory samples of fibres and presents a limited... Read MoreAvailable on request
TTS/ISO 128-1:2008Technical Drawings - General Principles of Presentation - Part 1: Introduction and IndexTechnical Drawings2008VoluntaryCurrentThis part of ISO 128 gives general rules for the execution of technical drawings, as well as... Read MoreAvailable on request
TTS/ISO 129-1:2008Technical Drawings - Indication of Dimensions and Tolerances - Part 1: General PrinciplesTechnical Drawings2008VoluntaryCurrentThis part of ISO 129 established the general principles of dimensioning applicable for all types of... Read MoreAvailable on request
TTS/ISO 1302:2008Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product DocumentationTechnical Drawings2008VoluntaryCurrentSpecifies the rules for the indication of surface texture in technical product documentation (e.g.... Read MoreAvailable on request
TTS/ISO 13934-1:2008Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip MethodTextiles2008VoluntaryCurrentSpecifies a procedure to determine the maximum force and elongation at maximum force of textile... Read MoreAvailable on request
TTS/ISO 13938-2:2008Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting DistensionTextiles2008VoluntaryCurrentThis standard describes a pneumatic pressure method for the determination of bursting strength and... Read MoreAvailable on request
TTS/ISO 14001:2015Environmental Management Systems - Requirements with guidance for useEnvironment2015VoluntaryCurrentThis standard specifies the requirements for an environmental management system that an... Read MoreAvailable on request
TTS/ISO 14004:2007Environmental Management Systems - General Guidelines on Principles, Systems and Support TechniquesEnvironment2007VoluntaryCurrentProvides guidance on the establishment, implementation, maintenance and improvement of an... Read MoreTT $735.00
TTS/ISO 14015:2010Environmental Management - Environmental Assessment of Sites and Organizations (EASO)Environment2010VoluntaryCurrentProvides guidance on how to conduct an EASO through a systematic process of identifying... Read MoreAvailable on request
TTS/ISO 14020:2002Environmental Labels and Declarations - General PrinciplesEnvironment2002VoluntaryCurrentEstablishes guiding principles for the development and use of environmental labels and... Read MoreAvailable on request
TTS/ISO 14021:2002Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)Environment2002VoluntaryCurrentSpecifies requirements for self-declared environmental claims, including statements, symbols and... Read MoreAvailable on request
TTS/ISO 14024:2002Environmental Labels and Declarations - Type I Environmental Labelling - Principles and ProceduresEnvironment2002VoluntaryCurrentEstablishes the principles and procedures for developing Type I environmental labelling programmes,... Read MoreAvailable on request
TTS/ISO 14025:2007Environmental Labels and Declarations - Type III Environmental Declarations - Principles and ProceduresEnvironment2007VoluntaryCurrentEstablishes the principles and specifies the procedures for developing Type III environmental... Read MoreAvailable on request
TTS/ISO 14031:2007Environmental Management - Environmental Performance Evaluation - GuidelinesEnvironment2007VoluntaryCurrentGives guidance on the design and use of environmental performance evaluation within an... Read MoreAvailable on request
TTS/ISO 14040:2007Environmental Management - Life Cycle Assessment - Principles and FrameworkEnvironment2007VoluntaryCurrentDescribes the principles and framework for life cycle assessment (LCA) including a) the goal and... Read MoreAvailable on request
TTS/ISO 14044:2007Environmental Management - Life Cycle Assessment - Requirements and GuidelinesEnvironment2007VoluntaryCurrentSpecifies requirements and provides guidelines for life cycle assessment (LCA) including: the goal... Read MoreAvailable on request
TTS/ISO 14050:2007Environmental Management - VocabularyEnvironment2007VoluntaryCurrentContains definitions of fundamental concepts related to environmental management, published in the... Read MoreAvailable on request
TTS/ISO 14063:2007Environmental Management - Environmental Communication - Guidelines and ExamplesEnvironment2007VoluntaryCurrentGives guidance to an organization on general principles, policy, strategy and activities relating... Read MoreAvailable on request
TTS/ISO 14064-1:2009Greenhouse Gases - Part 1: Specification with Guidance at the Organization Level for Quantification and Reporting of Greenhouse Gas Emissions and RemovalEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements at the organization level for... Read MoreAvailable on request
TTS/ISO 14064-2:2009Greenhouse Gases - Part 2: Specification With Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal EnhancementsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance at the project... Read MoreAvailable on request
TTS/ISO 14064-3:2009Greenhouse Gases - Part 3: Specification with Guidance for the Validation and Verification of Greenhouse Gas AssertionsEnvironment2009VoluntaryCurrentThis part of ISO 14064 specifies principles and requirements and provides guidance for those... Read MoreAvailable on request
TTS/ISO 15189:2008Medical Laboratories - Particular Requirements for Quality and CompetenceQuality2008VoluntaryCurrentSpecifies the requirements for quality and competence particular to medical laboratories. It is for... Read MoreAvailable on requestStatus under review
TTS/ISO 15190:2005Medical Laboratories - Requirements for SafetyQuality2005VoluntaryCurrentThis standard specifies requirements for safe practices in the medical laboratory. Available on request
TTS/ISO 1660:2008Technical Drawings - Dimensioning and Tolerancing of ProfilesTechnical Drawings2008VoluntaryCurrentDescribes the dimensioning and the geometrical tolerancing of profilied outlines and of profiled... Read MoreAvailable on request
TTS/ISO 1750:2010Common Names for Pesticides and other AgrochemicalsAgriculture2010VoluntaryCurrentThis Standard lists approved common names for certain pest control chemicals and plant growth... Read MoreAvailable on request.
TTS/ISO 1833-2: 2008Textiles - Quantitative Chemical Analysis - Part 2: Ternary Fibre MixturesTextiles2008VoluntaryCurrentThis part of ISO 1833 specifies methods of quantitative chemical analysis of various ternary... Read MoreAvailable on request
TTS/ISO 19011:2012Guidelines for Auditing Management SystemsQuality2012VoluntaryCurrentProvides guidance on auditing management systems, including the principles of auditing, managing an... Read MoreAvailable on request
TTS/ISO 20344:2011Personal Protective Equipment - Test Methods for FootwearHealth and Safety2011VoluntaryCurrentThis standard specifies methods for testing footwear designed as personal protective equipment.Available on request
TTS/ISO 20345:2011Personal Protective Equipment - Safety FootwearHealth and Safety2011VoluntaryCurrentISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear used for... Read MoreAvailable on request
TTS/ISO 2162-1:2008Technical Product Documentation - Springs - Part 1: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 2162 gives rules for the simplified representation of compression, extension,... Read MoreAvailable on request
TTS/ISO 2203:2008Technical Drawings - Conventional Representation of GearsTechnical Drawings2008VoluntaryCurrentEstablishes the conventional representation of the toothed portion of gears including worm gearing... Read MoreAvailable on request
TTS/ISO 22198:2008Textiles - Fabrics - Determination of Width and LengthTextiles2008VoluntaryCurrentSpecifies a method for the determination of length and width of textile fabrics that are in a... Read MoreAvailable on request
TTS/ISO 22301:2014Societal Security - Business Continuity Management Systems - RequirementsSocietal Security2014VoluntaryCurrentThis Trinidad and Tobago Standard for business continuity management specifies requirements to... Read MoreAvailable on request
TTS/ISO 2594:2008Building Drawings - Projection MethodsTechnical Drawings2008VoluntaryCurrentDefines two projection methods applying to building drawings, namely: - the direct orthographic... Read MoreAvailable on request
TTS/ISO 26000:2011Guidance on Social ResponsibilitySocial Responsibility2011VoluntaryCurrentThis International Standard provides guidance to all types of organizations, regardless of their... Read MoreAvailable on request
TTS/ISO 2859-1:2008Sampling Procedures for Inspection By Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) For Lot-By-Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is... Read MoreAvailable on request
TTS/ISO 2859-2:2008Sampling Procedures for Inspection by Attributes Part 2 Sampling plans indexed by Limiting Quality (LQ) for Isolated Lot InspectionQuality2008VoluntaryCurrentThis part of ISO 2859 establishes LQ sampling plans and procedures for inspection by attributes... Read MoreAvailable on request
TTS/ISO 2959:2008Textiles - Woven Fabric DescriptionsTextiles2008VoluntaryCurrentGives a number of characteristic parameters for woven fabrics and their constituents at various... Read MoreAvailable on request
TTS/ISO 3040:2008Technical Drawings - Dimensioning and Tolerancing - ConesTechnical Drawings2008VoluntaryCurrentEstablishes the definition of cones and specifies the graphical symbol to be used for their... Read MoreAvailable on request
TTS/ISO 31000:2010Risk Management - Principles and GuidelinesHealth and Safety2010VoluntaryCurrentThis Trinidad and Tobago Standard provides principles and generic guidelines on risk management.... Read MoreAvailable on request
TTS/ISO 3175-2:2008Textiles - Dry Cleaning and Finishing - Part 2: Procedures for TetrachloroetheneTextiles2008VoluntaryCurrentThis part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene),... Read MoreAvailable on request
TTS/ISO 3511 - 2: 2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 2: Extension of Basic RequirementsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 is an extension of part 1, which is limited to identification of instrument... Read MoreAvailable on request
TTS/ISO 3511 - 3:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 3: Detailed Symbols for Instrument Interconnection DiagramsTechnical Drawings2008VoluntaryCurrentThis part of ISO 3511 specifies instrument symbols for use on interconnection diagrams used for the... Read MoreAvailable on request
TTS/ISO 3511-1:2008Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 1: Basic RequirementsTechnical Drawings2008VoluntaryCurrentPart 1 of this standard establishes a symbols system for use in depicting the basic functions of... Read MoreAvailable on request
TTS/ISO 3511-4:2008Industrial Process Measurement Control Functions and Instrumentation - Symbolic Representation - Part 4: Basic Symbols For Process Computer, Interface and Shared Display/Control FunctionsTechnical Drawings2008VoluntaryCurrentThis symbols established in the part of ISO 3511 have been developed to be used in conjuction with... Read MoreAvailable on request
TTS/ISO 3534-1:2008Statistics - Vocabulary and Symbols - Part 1: General Statistical Terms and Terms Used in ProbabilityGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines general statistical terms and terms used in probability which may be... Read MoreAvailable on request
TTS/ISO 3534-2:2008Statistics - Vocabulary and Symbols - Part 2: Applied StatisticsGeneralities2008VoluntaryCurrentThis part of ISO 3534 defines applied statistics terms and expresses them in a conceptual framework... Read MoreAvailable on request
TTS/ISO 3633:2014Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and... Read MoreAvailable on request.
TTS/ISO 3758:2005Textiles - Care Labelling Code Using SymbolsTextiles2005VoluntaryCurrentThis standard establishes a system of graphic symbols, intended for use in the marking of textiles... Read MoreAvailable on request
TTS/ISO 3766:2008Construction Drawings - Simplified Representation of Concrete ReinforcementTechnical Drawings2008VoluntaryCurrentSpecifies the simplified representation and the characterization of reinforcement in reinforced and... Read MoreAvailable on request
TTS/ISO 3801:2008Textiles - Woven Fabrics - Determination of Mass Per Unit Length and Mass Per Unit AreaTextiles2008VoluntaryCurrentSpecifies methods for the determination of a) the mass per unit length, and b) the mass per unit... Read MoreAvailable on request
TTS/ISO 3951-1:2008Sampling Procedures for Inspection by Variables - Part 1: Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection for a Single Quality Characteristic and a Single AQLQuality2008VoluntaryCurrentThis part of ISO 3951 specifies an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 3951-2:2008Sampling Procedures for Inspection by Variables - Part 2: General Specification for Single Sampling Plans Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection of Independent Quality CharacteristicsQuality2008VoluntaryCurrentThis part of ISO 3951 specified an acceptance sampling system of single sampling plans for... Read MoreAvailable on requestStatus under review
TTS/ISO 406:2008Technical Drawings - Tolerancing of Linear and Angular DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the indication of tolerances for linear and angular dimensions on technical drawings.... Read MoreAvailable on request
TTS/ISO 4067 - 1:2008Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and DuctingTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for use on drawings and... Read MoreAvailable on request
TTS/ISO 4067 - 6:2008Technical Drawings - Installations - Part 6 - Graphical Symbols for Supply Water and Drainage Systems in the GroundTechnical Drawings2008VoluntaryCurrentThis part of ISO 4067 establishes conventional basic graphical symbols for conduits, pipes and... Read MoreAvailable on request
TTS/ISO 4067-2:2008Building and Civil Engineering Drawings - Installations - Part 2 - Simplified Representation of Sanitary AppliancesTechnical Drawings2008VoluntaryCurrentEstablishes simplified representations of sanitary appliances, for use on plans and diagrams of... Read MoreAvailable on request
TTS/ISO 4068:2008Building and Civil Engineering Drawings - Reference LinesTechnical Drawings2008VoluntaryCurrentSpecifies the representation of reference lines on building and civil engineering drawings of all... Read MoreAvailable on request
TTS/ISO 4157 - 1:2008Construction Drawings - Designation Systems - Part 1: Buildings and Parts of BuildingsTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems and a designation code for... Read MoreAvailable on request
TTS/ISO 4157-2:2008Construction Drawings - Designation Systems - Part 2: Room Names and NumbersTechnical Drawings2008VoluntaryCurrentThis part of ISO 4157 specifies requirements for designation systems for rooms, areas, spaces, and... Read MoreAvailable on request
TTS/ISO 4172:2008Technical Drawings - Construction Drawings - Drawings for the Assembly of Pre-Fabricated StructuresTechnical Drawings2008VoluntaryCurrentSpecifies general rules for the preparation of working drawings intended for the field assembly of... Read MoreAvailable on request
TTS/ISO 4435:2014Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U)Construction Products2014VoluntaryCurrentThis standard specifies the requirements for unplasticized poly(vinyl chloride) (PVC U) pipes,... Read MoreAvailable on request.
TTS/ISO 4880:2007 Burning Behaviour of Textiles and Textile Products - Vocabulary (1st Revision)Textiles2007VoluntaryCurrentDefines terms used in testing the burning behaviour of textiles and textile productsAvailable on request
TTS/ISO 4915:2007Textiles - Stitch Types - Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, designates, describes and illustrates the various kind of stitch types... Read MoreAvailable on request
TTS/ISO 4916:2007Textiles - Seam Types-Classification and Terminology (1st Revision)Textiles2007VoluntaryCurrentThis standard classifies, illustrates and designates, the various kinds of stitched seams. It is... Read MoreAvailable on request
TTS/ISO 50001:2012Energy Management Systems - Requirements with Guidance for UsePetroleum and Energy2012VoluntaryCurrentSpecifies requirements for establishing, implementing, maintaining and improving an energy... Read MoreAvailable on request
TTS/ISO 5077:2008Textiles - Determination of Dimensional Change in Washing and DryingTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change of fabrics, garments or other... Read MoreAvailable on request
TTS/ISO 5084:2008Textiles - Determination of Thickness of Textiles and Textile ProductsTextiles2008VoluntaryCurrentSpecifies a method for the determination of the thickness of textiles and textile products when... Read MoreAvailable on request
TTS/ISO 5089:2008Textiles - Preparation of Laboratory Test Samples and Test Specimens for Chemical TestingTextiles2008VoluntaryCurrentSpecifies methods of obtaining laboratory test samples of textile materials from laboratory bulk... Read MoreAvailable on request
TTS/ISO 5261:2008Technical Drawings - Simplified Representation of Bars and Profile SectionsTechnical Drawings2008VoluntaryCurrentSpecifies rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and... Read MoreAvailable on request
TTS/ISO 5455:2008Technical Drawings - ScalesTechnical Drawings2008VoluntaryCurrentSpecifies recommended scales and their designation for use on all technical drawings in any field... Read MoreAvailable on request
TTS/ISO 5457:2008Technical Product Documentation - Sizes and Layout of Drawing SheetsTechnical Drawings2008VoluntaryCurrentSpecifies the size and layout of preprinted sheets for technical drawings in any field of... Read MoreAvailable on request
TTS/ISO 5459:2008Technical Drawings - Geometrical Tolerancing - Datums and Datum-Systems for Geometrical TolerancesTechnical Drawings2008VoluntaryCurrentDescribes datum and datum-systems for geometrical tolerancing, their dimensions, practical... Read MoreAvailable on request
TTS/ISO 6330:2008Textiles - Domestic Washing and Drying Procedures for Textile TestingTextiles2008VoluntaryCurrentSpecifies domestic washing and drying procedures for textile testing. The procedures are applicable... Read MoreAvailable on request
TTS/ISO 6348:2008Textiles - Determination of Mass - VocabularyTextiles2008VoluntaryCurrentDefines the principal terms relating to the quantification of the mass of water and extractable... Read MoreAvailable on request
TTS/ISO 6410-1:2008Technical Drawings - Screw Threads and Threaded Parts - Part 1: General ConventionsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for representing screw threads and threaded parts on... Read MoreAvailable on request
TTS/ISO 6410-2:2008Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread InsertsTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 specifies methods for the representation of screw thread inserts on technical... Read MoreAvailable on request
TTS/ISO 6410-3:2008Technical Drawings - Screw Threads and Threaded Parts - Part 3: Simplified RepresentationTechnical Drawings2008VoluntaryCurrentThis part of ISO 6410 establishes rules for the simplified representation of threaded parts, with... Read MoreAvailable on request
TTS/ISO 6414:2008Technical Drawings for GlasswareTechnical Drawings2008VoluntaryCurrentEstablishes rules and conventions for particular use with drawings for technical glassware, for... Read MoreAvailable on request
TTS/ISO 6428:2008Technical Drawings - Requirements for MicrocopyingTechnical Drawings2008VoluntaryCurrentSpecifies the requirements to be observed when executing original technical drawings and other... Read MoreAvailable on request
TTS/ISO 6433:2008Technical Drawings - Item ReferencesTechnical Drawings2008VoluntaryCurrentGives general rules for the application and presentation of item references on technical drawings.... Read MoreAvailable on request
TTS/ISO 6486-1:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 6486-2:2009Ceramic Ware, Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic... Read MoreAvailable on request
TTS/ISO 675:2008Textiles - Woven Fabrics - Determination of Dimensional Change on Commercial Laundering Near the Boiling PointTextiles2008VoluntaryCurrentSpecifies a method for the determination of the dimensional change(shrinkage or stretch) of all... Read MoreAvailable on request
TTS/ISO 6938:2008Textiles - Natural Fibres - Generic Names and DefinitionsTextiles2008VoluntaryCurrentGives the generic names and the definitions of the most important natural fibres according to their... Read MoreAvailable on request
TTS/ISO 7000:2008Graphical Symbols for Use on Equipment - Index and SynopsisTechnical Drawings2008VoluntaryCurrentProvides a synopsis of those graphical symbols which are placed on equipment or parts of equipment... Read MoreAvailable on request
TTS/ISO 7001:2008Public Information SymbolsTechnical Drawings2008VoluntaryCurrentSpecifies graphical symbols for the purposes of public information. It is generally applicable to... Read MoreAvailable on request
TTS/ISO 7083:2008Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and DimensionsTechnical Drawings2008VoluntaryCurrentSpecifies the recommended proportions and lays down the dimensions for the symbols used to indicate... Read MoreAvailable on request
TTS/ISO 7086-1:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 1: Test MethodChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies a test method for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7086-2:2009Glass Hollowware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 7086 specifies permissible limits for the release of lead and cadmium from glass... Read MoreAvailable on request
TTS/ISO 7200:2008Technical Product Documentation - Data Fields in Title Blocks and Document HeadersTechnical Drawings2008VoluntaryCurrentSpecifies the data fields used in the title blocks and headers of technical product documents. Its... Read MoreAvailable on request
TTS/ISO 7211-1:2008Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 1 - Methods for the Presentation of a Weave Diagram and Plans for Drafting, Denting and LiftingTextiles2008VoluntaryCurrentThis part of ISO 7211 deals with recording of fabric weaves and makes provision for showing in... Read MoreAvailable on request
TTS/ISO 7211-2:2008Textiles - Woven Fabrics - Construction - Part 2 - Methods of Analysis - Determination of Number of Threads Per Unit LengthTextiles2008VoluntaryCurrentSpecifies three methods for the determination of the number of threads per centimetre in woven... Read MoreAvailable on request
TTS/ISO 7211-6: 2008Textiles - Woven Fabrics - Construction - Methods Of Analysis - Part 6 - Determination of the Mass of Warp and Weft Per Unit Area of FabricTextiles2008VoluntaryCurrentThis part of ISO 7211 specifies methods for determining the mass of the wrap and weft threads per... Read MoreAvailable on request
TTS/ISO 7573:2008Technical Drawings - Item ListsTechnical Drawings2008VoluntaryCurrentGives guidance and recommendations on the establishment of item lists for use with technical... Read MoreAvailable on request
TTS/ISO 7851:2010Fertilizers and Soil Conditioners - ClassificationAgriculture2010VoluntaryCurrentThis Standard establishes a classification system for fertilizers and soil conditioners. The... Read MoreAvailable on request
TTS/ISO 8:2008Documentation - Presentation of PeriodicalsGeneralities2008VoluntaryCurrentSets out rules intended to enable editors and publishers to present periodicals in a form which... Read MoreAvailable on request
TTS/ISO 80000 -1:2010Quantities and Units - Part 1: GeneralGeneralities2010VoluntaryCurrentISO 80000-1:2009 gives general information and definitions concerning quantities, systems of... Read MoreAvailable on request
TTS/ISO 80000-10:2010Quantities and Units - Parts 10: Atomic and Nuclear PhysicsGeneralities2010VoluntaryCurrentISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic... Read MoreAvailable on request
TTS/ISO 80000-11:2009Quantities and Units - Part 11: Characteristic NumbersGeneralities2009VoluntaryCurrentISO 80000-11 gives the names, symbols and definitions for characteristic numbers used in the... Read MoreAvailable on request
TTS/ISO 80000-12:2009Quantities and Units - Part 12: Solid State PhysicsGeneralities2009VoluntaryCurrentISO 80000-12 gives names, symbols and definitions for quantities and units of solid state physics.... Read MoreAvailable on request
TTS/ISO 80000-2:2010Quantities and Units - Part 2: Mathematical Signs and Symbols to be Used in the Natural Sciences and TechnologyGeneralities2010VoluntaryCurrentISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings,... Read MoreAvailable on request
TTS/ISO 80000-3:2008Quantities and Units - Part 3: Space and TimeGeneralities2008VoluntaryCurrentISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where... Read MoreAvailable on request
TTS/ISO 80000-4:2008Quantities and Units - Part 4: MechanicsGeneralities2008VoluntaryCurrentISO 80000-4 gives the names, symbols and definitions for quantities and units of classical... Read MoreAvailable on request
TTS/ISO 80000-5:2008Quantities and Units - Part 5: ThermodynamicsGeneralities2008VoluntaryCurrentISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where... Read MoreAvailable on request
TTS/ISO 80000-7:2009Quantities and Units - Part 7: LightGeneralities2009VoluntaryCurrentTTS/ISO 80000-7 gives names, symbols and definitions for quantities and units used for light and... Read MoreAvailable on request
TTS/ISO 80000-8:2008Quantities and Units - Part 8: AcousticsGeneralities2008VoluntaryCurrentISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where... Read MoreAvailable on request
TTS/ISO 80000-9:2009Quantities and Units - Part 9: Physical Chemistry and Molecular PhysicsGeneralities2009VoluntaryCurrentISO 80000-9 gives names, symbols, and definitions for quantities and units of physical chemistry... Read MoreAvailable on request
TTS/ISO 8015:2008Technical Drawings - Fundamental Tolerancing PrincipleTechnical Drawings2008VoluntaryCurrentSpecifies the principle of the relationship between dimensional (linear and angular) tolerances and... Read MoreAvailable on request
TTS/ISO 80416-2:2008Basic Principles for Graphical Symbols for Use on Equipment - Part 2 - Form and Use of ArrowsTechnical Drawings2008VoluntaryCurrentISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various... Read MoreAvailable on request
TTS/ISO 8048:2008Technical Drawings - Construction Drawings - Representation of Views, Sections and CutsTechnical Drawings2008VoluntaryCurrentLays down general rules for marking, designation, placing and orientation of views, sections and... Read MoreAvailable on request
TTS/ISO 8124-1:2010Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesConsumer Products2010CompulsoryCurrentThe requirements in ISO 8124 apply to all toys, i.e. any product or material designed or clearly... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-2:2010Safety of Toys - Part 2: FlammabilityConsumer Products2010CompulsoryCurrentThis part of ISO 8124 specifies the categories of flammable materials which are prohibited in all... Read MoreAvailable on requestStatus under review
TTS/ISO 8124-3:2010Safety of Toys - Part 3: Migration of Certain ElementsConsumer Products2010CompulsoryCurrentISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to... Read MoreAvailable on request
TTS/ISO 8124-4:2010Safety of Toys - Part 4: Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic UseConsumer Products2010VoluntaryCurrentDescribes requirements and test methods for activity toys for domestic family use intended for... Read MoreAvailable on requestStatus under review
TTS/ISO 8157:2012Fertilizers and Soil Conditioners - VocabularyAgriculture2012VoluntaryCurrentThis standard defines terms relating to fertilizers and soil conditioners.Available on request.
TTS/ISO 8391-1:2009Ceramic Cookware in Contact with Food Release of Lead and Cadmium - Part 1: Method of TestChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies a method of test for the release of lead and cadmium by ceramic... Read MoreAvailable on request
TTS/ISO 8391-2:2009Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible LimitsChemistry2009VoluntaryCurrentThis part of ISO 8391 specifies the permissible limits for the release of lead and cadmium by... Read MoreAvailable on request
TTS/ISO 8560:2008Technical Drawings - Construction Drawings - Representation of Modular Sizes, Lines and GridsTechnical Drawings2008VoluntaryCurrentLays down rules for the representation of modular sizes, lines and grids on construction drawings.... Read MoreAvailable on request
TTS/ISO 8601:2008Data Elements and Interchange Formats - Information Interchange - Representation of Dates and TimesGeneralities2008VoluntaryCurrentApplicable whenever representation of dates in the Gregorian calendar, times in 24-hour timekeeping... Read MoreAvailable on request
TTS/ISO 9001:2015Quality Management Systems - RequirementsQuality2015VoluntaryCurrentThis standard specifies requirements for a quality management system when an... Read MoreAvailable on request
TTS/ISO 9004:2010Managing for the Sustained Success of an Organization - a Quality Management ApproachQuality2010VoluntaryCurrentProvides guidelines beyond the requirements given in ISO 9001 in order to consider both the... Read MoreAvailable on request
TTS/ISO 90-1:2009Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open Top CansMechanical Equipment and Packaging2009VoluntaryCurrentThis part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes,... Read MoreAvailable on request
TTS/ISO/IEC 10007:2007Quality Management - Guidelines for Configuration ManagementQuality2007VoluntaryCurrentGives guidance on the use of configuration management within an organization. It is applicable to... Read MoreAvailable on request
TTS/ISO/IEC 17007:2010Conformity Assessment - Guidance for Drafting Normative Documents Suitable for Use for Conformity AssessmentQuality2010VoluntaryCurrentPovides principles and guidance for developing normative documents that contain: - specified... Read MoreTT $630.00
TTS/ISO/IEC 17011:2007Conformity Assessment - General Requirements for Accreditation Bodies Accrediting Conformity Assessment BodiesQuality2007VoluntaryCurrentSpecifies general requirements for accreditation bodies assessing and accrediting conformity... Read MoreAvailable on request
TTS/ISO/IEC 17020:2008General Criteria for the Operation of Various Types of Bodies Performing InspectionQuality2008VoluntaryCurrentSpecifies general criteria for the competence of impartial bodies performing inspection... Read MoreAvailable on requestStatus under review
TTS/ISO/IEC 17025:2008General Requirements for the Competence of Testing and Calibration LaboratoriesQuality2008VoluntaryCurrentSpecifies the general requirements for the competence to carry out tests and/or calibrations,... Read MoreAvailable on request
TTS/ISO/IEC 80000-6:2009Quantities and Units - Part 6: ElectromagnetismGeneralities2009VoluntaryCurrentProvides names, symbols, and definitions for quantities and units of electromagnetism.Available on request
TTS/ISO/IEC GUIDE 60:2007Conformity Assessment - Code of Good PracticeQuality2007VoluntaryCurrentThis Guide recommends good practices for all elements of conformity assessment, including normative... Read MoreAvailable on request
TTS/ISO/TR 10013:2008Guidelines for Quality Management System DocumentationQuality2008VoluntaryCurrentProvides guidelines for the development and maintenance of the documentation necessary to ensure an... Read MoreAvailable on request
TTS/ISO/TR 10017:2008Guidance on Statistical Techniques for ISO 9001:2000Quality2008VoluntaryCurrentProvides guidance on the selection of appropriate statistical techniques that may be useful to an... Read MoreAvailable on request
TTS/ISO/TR 22869: 2008Medical Laboratories - Guidance on Implementation of ISO 15189: 2003Quality2008VoluntaryCurrentProvides guidance to medical laboratories describing how a medical laboratory can implement a... Read MoreAvailable on request
TTS/ISO/TS 29001:2010Petroleum, Petrochemical and Natural Gas Industries - Sector-Specific Quality Management Systems - Requirements for Product and Service Supply OrganizationsQuality2010VoluntaryCurrentISO/TS 29001:2010 defines the quality management system for product and service supply... Read MoreAvailable on request
TTS/NFPA 52:2017Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems (1st Revision)Mechanical Equipment and Packaging2017VoluntaryCurrentThis code shall apply to the design, installation, operation, and maintenance of compressed natural... Read MoreTT $ 280.00 + VAT
TTS/OHSAS 18001: 2008Occupational Health and Safety Management Systems - RequirementsHealth and Safety2008VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for... Read MoreAvailable on request
TTS/OHSAS 18002: 2010Occupational Health and Safety Management Systems - Guidelines for the Implementation of OHSAS 18001: 2007Health and Safety2010VoluntaryCurrentThis Occupational Health and Safety Assessment Series (OHSAS) Guidelines provides generic advice on... Read MoreAvailable on request
TTS/UL 1012:2008Power Units other than Class 2Electrical Products2008CompulsoryCurrentThese requirements cover portable, stationary, and fixed power units having an input rating of 600... Read MoreAvailable on request
TTS/UL 1028: 2010Hair Clipping and Shaving AppliancesElectrical Products2010CompulsoryCurrent1.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with... Read MoreAvailable on request
TTS/UL 1310:2008Class 2 Power UnitsElectrical Products2008CompulsoryCurrentThese requirements cover indoor and outdoor use Class 2 power supplies and battery chargers... Read MoreAvailable on request
TTS/UL 1492: 2008Audio - Video Products and AccessoriesTelecommunications2008CompulsoryCurrent1.1 These requirements cover audio and video products intended for use on supply circuits in... Read MoreAvailable on request
TTS/UL 1598: 2008LuminairesElectrical Products2008CompulsoryCurrentThis Standard applies to luminaires for use in non-hazardous locations and that are intended for... Read MoreAvailable on request
TTS/UL 1647: 2010Motor-Operated Massage and Exercise MachinesElectrical Products2010CompulsoryCurrent1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators,... Read MoreAvailable on request
TTS/UL 1703:2015Flat-plate photovoltaic modules and panelsRenewable energy systems2015VoluntaryCurrentThese requirements cover flat-plate photovoltaic modules and panels intended for installation on or... Read MoreAvailable on request
TTS/UL 174: 2009Household Electric Storage Tank Water HeatersElectrical Products2009CompulsoryCurrentThese requirements cover household electric storage tank and small capacity storage tank water... Read MoreAvailable on request
TTS/UL 1741:2015Inverters, converters, controllers and interconnection system equipment for use with distributed energy resourcesRenewable energy systems2015VoluntaryCurrentThese requirements cover inverters, converters, charge controllers, and interconnection system... Read MoreAvailable on request
TTS/UL 1778: 2008Uninterruptible Power SystemsElectrical Products2008CompulsoryCurrentThis Standard applies to uninterruptible power systems (UPS). The primary function of the UPS for... Read MoreAvailable on request
TTS/UL 20:2009General-Use Snap SwitchesElectrical Products2009VoluntaryCurrentThe requirements of this Standard apply to manually operated, general-use snap switches for... Read MoreAvailable on request
TTS/UL 2